Microstructure and mechanical properties of wire-fed laser additive manufacturing Inconel 718 single-bead wall
Source abstract
Abstract
Wire-fed Laser Additive Manufacturing (WLAM) of Inconel 718 holds broad application prospects in the fabrication of complex structural components. However, during the manufacturing process, heat input significantly influences the precipitation of brittle Laves phases and the formation of internal defects in the clad layers, which may impair the mechanical properties of the components. In this study, single-wall structures of Inconel 718 were fabricated via WLAM using different laser powers. A comprehensive analysis was conducted on the microstructure, microhardness, tensile properties, and tensile fracture mechanisms of the as-deposited specimens. The results indicate that as the heat input increases, the distribution of Laves phases in the specimens gradually shifts from a distinct linear arrangement to a more discrete pattern. However, compared to specimens produced at laser powers of 920 W and 1120 W, those manufactured at 1020 W exhibit superior performance in terms of hardness, tensile strength, yield strength, and elongation along both the building direction (BD) and travel direction (TD). Fracture analysis reveals that due to the mismatch in elongation between detrimental phases such as Laves phases and the matrix, debonding occurs during tensile loading, leading to the formation of microvoids. These voids further expand into microcracks, and eventual coalescence of multiple microcracks causes fracture along the converged regions. This study provides valuable theoretical insights and practical guidance for optimizing the WLAM process of Inconel 718 and exploring suitable heat input windows.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Two-step heat treatment for laser powder bed fusion of a nickel-based superalloy with simultaneously enhanced tensile strength and ductility
2. Asymmetric pore distribution in PBF-LB/M In718 thin-walled structures: contour morphology and welding quality10.1016/j.jmapro.2025.04.030 ↗
3. Improving the deposition efficiency and mechanical properties of additive manufactured Inconel 625 through hot wire laser metal deposition10.1016/j.jmatprotec.2023.118175 ↗
4. Investigation of heat transfer, dendrite growth, Nb segregation, competitive growth, and remelting process during wire-arc directed energy deposition of IN718 using a multi-scale, multi-dimension, and multi-area phase field model(M3-PFM)10.1016/j.ijheatmasstransfer.2024.126455 ↗
5. Exploring elevated temperature fretting wear behaviour of wrought and laser powder bed fusion IN718 superalloy10.1016/j.triboint.2024.109279 ↗
6. In-situ nanoscale precipitation behavior and strengthening mechanism of WC/IN718 composites manufactured by laser powder bed fusion10.1016/j.compositesb.2024.111727 ↗
7. Mechanical characterization and modelling of Inconel 718 material behavior for machining process assessment10.1016/j.msea.2016.11.054 ↗
8. Laser powder bed fusion of SS316L-IN718 functionally graded materials: processing, microstructure, and properties10.1016/j.msea.2025.148341 ↗
9. Study on in situ laser shock modulation of molten pool and defects in wire-feed laser additive manufacturing of steel to aluminum alloy10.1016/j.tws.2024.112326 ↗
10. Tailoring the Crystalline structures and mechanical properties of IN718 alloy repaired by wire-fed electron beam directed energy deposition through a custom-designed heat treatment process10.1016/j.msea.2024.147274 ↗
11. Evaluation of microstructure, mechanical and corrosion properties of IN718 superalloy components fabricated by laser direct energy deposition10.1016/j.jallcom.2025.183236 ↗
12. Tailoring Laves phase and mechanical properties of directed energy deposited Inconel 718 thin-wall via a gradient laser power method10.1016/j.msea.2021.141822 ↗
13. Achieving balanced mechanical properties in laser powder bed fusion processed Inconel 718 superalloy through a simplified heat treatment process10.1016/j.jmst.2024.06.057 ↗
14. Application of hot wire laser directed energy deposition for efficient fabrication of large nickel-based alloy components: process, microstructure, and mechanical properties10.1016/j.jmatprotec.2025.118789 ↗
15. An operando synchrotron study on the effect of wire melting state on solidification microstructures of Inconel 718 in wire-laser directed energy deposition10.1016/j.ijmachtools.2023.104089 ↗
16. Wire-feed laser additive manufacturing of dissimilar metals via dual molten pool interface interlocking mechanism10.1007/s11431-022-2303-x ↗
17. Improved Inconel 718 superalloy repaired performance on 304 stainless steel shafts via recrystallization and Laves phase suppression in hybrid additive-subtractive manufacturing10.1016/j.jmrt.2025.07.011 ↗
18. Ni-based superalloy 718 fabricated by arc-based directed energy deposition: an experimentally-based strengthening mechanisms analysis10.1016/j.msea.2025.148417 ↗
19. Xiao · 2017
20. Wang · 2022
21. Multiscale investigation of thermomechanical and compositional developments in Ni alloy 718 under laser processing10.1016/j.actamat.2025.121145 ↗
22. Electron microscopy study of direct laser deposited IN71810.1016/j.matchar.2015.06.017 ↗
23. Hot workability and microstructure evolution of the nickel-based superalloy Inconel 718 produced by laser metal deposition10.1016/j.jallcom.2018.01.029 ↗
24. Determining synthesis region of the single wall carbon nanotubes in arc plasma volume10.1016/j.carbon.2016.05.061 ↗
25. Study on the element segregation and Laves phase formation in the carbon nanotubes reinforced IN718 superalloy by laser cladding10.1016/j.powtec.2019.07.063 ↗
26. Precipitation kinetics of secondary phases induced by heat accumulation in the deposit of Inconel 718
27. Microstructure, mechanical property and heat treatment schedule of the Inconel 718 manufactured by low and high power laser powder bed fusion10.1016/j.msea.2022.144517 ↗
28. Influence of cooling rate on microstructure, dislocation density, and associated hardness of laser direct energy deposited Inconel 71810.1016/j.surfcoat.2024.131575 ↗
29. Effect of laser melt schedule on the microstructure of additively manufactured IN718 superalloy
30. Microstructure and properties of Ti6Al4V-xB alloys fabricated by concurrent wire-powder laser metal deposition additive manufacturing10.1016/j.msea.2025.149085 ↗
31. Geometrically necessary boundaries, incidental dislocation boundaries and geometrically necessary dislocations10.1016/S1359-6462(02)00358-5 ↗
32. Grain structure evolution in Inconel 718 during selective electron beam melting10.1016/j.msea.2016.05.046 ↗
33. Thermodynamic behavior and microstructure evolution of Inconel 718 alloy by laser metal deposition10.1016/j.ijheatmasstransfer.2024.126330 ↗
34. Dilute rare earth element mediated Hall-Petch relation of Mg alloys10.1016/j.jmrt.2025.10.208 ↗
35. Effect of adaptive control of cooling rate on microstructure and mechanical properties of laser additively manufactured Inconel 718 thin walls10.1016/j.matchar.2024.114032 ↗
36. Vacuum electron beam welding behavior of Al/Cu bimetallic composite plate
37. Effect of heat treatment on microstructure and mechanical properties of selective laser melted Inconel 718 alloy10.1371/journal.pone.0309156 ↗
38. The failure mechanism of 50% laser additive manufactured Inconel 718 and the deformation behavior of Laves phases during a tensile process10.1007/s00170-016-9901-9 ↗
39. The effects of hot isostatic pressing temperature and subsequent heat treatment on the microstructure and tensile properties of laser powder bed fused IN718 nickel-based superalloy10.1016/j.jallcom.2025.179407 ↗
40. Fracture mechanisms induced by microporosity and precipitates in isothermal fatigue of polycrystalline nickel based superalloy10.1016/j.msea.2018.06.095 ↗
41. Effect of Laves-decorated dendrite structure on hydrogen embrittlement in selective laser-melted nickel-based alloy10.1016/j.jmst.2025.03.051 ↗