Role of Si-decorated cell structure in cryogenic tensile behavior of additively manufactured AlSi10Mg alloy
Source abstract
Abstract
Laser powder bed fusion (LPBF)-fabricated AlSi10Mg alloy exhibits markedly increased strain hardening at cryogenic temperatures because Si-assisted cell heterogeneity intensifies the accumulation of geometrically necessary dislocations and produces a strong hetero deformation induced hardening effect. However, coarse cells along melt pool boundaries promote severe strain localization that leads to early fracture without necking. This combined strengthening and weakening effect of the Si-assisted cell structure governs cryogenic tensile behavior.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Bar-Cohen · 2016 · 455
2. Materials properties characterization in the most extreme environments10.1557/s43577-022-00441-z ↗
3. Merkel · 2019
4. Fedotowsky · 2024 · 1
5. Assessment of operational non-time-critical Sentinel-6A Michael Freilich radio occultation data: insights into tropospheric GNSS signal cut-off strategies and processor improvements
6. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
7. Ancillary processes for high-quality additive manufacturing: a review of microstructure and mechanical properties improvement10.1007/s12540-023-01444-4 ↗
8. Recent advancements in Additive Manufacturing (AM) techniques: a forward-looking review10.1007/s12540-022-01380-9 ↗
9. 3D printing of high-strength aluminum alloys10.1038/nature23894 ↗
10. 3D printed Mg-NiTi interpenetrating-phase composites with high strength, damping capacity, and energy absorption efficiency
11. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
12. Review of high-strength aluminium alloys for additive manufacturing by laser powder bed fusion10.1016/j.matdes.2022.110779 ↗
13. Cryogenic deformation behavior of 6061 aluminum alloy tube under biaxial tension condition10.1016/j.jmatprotec.2022.117532 ↗
14. The improvement of deformability in AA7075 alloy through cryogenic treatment and its correlation with microstructural evolution and FE modelling10.1038/s41598-024-67518-4 ↗
15. Dynamic recovery in aluminum10.1016/0025-5416(71)90018-8 ↗
16. Stacking fault energies in aluminium10.1088/0953-8984/4/50/033 ↗
17. Cryogenic deformation behaviour of aluminium alloy 6061–T610.1007/s12540-023-01594-5 ↗
18. 3D printing of aluminium alloys: additive manufacturing of aluminium alloys using selective laser melting10.1016/j.pmatsci.2019.100578 ↗
19. A parametric study on the L-PBF process of an AlSi10Mg alloy for high-speed productivity of automotive prototype parts10.4150/jpm.2024.00325 ↗
20. Evolution of microscopic strains, stresses, and dislocation density during in-situ tensile loading of additively manufactured AlSi10Mg alloy10.1016/j.ijplas.2021.102946 ↗
21. Role of melt pool boundary condition in determining the mechanical properties of selective laser melting AlSi10Mg alloy10.1016/j.msea.2018.10.083 ↗
22. Unravelling the multi-scale structure-property relationship of laser powder bed fusion processed and heat-treated AlSi10Mg10.1038/s41598-021-85047-2 ↗
23. A precipitation-hardened AlSi10Mg alloy fabricated using selective laser melting10.1016/j.msea.2022.143164 ↗
24. Stress partitioning behavior of an AlSi10Mg alloy produced by selective laser melting during tensile deformation using in situ neutron diffraction10.1016/j.jallcom.2016.06.011 ↗
25. Fine-tuning of mechanical properties of additively manufactured AlSi10Mg alloys by controlling the microstructural heterogeneity10.1016/j.jallcom.2023.170348 ↗
26. Effect of cell characteristics on mechanical properties of AlSi10Mg alloy fabricated by laser powder bed fusion10.1016/j.msea.2024.146537 ↗
27. Flow behaviors and deformation mechanism of WQ-tempered Al–Li alloy at cryogenic temperatures10.1016/j.msea.2021.140971 ↗
28. Effects of cryogenic temperature and pre-stretching on mechanical properties and deformation characteristics of a peak-aged AA6082 extrusion10.1016/j.msea.2016.10.049 ↗
29. Mechanical properties of rolled and aged AA6061 sheets at room-temperature and cryogenic environments10.1016/j.jallcom.2020.158449 ↗
30. Enhanced strength and ductility in an additively manufactured Al10SiMg alloy at cryogenic temperatures10.1038/s43246-025-00793-4 ↗
31. Extremely low-temperature tensile behavior of 316L stainless steel additively manufactured by laser powder bed fusion10.1016/j.msea.2025.149460 ↗
32. Extremely low temperature mechanical behavior of in-situ oxide containing 304L stainless steel fabricated by laser powder bed fusion10.1016/j.jmst.2025.02.030 ↗
33. Cryogenic tensile behavior of carbon-doped CoCrFeMnNi high-entropy alloys additively manufactured by laser powder bed fusion
34. Exceptional strength-ductility combination of additively manufactured high-entropy alloy matrix composites reinforced with TiC nanoparticles at room and cryogenic temperatures
35. On resolution and luminosity of a neutron diffraction spectrometer for single crystal analysis10.1016/0029-554X(60)90101-4 ↗
36. Revealing the strengthening contribution of stacking faults, dislocations and grain boundaries in severely deformed LPBF AlSi10Mg alloy
37. Microstructure evolution during in-situ heating of AlSi10Mg alloy powders and additive manufactured parts
38. A solutal interaction mechanism for the columnar-to-equiaxed transition in alloy solidification10.1007/s11661-003-0311-x ↗
39. On the strain rate-dependent deformation mechanism of CoCrFeMnNi high-entropy alloy at liquid nitrogen temperature10.1080/21663831.2017.1323807 ↗
40. Thermally activated deformation and the rate controlling mechanism in CoCrFeMnNi high entropy alloy10.1016/j.msea.2016.11.078 ↗
41. Temperature-dependent hardening contributions in CrFeCoNi high-entropy alloy10.1016/j.actamat.2021.117371 ↗
42. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
43. Temperature dependence of silicon hardness: experimental evidence of phase transformations
44. Temperature dependence of the flow stress of Fe–18Mn–0.6C–xAl twinning-induced plasticity steel10.1016/j.actamat.2013.07.042 ↗
45. Correlation between temperature dependence of critical resolved shear stress and nature of solute distribution in aluminium-magnesium alloys10.1007/BF00723793 ↗
46. On the temperature dependence of the flow stress of metals and solid solutions10.1007/BF00551470 ↗
47. Correlation between the temperature dependence of yield stress and the nature of solute distribution in Cu–Ni solid solutions10.1016/j.jallcom.2010.03.122 ↗
48. On the strength and stress-relaxation response of fine-grain Cu–42.2 at.% Zn–0.6 at.% Pb alloy polycrystals10.1016/j.jallcom.2009.01.027 ↗
49. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗
50. Heterostructured materials: superior properties from hetero-zone interaction10.1080/21663831.2020.1796836 ↗
51. Hetero-deformation-induced stress in additively manufactured 316L stainless steel10.1080/21663831.2020.1775149 ↗
52. Role of BCC phase on tensile behavior of dual-phase Al0.5CoCrFeMnNi high-entropy alloy at cryogenic temperature10.1016/j.msea.2019.01.041 ↗
53. Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg10.1016/j.actamat.2020.10.001 ↗
54. Influence of sub-cell structure on the mechanical properties of AlSi10Mg manufactured by laser powder bed fusion10.1016/j.msea.2020.138976 ↗
55. Enhanced tensile ductility of an additively manufactured AlSi10Mg alloy by reducing the density of melt pool boundaries10.1016/j.scriptamat.2022.114954 ↗