journal article·2026-07Open access

Microstructure and crystallographic phase sensitivity to process parameters in a bespoke PBF-LB 17-4 PH alloy

D. Della Crociata, I. Maskery, H. Eskandari Sabzi, P.E.J. Rivera-Díaz-del-Castillo, R. Hague, M. Simonelli

Abstract

17-4 PH stainless steel made by powder bed fusion – laser beam (PBF-LB) has exceptional strength and ductility, brought about by transformation induced plasticity (TRIP). Here, we present an investigation into how PBF-LB laser energy density influences the microstructure, content of retained FCC austenite and the mechanical properties of a bespoke 17-4 PH alloy. X-ray diffraction experiments with in situ tensile loading were carried out to track the development of TRIP behaviour. Ex situ analysis provided microstructure and texture in the undeformed and deformed conditions. We found that the microstructure and phase composition are sensitive to the laser energy density ( E L ) during fabrication and, by exploring the process window, it is possible to vary the evolution of the material properties upon plastic deformation. Material made with a low- E L of 0.29 J/mm comprised 11.1% retained austenite, compared with just 3.8% when E L was raised to 0.67 J/mm. Consequently, the yield strength of the low- E L material was 44.6% lower than that of the high- E L material. This provides an opportunity to tune the properties of 17-4 PH stainless steel made by PBF-LB, with the aim creating high energy absorbing structures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgical and Alloy Processes · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Hsiao · 2002
2. Effect of powder chemical composition on the as-built microstructure of 17-4 PH stainless steel processed by selective laser melting
3. F. Rest, M. Brackenwagen, V. Droßbach, 17-4 PH stainless steel, (n.d.). www.sd-metals.com.
4. Selective laser melting technology: from the single laser melted track stability to 3D parts of complex shape
5. Microstructural development and technical challenges in laser additive manufacturing: case Study with a 316L industrial part10.1007/s11663-015-0310-5 ↗
6. Effect of heat treatments on microstructural evolution of additively manufactured and wrought 17-4PH stainless steel10.1016/j.matdes.2018.07.015 ↗
7. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium10.1016/j.actamat.2012.04.006 ↗
8. A comparative study of microstructure and hydrogen embrittlement of selective laser melted and wrought 17–4 PH stainless steel10.1016/j.msea.2020.139363 ↗
9. Evidence of austenite by-passing in a stainless steel obtained from laser melting additive manufacturing
10. Microstructures and properties of 17-4 PH stainless steel fabricated by selective laser melting10.1016/S2238-7854(12)70029-7 ↗
11. POWDER VARIATION AND MECHANICAL PROPERTIES FOR SLM 17-4 PH STAINLESS STEEL
12. Microstructure and mechanical behavior of 17-4 precipitation hardenable steel processed by selective laser melting10.1007/s11665-014-1226-y ↗
13. On the microstructure and texture evolution in 17-4 PH stainless steel during laser powder bed fusion: towards textural design10.1016/j.jmst.2021.12.015 ↗
14. Prediction of martensitic transformation and residual stress field on 17–4 PH stainless steel fabricated by laser powder bed fusion
15. Experimental cooling rates during high-power laser powder bed fusion at varying processing conditions10.1016/j.jallcom.2023.171773 ↗
16. Exploiting thermal strain to achieve an in-situ magnetically graded material10.1016/j.matdes.2018.11.011 ↗
17. H. Gu, H. Gong, D. Pal, K. Rafi, T. Starr, B. Stucker, Influences of Energy Density on Porosity and Microstructure of Selective Laser Melted 17-4PH Stainless Steel, n.d.
18. Experimental investigation on selective laser melting of 17-4PH stainless steel10.1016/j.optlastec.2016.07.012 ↗
19. Effect of processing parameters on the fractions of martensite in 17-4 PH stainless steel fabricated by selective laser melting10.1016/j.jallcom.2020.157758 ↗
20. Towards prediction of microstructure during laser based additive manufacturing process of Co-Cr-Mo powder beds10.1016/j.matdes.2020.109117 ↗
21. Comparative study of the microstructure between a laser beam melted 17-4PH stainless steel and its conventional counterpart10.1016/j.msea.2021.141718 ↗
22. Genetic design of precipitation-hardening stainless steels for additive manufacturing10.1016/j.actamat.2024.120018 ↗
23. Additive manufacturing of 17-4 PH stainless steel: Post-processing heat treatment to achieve uniform reproducible microstructure10.1007/s11837-015-1754-4 ↗
24. Transformation-induced plasticity (TRIP) in advanced steels: a review
25. Advanced High Strength Steels (AHSS) for automotive applications − tailored properties by smart microstructural adjustments10.1002/srin.201700210 ↗
26. 2021
27. 2022 · 1
28. Preliminary investigation of keyhole phenomena during single layer fabrication in laser additive manufacturing of stainless steel
29. I12: the joint engineering, environment and processing (JEEP) beamline at diamond light source10.1107/S1600577515003513 ↗
30. High-energy X-ray applications: current status and new opportunities10.1017/S0885715617001191 ↗
31. Complete elliptical ring geometry provides energy and instrument calibration for synchrotron-based two-dimensional X-ray diffraction10.1107/S0021889813022437 ↗
32. Processing two-dimensional X-ray diffraction and small-angle scattering data in DAWN 210.1107/S1600576717004708 ↗
33. Schwarz · 2024
34. Influence of SLM printing parameters and hot isostatic pressure treatment on the structure and properties of CuNi3Si1 alloy10.1016/j.jallcom.2023.169531 ↗
35. Introduction to Aerospace Materials · 2012 · 232
36. Functional fatigue during superelastic load cycling of Ti2448 (Ti-24Nb-4Zr-8Sn, wt%)10.1016/j.mtla.2023.101719 ↗
37. Texture control during laser deposition of nickel-based superalloy10.1016/j.scriptamat.2012.06.014 ↗
38. Evolution of solidification texture during additive manufacturing10.1038/srep16446 ↗
39. Influence of aging treatment regimes on microstructure and mechanical properties of selective laser melted 17-4 PH steel10.3390/mi14040871 ↗
40. Microstructural characterization and mechanical properties of additively manufactured 17–4PH stainless steel
41. Effect of heat treatment on microstructure and mechanical properties of 17-4PH stainless steel manufactured by laser-powder bed fusion10.1016/j.jmrt.2023.08.283 ↗
42. Crystallite size of pure tin oxide ceramics and its growth during sintering determined from XRD line broadening – a methodological case study and a practitioners’ guide10.1016/j.ceramint.2021.09.076 ↗
43. Approximation of crystallite size and microstrain via XRD line broadening analysis in TiSiN thin films10.1016/j.vacuum.2011.10.011 ↗
44. Effect of sol-gel pH on XRD peak broadening, lattice strain, ferroelectric domain orientation, and optical bandgap of nanocrystalline Pb 1.1(Zr0.52Ti0.48)O310.1016/j.jpcs.2013.09.005 ↗
45. Stress-induced nanoscale phase transition in superelastic NiTi by in situ X-ray diffraction10.1016/j.actamat.2015.02.024 ↗
46. In-situ generation of high-strength AISI 1045 steel with SiO2 nano-precipitation by selective laser melting (SLM)10.1016/j.jmapro.2023.03.064 ↗
47. Mechanical properties and microstructural characterization of selective laser melted 17-4 PH stainless steel10.1108/RPJ-12-2015-0192 ↗
48. Homogenization on solution treatment and its effects on the precipitation-hardening of selective laser melted 17-4PH stainless steel10.1016/j.jmst.2023.04.055 ↗
49. The effect of energy density on texture and mechanical anisotropy in selective laser melted Inconel 71810.1016/j.matdes.2020.108642 ↗
50. Homogenization timing effect on microstructure and precipitation strengthening of 17–4PH stainless steel fabricated by laser powder bed fusion
51. Investigation on the precipitate morphology and fraction characterization by atomic force microscopy10.1016/j.ultramic.2023.113796 ↗
52. Analysis of the strain-induced martensitic transformation of retained austenite in cold rolled micro-alloyed TRIP steel10.1002/srin.200806160 ↗
53. Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes10.1016/j.jmst.2019.03.003 ↗
54. Microstructure and mechanical properties of selective laser melted 17–4 PH stainless steel; Build direction and heat treatment processes
55. Plastic deformation behavior and strengthening mechanism of SLM 316L reinforced by micro-TiC particles10.1016/j.msea.2023.145557 ↗
56. Hierarchical microstructure and enhanced mechanical properties of SLM-fabricated GH5188 Co-superalloy10.1016/j.msea.2021.142276 ↗
57. Lean duplex TRIP steel: role of ferrite in the texture development, plastic anisotropy, martensitic transformation kinetics, and stress partitioning10.1016/j.mtla.2020.100952 ↗