journal article·2026-09

Exploiting solute segregation and partitioning to the deformation-induced planar defects and nano-martensite in designing ultra-strong Co-Ni base alloys

Akshat Godha, Karthick Sundar, Mayank Pratap Singh, Shashwat Kumar Mishra, Praveen Kumar, B. Govind, Surendra Kumar Makineni

Publisher page

Abstract

Single-phase, multi-elements (three or more) with high concentrations show exceptional tensile strength up to ~ 0.8-1.2 GPa. However, they possess a very low 0.2% yield strength (YS), i.e., they can be permanently deformed at very low-stress levels of 300 to 600 MPa. Here, we reveal by exploiting atomic-scale solute interactions with the deformation-induced structures to design ultra-strong single-phase alloys with YS > 2 GPa. This was achieved by controlled thermomechanical processing that introduces stacking-faults (SFs), nano-twins (NTs), and nano-martensite ε-laths (NMLs) during cold deformation followed by facilitating solute segregation/partitioning to them by tempering at intermediate temperature. We demonstrate the phenomena in a low stacking faulty energy multi-component (face-centered-cubic, fcc structured) Co-33Ni-24Cr alloy (all in at.%) containing 5at.% Mo as a solute. It is also shown that the degree of strengthening after tempering scales up with the fraction of these structures (before tempering) in the alloy microstructure that can be tuned by the amount and temperature of cold deformation. Cold-rolling with 45% and 65% thickness reduction, followed by tempering at 600°C for 4 hours, led to an YS of 1.5 GPa and 2 GPa with elongation to fracture (%El) 14% and 7%, respectively. The YS is further enhanced to ~ 2.2 GPa without reduction in %El upon cryo-rolling followed by tempering. The alloy microstructure is stable at 600°C up to 100 hours and also retains an YS of ~ 1.5 GPa with %El of 18% during tensile test at 600°C. The derived high YS and high-temperature stability are critically a consequence of solute partitioning to the NMLs that we termed as Solute-Partitioned NMLs (SP-NMLs) in the microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Microstructure and mechanical properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. Callister · 2009
2. 2008
3. Facile route to bulk ultrafine-grain steels for high strength and ductility10.1038/s41586-021-03246-3 ↗
4. Work hardening in a steel containing a coarse dispersion of cementite particles10.1016/0001-6160(64)90034-3 ↗
5. Nanostructuring of metals by severe plastic deformation for advanced properties10.1038/nmat1180 ↗
6. Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy10.1038/s41467-020-16085-z ↗
7. Inherent and multiple strain hardening imparting synergistic ultrahigh strength and ductility in a low stacking faulted heterogeneous high-entropy alloy10.1016/j.actamat.2022.118516 ↗
8. Understanding martensite and twin formation in austenitic steels: a model describing TRIP and TWIP effects10.1016/j.actamat.2017.02.004 ↗
9. Twinning-induced plasticity (TWIP) steels10.1016/j.actamat.2017.06.046 ↗
10. Transformation-induced plasticity (TRIP) in advanced steels: a review10.1016/j.msea.2020.140023 ↗
11. New developments of advanced high-strength steels for automotive applications, comptes rendus10.1016/j.crhy.2018.11.004 ↗
12. Nanostructured high‐entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
13. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
14. High entropy alloys: a focused review of mechanical properties and deformation mechanisms10.1016/j.actamat.2019.12.015 ↗
15. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
16. Potential TRIP/TWIP coupled effects in equiatomic CrCoNi medium-entropy alloy10.1016/j.actamat.2022.118049 ↗
17. Novel Co-rich high performance twinning-induced plasticity (TWIP) and transformation-induced plasticity (TRIP) high-entropy alloys10.1016/j.scriptamat.2019.02.018 ↗
18. Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy10.1016/j.actamat.2018.10.017 ↗
19. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
20. Tuning element distribution, structure and properties by composition in high-entropy alloys10.1038/s41586-019-1617-1 ↗
21. Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins10.1038/ncomms4580 ↗
22. Making ultrastrong steel tough by grain-boundary delamination10.1126/science.aba9413 ↗
23. Designing structures with combined gradients of grain size and precipitation in high entropy alloys for simultaneous improvement of strength and ductility10.1016/j.actamat.2022.117847 ↗
24. Brittle intermetallic compound makes ultrastrong low-density steel with large ductility10.1038/nature14144 ↗
25. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗
26. A sustainable ultra-high strength Fe18Mn3Ti maraging steel through controlled solute segregation and α-Mn nanoprecipitation10.1038/s41467-022-30019-x ↗
27. High dislocation density–induced large ductility in deformed and partitioned steels10.1126/science.aan0177 ↗
28. Ductilization of 2.6-GPa alloys via short-range ordered interfaces and supranano precipitates10.1126/science.adr4917 ↗
29. Strengthening in MULTIPHASE (MP35N) alloy: part I. ambient temperature deformation and recrystallization10.1007/BF02660873 ↗
30. The secondary hardening phenomenon in strain-hardened MP35N alloy10.1016/S1359-6454(98)00235-3 ↗
31. Suzuki hardening and segregation in Co0.95Cr0.8Fe0.25Ni1.8Mo0.475 high-entropy alloys10.1016/j.scriptamat.2022.115260 ↗
32. Suzuki segregation behavior and mechanism in a Co–Cr–Fe–Ni–Mo high-entropy alloy
33. Microstructural analysis and its correlation to anneal hardening in a cobalt-nickel-based superalloy10.1016/j.actamat.2024.120705 ↗
34. New insights on the interaction of solutes with the defects during creep deformation of CMSX4 Ni-based single crystal superalloy10.1016/j.actamat.2024.120360 ↗
35. Prior austenite grain size and tempering effects on the dislocation density of low-C Nb–Ti microalloyed lath martensite10.1016/j.scriptamat.2015.05.036 ↗
36. Revealing the maximum strength in nanotwinned copper10.1126/science.1167641 ↗
37. Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles10.1016/j.actamat.2011.11.009 ↗
38. Theory of transformation-mediated twinning10.1093/pnasnexus/pgac282 ↗
39. Twinning in metastable high-entropy alloys10.1038/s41467-018-04780-x ↗
40. The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy10.1016/j.actamat.2017.04.033 ↗
41. Stacking fault energies of face-centered cubic concentrated solid solution alloys10.1016/j.actamat.2017.05.001 ↗
42. Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy10.1038/ncomms15719 ↗
43. Correlation between stacking fault energy and deformation microstructure in high-interstitial-alloyed austenitic steels10.1016/j.actamat.2010.01.056 ↗
44. Atomic-scale in situ observations of reversible phase transformation assisted twinning in a CrCoNi medium-entropy alloy10.1021/acs.nanolett.3c04516 ↗
45. Unraveling dual phase transformations in a CrCoNi medium-entropy alloy10.1016/j.actamat.2021.117112 ↗
46. Unexpected sluggish martensitic transformation in a strong and super-ductile high-entropy alloy of ultralow stacking fault energy10.1016/j.actamat.2023.119389 ↗
47. Generalized stacking fault energies, ductilities, and twinnabilities of CoCrFeNi-based face-centered cubic high entropy alloys10.1016/j.scriptamat.2017.06.014 ↗
48. The nucleation mechanism of martensite and its interaction with dislocation dipoles in dual-phase high-entropy alloys10.1016/j.jallcom.2022.164685 ↗
49. Bidirectional phase transformations in multi‐principal element alloys: mechanisms, physics, and mechanical property implications10.1002/advs.202407283 ↗
50. Bidirectional transformation enables hierarchical nanolaminate dual‐phase high‐entropy alloys10.1002/adma.201804727 ↗
51. Influence of stress on martensite nucleation10.1016/0001-6160(53)90105-9 ↗
52. Evolution of dislocations and twins in a strong and ductile nanotwinned steel10.1016/j.actamat.2016.03.057 ↗
53. Solute stabilization for HCP-FCC transitions: Co-Mo10.1007/BF02644388 ↗
54. Segregation assisted microtwinning during creep of a polycrystalline L12-hardened Co-base superalloy10.1016/j.actamat.2016.10.048 ↗
55. On the atomic solute diffusional mechanisms during compressive creep deformation of a Co-Al-W-Ta single crystal superalloy10.1016/j.actamat.2019.11.035 ↗
56. Solute segregation and deviation from bulk thermodynamics at nanoscale crystalline defects10.1126/sciadv.1601796 ↗
57. Compositive role of refractory element Mo in improving strength and ductility of face-centered-cubic complex concentrated alloys10.1016/j.actamat.2023.119030 ↗
58. A new class of high strength high temperature cobalt based γ–γ′ Co–Mo–Al alloys stabilized with Ta addition10.1016/j.actamat.2015.06.034 ↗
59. Utilizing local phase transformation strengthening for nickel-base superalloys10.1038/s43246-021-00210-6 ↗
60. Strain induced grain boundary migration in high purity aluminum10.1063/1.1699614 ↗
61. Growth twins and deformation twins in metals10.1146/annurev-matsci-070813-113304 ↗
62. Role of interfaces in kinetics of internal shape changes10.1179/030634582790427019 ↗
63. High-precision atomic-scale strain mapping of nanoparticles from STEM images10.1016/j.ultramic.2022.113561 ↗
64. Energetics of cobalt alloys and compounds and solute–vacancy binding in fcc cobalt: a first-principles database10.1016/j.actamat.2016.10.065 ↗
65. Strengthening in multi-principal element alloys with local-chemical-order roughened dislocation pathways10.1038/s41467-019-11464-7 ↗
66. Impact of short-range ordering on yield strength of high manganese austenitic steels10.1016/j.msea.2014.07.016 ↗
67. Theory of strengthening in fcc high entropy alloys10.1016/j.actamat.2016.07.040 ↗
68. A simplified model connecting lattice distortion with friction stress of Nb-based equiatomic high-entropy alloys10.1080/21663831.2019.1610105 ↗
69. High modulus reinforcement alloys
70. The type of dislocation interaction as the factor determining work hardening10.1016/0025-5416(80)90175-5 ↗
71. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗