Microstructure and high-temperature tensile properties of a near-eutectic Al-2Fe-2Cr-1Mn-0.7Zr (wt.%) alloy designed for additive manufacturing
Source abstract
Abstract
This study introduces a novel Al-2Fe-2Cr-1Mn-0.7Zr (wt.%) alloy designed for high-temperature applications. The design strategy leverages the alloy's near-eutectic composition to create a printable alloy with refined eutectic intermetallic reinforcements and to take advantage of the supersaturation of slow-diffusing elements (Mn, Zr, and Cr). The as-printed microstructure shows a homogeneous grain structure with coarse columnar grains. The distribution, nature, size and morphology of the intermetallic dispersoids is heterogeneous at the melt pool scale. Coarse facetted Cr-rich precipitates are only found near the melt pool boundaries while the melt pool interiors consist of a refined eutectic structure (interparticle spacing ∼200 nm) with elongated, Fe-rich intermetallics (∼10% in area fraction). The composition of the solid solution is also heterogeneous with higher supersaturations in Mn, Zr, and Cr in the melt pool interiors than at the melt pool boundaries. The high-temperature tensile properties of the as-printed material are evaluated from 100 to 350°C and over four orders of magnitude in strain rate. This alloy shows a very limited decrease in yield strength between 100 and 300°C, nearly no strain rate sensitivity, and maintains a reasonable ductility (elongation to failure ≥5%) despite a reduction in ductility at low strain rate. The role of the refined eutectic structure to confine dislocation motion and mitigate dynamic recovery is emphasized. The role of supersaturation in climb-restricting solutes such as Fe, Mn and Zr is highlighted. A mechanism to rationalize the drop in ductility at elevated temperature and low strain rate is proposed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. An additively manufactured near-eutectic Al-Ce-Ni-Mn-Zr alloy with high creep resistance10.1016/j.actamat.2024.119787 ↗
2. Tensile creep mechanisms of Al-Mn-Sc alloy fabricated by additive manufacturing
3. Mechanical properties and microstructural characterisation including high-temperature performance of Al-Mn-Cr-Zr-based alloys tailored for additive manufacturing10.1016/j.matdes.2024.113160 ↗
4. Additively manufacturable high‐strength aluminum alloys with coarsening‐resistant microstructures achieved via rapid solidification
5. An Al-5Fe-6Cr alloy with outstanding high temperature mechanical behavior by laser powder bed fusion
6. High-temperature strength in an additively manufactured Al-based superalloy with stable nanoscale eutectic cellular networks10.1038/s41467-025-66441-0 ↗
7. Laser-melted Al-3.6Mn-2.0Fe-1.8Si-0.9Zr (wt%) alloy with outstanding creep resistance via formation of α-Al(FeMn)Si precipitates
8. Towards high-temperature applications of aluminium alloys enabled by additive manufacturing10.1080/09506608.2021.1951580 ↗
9. A review of additive manufacturing heat-resistant aluminum alloys: materials, properties and strengthening strategies at high temperature10.1177/09506608251369181 ↗
10. Additive manufacturing of heat-resistant aluminum alloys: a review
11. 3D printing of high-strength aluminium alloys10.1038/nature23894 ↗
12. Optimization of the strength vs. conductivity trade-off in an aluminium alloy designed for laser powder bed fusion10.1016/j.msea.2022.144139 ↗
13. Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting10.1016/j.actamat.2018.04.053 ↗
14. Evidence that the liquid structure affects the nucleation of the primary metastable L12-Al3Zr in additive manufacturing10.1016/j.scriptamat.2022.115212 ↗
15. Ageing response and strengthening mechanisms in a new Al-Mn-Ni-Cu-Zr alloy designed for laser powder bed fusion10.1016/j.actamat.2023.119271 ↗
16. Direct ageing of LPBF Al-1Fe-1Zr for high conductivity and mechanical performance10.1016/j.actamat.2023.119199 ↗
17. An understanding of duplex microstructures encountered during high strength aluminium alloy laser beam melting processing10.1016/j.actamat.2021.117024 ↗
18. A solution to the hot cracking problem for aluminium alloys manufactured by laser beam melting10.1016/j.actamat.2020.07.015 ↗
19. Additive manufacturing and mechanical properties of the dense and crack free Zr-modified aluminum alloy 6061 fabricated by the laser-powder bed fusion
20. Influence of the microstructure on the high temperature ductility of the Al-4Mn-3Ni-2Cu-1Zr aluminium alloy designed for laser powder bed fusion10.1016/j.msea.2025.148559 ↗
21. Coarsening- and creep resistance of precipitation-strengthened Al–Mg–Zr alloys processed by selective laser melting10.1016/j.actamat.2020.02.008 ↗
22. Influence of ageing on the high-temperature mechanical strength of the Al-4Mn-3Ni-2Cu-1Zr alloy produced by laser powder bed fusion10.1016/j.msea.2025.149372 ↗
23. Laser powder bed fusion of a near-eutectic Al–Fe binary alloy: processing and microstructure
24. Managing both high strength and thermal conductivity of a laser powder bed fused Al–2.5Fe binary alloy: effect of annealing on microstructure10.1016/j.msea.2020.140591 ↗
25. Formation of multiple intermetallic phases in a hypereutectic Al–Fe binary alloy additively manufactured by laser powder bed fusion10.1016/j.intermet.2020.106892 ↗
26. A high-strength heat-resistant Al−5.7Ni eutectic alloy with spherical Al3Ni nano-particles by selective laser melting10.1016/j.scriptamat.2021.114034 ↗
27. Coarsening- and creep-resistant, fine-grained Al-Ni-Fe-Zr eutectic alloy by laser powder-bed fusion10.1016/j.msea.2025.149017 ↗
28. Evolution of eutectic microstructure and strength in an Al-Ce-Ni-Mn-Sc-Zr alloy fabricated by laser powder-bed fusion
29. Microstructure and strengthening of Al-6Ce-3Ni-0.7Fe (wt%) alloy manufactured by laser powder-bed fusion
30. Solidification microstructure, aging evolution and creep resistance of laser powder-bed fused Al-7Ce-8Mg (wt%)
31. Development and characterization of a metastable Al-Mn-Ce alloy produced by laser powder bed fusion
32. Evaluation of an Al-Ce alloy for laser additive manufacturing10.1016/j.actamat.2016.12.065 ↗
33. Effect of precipitation-forming elements in a near-eutectic Al-Ce alloy for laser powder bed Fusion
34. Additively-manufactured Al-0.3Zr-0.2Ce-0.2Cu alloy with high creep resistance and electrical conductivity10.1016/j.actamat.2025.121785 ↗
35. Solute-induced strengthening during creep of an aged-hardened Al-Mn-Zr alloy10.1016/j.actamat.2021.117268 ↗
36. Solute-diffusion-controlled dislocation creep in pure aluminium containing 0.026 at.% Fe10.1080/14786430410001690006 ↗
37. Creep ductility limiting mechanisms in an additively manufactured Al-Ce-Ni-Mn-Zr alloy
38. Dynamic recovery in aluminum10.1016/0025-5416(71)90018-8 ↗
39. The columnar to bimodal transition of Al–Cr–Mo–Sc–Zr alloys during laser powder bed fusion10.1016/j.matdes.2026.115770 ↗
40. Three-dimensional modeling of solidification grain structures generated by laser powder bed fusion10.1016/j.mtla.2023.101804 ↗
41. Dynamic and static strain aging in AlFeCrX alloys processed by laser powder bed fusion10.1007/s10853-025-11192-y ↗
42. Microstructure, mechanical properties and thermal stability of a high-strength AlFeCrSi alloy processed by laser powder bed fusion10.1016/j.msea.2025.149687 ↗
43. First-principles study of solute-dislocation interaction in aluminum-rich alloys10.1103/PhysRevB.64.224203 ↗
44. The effects of diffusional relaxation on the creep strength of composites10.1016/0956-7151(91)90090-N ↗
45. On the competition between particle fracture and particle decohesion in metal matrix composites10.1016/j.actamat.2004.06.009 ↗
46. Atomic weights of the elements. Review 2000 (IUPAC Technical report)10.1351/pac200375060683 ↗
47. A reference hydride ratio method for the resolution of Al/Fe peak overlapping in atom probe tomography experiments10.1093/mam/ozaf030 ↗