Investigating microstructural and mechanical property uniformity in 316L stainless steel alloys processed via laser powder bed fusion process
Source abstract
Abstract
Additive manufacturing (AM) offers exceptional design flexibility and material efficiency, making it a critical technology in future aerospace, automotive, medical, and defense industries. However, achieving consistent mechanical properties across AM-processed parts remains a challenge due to anisotropy introduced by the layered printing process. This study investigates the microstructure and mechanical performance of laser powder bed fusion (L-PBF) processed 316L stainless steel alloys to assess uniformity and anisotropic behavior. X-ray diffraction (XRD), scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and Energy Dispersive Spectroscopy (EDS) were employed to examine the phase composition, grain structure, grain misorientation, and elemental composition at different locations within the build volume. Mechanical properties were also evaluated through density, hardness, and tensile testing. The results show a high relative density (>99%) and consistent hardness (>220 HV) in all samples, demonstrating the effectiveness of the L-PBF process when parts are fabricated using optimized parameters. Tensile testing revealed higher yield strength (YS) and ultimate tensile strength (UTS) in horizontal and 45° builds compared to vertical builds due to reduced influence of interlayer defects. Fractography confirmed the presence of refined cellular substructures and ductile fracture with smaller dimples in horizontal and 45° builds, leading to improved mechanical performance. This study suggests that optimized parameters can achieve a high degree of phase homogeneity and reduce inherent heterogeneity in L-PBF-processed parts. It also highlights the importance of build orientation when designing components for applications demanding high tensile strength and reliability.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Additive manufacturing technology: potential implications for US manufacturing competitiveness
2. Additive manufacturing in armor and military applications: research, materials, processing technologies, perspectives, and challenges10.1016/j.jmrt.2023.11.030 ↗
3. Microstructural evolution and high-temperature deformation behavior of wire Arc additively manufactured inconel 718 forging preforms: toward a hybrid additive–forging process10.1016/j.jmrt.2025.12.213 ↗
4. State-of-the-art of selective laser melting process: a comprehensive review10.1016/j.jmsy.2022.04.002 ↗
5. Scanning strategy in selective laser melting (SLM): a review10.1007/s00170-021-06810-3 ↗
6. Review of selective laser melting of magnesium alloys: advantages, microstructure and mechanical characterizations, defects, challenges, and applications10.1016/j.jmrt.2022.05.102 ↗
7. Critical review of comparative study of selective laser melting and investment casting for thin-walled parts10.3390/ma16237346 ↗
8. Additive manufacturing: a comprehensive review10.3390/s24092668 ↗
9. Powder bed fusion techniques in metal 3D printing: a review10.4028/p-nY5hlx ↗
10. Halaby, A.M., Y.M. Youssef, and M.A. El-Sayed, COMPREHENSIVE OVERVIEW ON ADDITIVE MANUFACTURING OF LATTICE STRUCTURES USING SELECTIVE LASER MELTING.
11. Selective laser melting and spark plasma sintering: a perspective on functional biomaterials10.3390/jfb14100521 ↗
12. Effects of process parameters and scan strategy on the microstructure and density of stainless steel 316 L produced via laser powder bed fusion10.1016/j.jalmes.2023.100027 ↗
13. Tensile properties of SS316L produced by LPBF: influence of specimen dimensions and surface condition10.1016/j.matchar.2023.113117 ↗
14. Influence of substrate temperature on microstructural and mechanical properties of 316L stainless steel consolidated by laser powder bed fusion10.1007/s00170-020-06316-4 ↗
15. Microstructure and mechanical properties of stainless steel addictively manufactured via laser powder bed fusion in high-dense process parameter window10.1016/j.msea.2025.148033 ↗
16. Effect of thermomechanical processing on porosity evolution and mechanical properties of L-PBF AISI 316L stainless steel10.3390/met15070789 ↗
17. Investigating build orientation-induced mechanical anisotropy in additive manufacturing 316L stainless steel10.1016/j.msea.2023.145308 ↗
18. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review10.1016/j.matdes.2017.11.021 ↗
19. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
20. On the anisotropic mechanical properties of selective laser-melted stainless steel10.3390/ma10101136 ↗
21. Effect of heat treatment on the microstructure and anisotropy in mechanical properties of A357 alloy produced by selective laser melting10.1016/j.matdes.2018.05.026 ↗
22. Assessment of mechanical properties and fatigue performance of a selective laser melted nickel-base superalloy Inconel 71810.1016/j.msea.2019.05.007 ↗
23. Microstructural and tensile properties anisotropy of selective laser melting manufactured in 62510.3390/ma13214829 ↗
24. Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing10.1016/j.jallcom.2015.01.256 ↗
25. Cellular Ti–6Al–4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting10.1016/j.actbio.2008.03.013 ↗
26. Electron beam melting of Ti–48Al–2Cr–2Nb alloy: microstructure and mechanical properties investigation10.1016/j.intermet.2010.11.017 ↗
27. A comparative investigation of the reliability of biodegradable components produced through additive manufacturing technology10.3390/polym16050615 ↗
28. Process-microstructure-corrosion of additively manufactured steels: a review
29. A new approach for a flexible powder production for additive manufacturing10.1016/j.promfg.2016.11.012 ↗
30. Fine spherical powder production during gas atomization of pressurized melts through melt nozzles with a small inner diameter10.1016/j.powtec.2019.09.023 ↗
31. Additive manufacturing of metallic materials: a review10.1007/s11665-017-2747-y ↗
32. Femtosecond laser produced hydrophobic hierarchical structures on additive manufacturing parts10.3390/nano8080601 ↗
33. Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel10.1016/j.jmatprotec.2017.05.042 ↗
34. Pistorius, P.C. and M. Du Toit. Low-Nickel Austenitic Stainless Steels: Metallurgical Constraints.
35. Selective laser melting of stainless steel 316L with low porosity and high build rates10.1016/j.matdes.2016.05.035 ↗
36. The long-term corrosion behaviors of SLM 316L stainless steel immersed in artificial saliva
37. Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts10.1016/j.matdes.2016.03.111 ↗
38. Tribological and corrosion properties of Al–12Si produced by selective laser melting10.1557/jmr.2014.133 ↗
39. Kamariah, M., et al. Effect of Heat Treatment on Mechanical Properties and Microstructure of Selective Laser Melting 316L Stainless Steel. IOP Publishing.
40. Selective laser melting of 304L and 316L stainless steels: a comparative study of microstructures and mechanical properties10.1002/srin.202270071 ↗
41. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder10.1016/j.actamat.2012.11.052 ↗
42. Mechanical behavior of selective laser melted 316L stainless steel10.1016/j.msea.2017.04.058 ↗
43. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium10.1016/j.actamat.2012.04.006 ↗
44. An investigation into microstructure and high-temperature mechanical properties of selective laser-melted 316L stainless steel toward the development of hybrid Ampliforge process10.1007/s00170-020-05870-1 ↗
45. Microstructure and mechanical properties of 316L austenitic stainless steel processed by different SLM devices10.1007/s00170-020-05371-1 ↗
46. Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting10.1016/j.msea.2019.01.110 ↗
47. Constitution diagram for stainless steel weld metal
48. Comparison of different additive manufacturing methods for 316l stainless steel10.3390/ma14216504 ↗
49. Microstructure and mechanical properties of wire arc additively manufactured bimetallic structure of austenitic stainless steel and low carbon steel10.1007/s11665-022-06856-8 ↗
50. Steels in additive manufacturing: a review of their microstructure and properties10.1016/j.msea.2019.138633 ↗
51. Phase composition of austenitic stainless steels in additive manufacturing: a review10.3390/met11071052 ↗
52. Understanding grain evolution in additive manufacturing through modeling
53. Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing10.1016/j.actamat.2016.03.063 ↗
54. Grain structure and texture of the SLM single track10.1016/j.jmatprotec.2020.116591 ↗
55. A comparison on metallurgical behaviors of 316L stainless steel by selective laser melting and laser cladding deposition10.1016/j.msea.2016.12.112 ↗
56. Effect of grain size on thermal and mechanical stability of austenite in metastable austenitic stainless steel10.2355/isijinternational.53.1224 ↗
57. Effects of grain size on tensile property and fracture morphology of 316L stainless steel10.1016/j.matlet.2019.07.058 ↗
58. Influence of strain rate and temperature on tensile deformation and fracture behavior of type 316L (N) austenitic stainless steel10.1007/s11661-013-1978-2 ↗
59. Tensile properties of spark plasma sintered AISI 316L stainless steel with unimodal and bimodal grain size distributions10.1016/j.msea.2018.05.064 ↗
60. Microstructure and fracture behavior of 316L austenitic stainless steel produced by selective laser melting10.1016/j.jmst.2016.06.016 ↗
61. Laser powder bed fusion and hot forging of 316L stainless steel: a hybrid additive manufacturing approach for enhanced performance10.3390/ma18214909 ↗
62. Effects of build direction on tensile and creep properties of 316L stainless steel produced by selective laser melting10.1111/ffe.13322 ↗
63. Orientation dependent tensile properties of a selective-laser-melt 316L stainless steel10.1016/j.msea.2021.141808 ↗
64. Fine-grain-embedded dislocation-cell structures for high strength and ductility in additively manufactured steels10.1016/j.msea.2020.139736 ↗
65. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
66. Strengthening mechanisms and strain hardening behavior of 316L stainless steel manufactured by laser‐based powder bed fusion10.1002/adem.202201230 ↗
67. Microstructure, mechanical properties, and deformation behaviour of LPBF 316L via post-heat treatment10.1080/17452759.2024.2405623 ↗