Additive manufacturing of Ti-6242 lattice structures: manufacturability limits and mechanical performance of solid and hollow strut architectures
Source abstract
Abstract
Metallic lattice metamaterials achieve exceptional mechanical performance through the synergy of topological architecture and parent material properties. Despite this dual dependence, development has remained largely confined to a limited set of alloys—namely aluminum (AlSi10Mg), stainless steel (SS316L), and Ti-6Al-4V (Ti-64). These materials, however, share a critical limitation: poor suitability for sustained high-temperature service. This work breaks that paradigm by presenting the first comprehensive study on the laser-based powder bed fusion (PBF-LB) manufacturability and compressive response of the high-temperature titanium alloy Ti-6Al-2Sn-4Zr-2Mo (Ti-6242), implemented in both solid- and hollow-strut lattice architectures. A systematic manufacturability study established geometric limits: solid struts down to 0.3 mm in diameter, and hollow struts with a wall thickness of 0.1 mm and a minimum inner diameter of 0.6 mm. Beyond these minimum feature constraints, the manufacturability window was further explored by fabricating simple cubic (SC) and octet-truss (OT) topologies in solid and hollow strut configurations. The resulting lattices spanned relative densities ( ) from 3.5% to 57.54%, with compressive strengths ranging from 4.2 ± 0.28 MPa to 460 ± 4.5 MPa. Benchmarking against Ti-64 lattices reveals that Ti-6242 delivers strength enhancements up to 48.6 ± 1.8% in ultimate strength and 62.8 ± 0.1% in yield strength at identical . Collectively, this work provides a processing–structure–property database for Ti-6242 lattice metamaterials and establishes a new materials trajectory beyond Ti-64 for additively manufactured architected structures.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Additive Manufacturing Materials and Processes · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Development of a multifunctional panel for aerospace use through SLM additive manufacturing10.1016/j.procir.2017.12.202 ↗
2. Design of metallic bone by additive manufacturing10.1016/j.scriptamat.2019.01.022 ↗
3. Steering column support topology optimization including lattice structure for metal additive manufacturing10.1177/0954406220947121 ↗
4. Impact resistance of different types of lattice structures manufactured by SLM10.17973/MMSJ.2016_12_2016186 ↗
5. SLM lattice structures: properties, performance, applications and challenges10.1016/j.matdes.2019.108137 ↗
6. Cubic lattice structures of Ti6Al4V under compressive loading: towards assessing the performance for hard tissue implants alternative10.3390/ma14143866 ↗
7. High-strength porous biomaterials for bone replacement: a strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints10.1016/j.actbio.2015.10.048 ↗
8. The Gibson-Ashby model for additively manufactured metal lattice materials: its theoretical basis, limitations and new insights from remedies10.1016/j.cossms.2023.101081 ↗
9. Low-density, high-strength metal mechanical metamaterials beyond the Gibson-Ashby model10.1016/j.mattod.2023.07.018 ↗
10. Additively manufactured functionally graded lattices: design, mechanical response, deformation behavior, applications, and insights10.1007/s11837-023-06190-x ↗
11. Design for additive manufacturing of functionally graded lattice structures: a design method with process induced anisotropy consideration10.1007/s40684-019-00173-7 ↗
12. Mechanical performance of a node reinforced body-centred cubic lattice structure manufactured via selective laser melting10.1016/j.scriptamat.2020.08.015 ↗
13. Effects of nodal fillets and external boundaries on compressive response of an octet truss10.1016/j.actamat.2017.12.060 ↗
14. Impact of node geometry on the effective stiffness of non-slender three-dimensional truss lattice architectures10.1016/j.eml.2018.06.004 ↗
15. Interpenetrating lattices with enhanced mechanical functionality
16. Machine learning based lattice generation method derived from topology optimisation
17. Topology optimisation for design and additive manufacturing of functionally graded lattice structures using derivative-aware machine learning algorithms
18. Hollow-walled lattice materials by additive manufacturing: design, manufacture, properties, applications and challenges10.1016/j.cossms.2021.100940 ↗
19. Manufacturability of Ti-Al-4V hollow-walled lattice struts by laser powder bed fusion10.1007/s11837-021-04914-5 ↗
20. Ti-6Al-4V hollow-strut lattice materials by laser powder bed fusion
21. Understanding the superior mechanical properties of hollow-strut metal lattice materials10.1016/j.scriptamat.2023.115341 ↗
22. Ti–6Al–4V hybrid-strut lattice metamaterials: a design strategy for improved performance10.1016/j.msea.2024.146918 ↗
23. AlSi10Mg hollow-strut lattice metamaterials by laser powder bed fusion10.1039/D3MA00813D ↗
24. Design and evaluation of the mechanical performance of hollow BCC truss AlSi10Mg lattice structures10.3390/met15040464 ↗
25. Geometrical parameters and mechanical properties of Ti6Al4V hollow-walled lattices10.1016/j.msea.2022.142667 ↗
26. Large deformation response of additively-manufactured FCC metamaterials: from octet truss lattices towards continuous shell mesostructures10.1016/j.ijplas.2017.02.003 ↗
27. Controlled deformation of metallic hollow octet-truss lattice structures10.1016/j.tws.2026.114639 ↗
28. Engineering hollow-strut lattice nodes for enhanced load-bearing with cubic symmetry10.1016/j.ijmecsci.2025.110923 ↗
29. Titanium multi‐topology metamaterials with exceptional strength
30. A hybrid architectural metamaterial combing plate lattice and hollow-truss lattice with advanced mechanical performances
31. Geometry effect on mechanical properties and elastic isotropy optimization of bamboo-inspired lattice structures
32. Node-reinforced hollow-strut metal lattice materials for higher strength10.1016/j.scriptamat.2023.115547 ↗
33. Grid hollow octet truss lattices that are stable at low relative density10.1016/j.jmps.2025.106068 ↗
34. Multifunctional hollow lattice metamaterials with broadband vibration isolation and high stiffness and strength10.1016/j.engstruct.2025.120873 ↗
35. Composite strut-plate lattice: a high-stiffness design of cellular metamaterial having excellent strength and energy absorption ability
36. Plate-nanolattices at the theoretical limit of stiffness and strength10.1038/s41467-020-15434-2 ↗
37. Thin-plate lattices in AlSi10Mg alloy via laser additive manufacturing: highly enhanced specific strength and recovery
38. Evaluations of cellular lattice structures manufactured using selective laser melting10.1016/j.ijmachtools.2012.06.002 ↗
39. The quasi-static and blast loading response of lattice structures10.1016/j.ijimpeng.2007.10.005 ↗
40. Evaluation of topology-optimized lattice structures manufactured via selective laser melting10.1016/j.matdes.2018.01.023 ↗
41. Mechanical properties of an improved 3D-printed rhombic dodecahedron stainless steel lattice structure of variable cross section10.1016/j.ijmecsci.2018.07.006 ↗
42. Selective laser melting (SLM) of AlSi12Mg lattice structures10.1016/j.matdes.2016.02.127 ↗
43. A hybrid continuum-beam optimisation model: the virtual extensometer method for efficient optimisation of lattice materials10.1007/s40964-024-00766-y ↗
44. Mechanical properties of Ti6Al4V and AlSi12Mg lattice structures manufactured by Selective Laser Melting (SLM)10.1016/B978-0-08-100433-3.00005-1 ↗
45. Inconel 625 lattice structures manufactured by selective laser melting (SLM): mechanical properties, deformation and failure modes10.1016/j.matdes.2018.06.010 ↗
46. Ultralight, ductile metal mechanical metamaterials with super elastic admissible strain (0.1)10.1016/j.jmst.2023.03.043 ↗
47. Mechanical properties of additively manufactured periodic cellular structures and design variations10.1115/1.4050939 ↗
48. Selective electron beam manufactured Ti-6Al-4V lattice structures for orthopedic implant applications: current status and outstanding challenges10.1016/j.cossms.2018.05.002 ↗
49. Optimisation of selective laser melted Ti6Al4V functionally graded lattice structures accounting for structural safety10.3390/ma15249072 ↗
50. Heat treatment effect on the microstructure and elevated temperature tensile property of the Ti6242S alloy fabricated via laser powder bed fusion10.1016/j.jallcom.2022.166656 ↗
51. Polmear David StJohn · 2017
52. Leyens · 2006
53. Welsch · 1993
54. Optimization of the post-process heat treatment strategy for a near-α titanium base alloy produced by laser powder bed fusion10.3390/ma15031032 ↗
55. Selective laser melting of a near‐α Ti6242S alloy for high‐performance automotive parts10.1002/adem.202001194 ↗
56. Effects of direct aging on near-alpha Ti–6Al–2Sn–4Zr–2Mo (Ti-6242) titanium alloy fabricated by selective laser melting (SLM)10.1016/j.msea.2020.139533 ↗
57. Martensite decomposition during post-heat treatments and the aging response of near-α Ti–6Al–2Sn–4Zr–2Mo (Ti-6242) titanium alloy processed by selective laser melting (SLM)10.1142/S2424913020500186 ↗
58. Competing roles of microstructure and defects on the mechanical properties of laser-powder bed fused Ti-6Al-2Sn-4Zr-2Mo alloy10.1007/s40964-024-00728-4 ↗
59. Ultra-Thin-Walled Ti-6242 via laser-based powder bed fusion: manufacturability framework and defect suppression10.1016/j.jallcom.2026.186790 ↗
60. Deformation and failure behaviour of Ti-6Al-4V lattice structures manufactured by selective laser melting (SLM)
61. Iso · 2011
62. 2025
63. Properties and applications of additively manufactured metallic cellular materials: a review10.1016/j.pmatsci.2021.100918 ↗
64. Additive manufacturing of intricate lattice materials: ensuring robust strut additive continuity to realize the design potential
65. Laser powder bed fusion additive manufacturing (LPBF-AM): the influence of design features and LPBF variables on surface topography and effect on fatigue properties10.1080/10408436.2022.2041396 ↗
66. A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications10.1016/j.jmapro.2011.01.004 ↗
67. Mechanical behaviors of SLM additive manufactured octet-truss and truncated-octahedron lattice structures with uniform and taper beams10.1016/j.ijmecsci.2019.105091 ↗
68. Ashby · 2000
69. Recent progress on 3D printing of lightweight metal thin‐walled structures10.1002/adma.202402130 ↗
70. Lattice structures for supersonic passenger aircraft wing: design and optimization10.1134/S0025654424606190 ↗
71. High performance, microarchitected, compact heat exchanger enabled by 3D printing10.1016/j.applthermaleng.2022.118339 ↗
72. Additive manufactured sandwich structures: mechanical characterization and usage potential in small aircraft10.1016/j.ast.2021.106548 ↗