Argon plasma–induced compressive residual stress for simultaneous strength–ductility enhancement in a CoCrFeMnNi high-entropy alloy
Source abstract
Abstract
Surface modification techniques, such as shot peening and ultrasonic nanocrystal surface modification, are widely used to improve wear, corrosion, and fatigue resistance, as well as strength by tailoring the near-surface microstructure. However, the severe plastic deformation accompanying these processes often results in high dislocation densities and limited strain accommodation capability, leading to a deterioration of ductility. In this study, argon plasma bombardment introduces a graded compressive residual stress field at the surface while reducing dislocation density in a CoCrFeMnNi high-entropy alloy. This surface modification simultaneously increases yield strength, tensile strength, uniform elongation, and total elongation, demonstrating a simple route to enhance strength–ductility synergy without severe surface deformation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Ultrahigh strength triggered by BCC and B2 eutectic-phase interfaces in a novel FeCrVNiAl high-entropy alloy10.1080/21663831.2024.2383352 ↗
2. Eutectic high-entropy alloys and their applications in materials processing engineering: a review10.1016/j.jmst.2023.10.057 ↗
3. Precise microstructural tailoring in high-entropy alloys for superior mechanical performances10.1080/21663831.2025.2520562 ↗
4. Achieving sustainable strain hardening in a carbon-doped CuFeMnNi high-entropy alloy via dual-level heterogeneous microstructures10.1016/j.jallcom.2023.168831 ↗
5. Laser directed energy deposited eutectic high entropy alloy with tailored lamella structure via interlayer pause strategy
6. Achieving ambient superformability in a lightweight refractory medium-entropy alloy via stagewise adaptive microstructural buffers10.1016/j.jmst.2025.04.071 ↗
7. Strategic enhancement of CoCrFeMnNi high-entropy alloy mechanical properties through a high-strength nano-scale nitride layer without geometrical or tolerance constraints10.1016/j.ijplas.2024.104235 ↗
8. Enhancing strength-ductility combination of Fe–Ni–Cr–Al–Ti high-entropy alloys via co-precipitation of sigma and L21 phases10.1016/j.msea.2024.147062 ↗
9. Synthesis of high entropy alloy for surface modification by friction stir process: recent advances and future directions10.1007/s12540-023-01584-7 ↗
10. Laser peening: a review of the factors, effects, applications, comparison with shot peening and State-of-the-Art10.1007/s12540-023-01517-4 ↗
11. Wear characteristics of metals10.1016/0301-679X(76)90077-3 ↗
12. Corrosion properties of chemically modified metal surfaces10.1016/S0013-4686(97)00221-1 ↗
13. Surface modification and enhanced wear performance through severe shot peening treatment in 316L stainless steel manufactured by metal injection moulding10.1016/j.jmrt.2024.02.102 ↗
14. Effect of high-energy shot peening on the corrosion behavior and chloride threshold concentration of AISI 316L stainless steel rebar in simulated concrete pore solution10.1016/j.jmrt.2024.03.230 ↗
15. Review of shot peening processes to obtain nanocrystalline surfaces in metal alloys10.1179/026708408X334087 ↗
16. Ultrasonic nanocrystal surface modification: processes, characterization, properties, and applications10.3390/nano12091415 ↗
17. Recent developments and novel applications of laser shock peening: a review10.1002/adem.202001216 ↗
18. A metallographic and quantitative analysis of the influence of stacking fault energy on shock-hardening in Cu and Cu–Al alloys10.1016/S1359-6454(00)00335-9 ↗
19. Optimizing the coupled effects of hall-petch and precipitation strengthening in a Al0.3CoCrFeNi high entropy alloy10.1016/j.matdes.2017.02.072 ↗
20. Synergistic improvement of micro-tensile strength and ductility in CoCrNiMo medium-entropy alloys: Dynamic hall-petch effect dependent on deformation twinning10.1016/j.jallcom.2025.182629 ↗
21. Compressive residual stress introduced by shot peening10.1016/S0924-0136(97)00213-6 ↗
22. Effect of residual stresses on mechanical properties and interface adhesion strength of SiN thin films10.1016/j.tsf.2009.03.043 ↗
23. Enhanced strength-ductility synergy via high dislocation density-induced strain hardening in nitrogen interstitial CrMnFeCoNi high-entropy alloy10.1016/j.jmst.2022.09.020 ↗
24. Kinetics of flow and strain-hardening10.1016/0001-6160(81)90112-7 ↗
25. Microstructure and mechanical properties of CoCrFeMnNi high entropy alloy with ultrasonic nanocrystal surface modification process10.1016/j.jmst.2020.02.083 ↗
26. Multi-layered heterostructured CoCrFeMnNi high-entropy alloy processed using direct energy deposition and ultrasonic nanocrystalline surface modification10.1016/j.jmrt.2022.10.099 ↗
27. Effects of surface peening on residual stress and microstructure of nickel-base alloy 182 and 52 M welds10.1007/s12540-024-01824-4 ↗
28. Effects of ultrasonic surface rolling and plasma nitriding on microstructure and properties of 690TT alloy10.1088/2051-672X/ac49de ↗
29. Effects of residual stress and surface roughness on the fatigue life of nickel aluminium bronze alloy under laser shock peening10.1016/j.engfracmech.2021.107524 ↗
30. A review on peening processes and its effect on surfaces10.1007/s00170-022-09021-6 ↗
31. Improving the hardness of high entropy nitride (Cr0.35Al0.25Nb0.12Si0.08V0.20)N coatings via tuning substrate temperature and bias for anti-wear applications10.1016/j.surfcoat.2020.126417 ↗
32. Tuning the mechanical properties of CrCoFeMnNi high entropy alloy via cold spray additive manufacturing associated with heat treatment10.1016/j.msea.2024.146214 ↗
33. Superior strength and ductility in a C-containing CoCrFeNiMn high-entropy alloy with heterogeneous microstructure10.1016/j.msea.2024.146397 ↗
34. Effects of selective laser melting process parameters on structural, mechanical, tribological and corrosion properties of CoCrFeMnNi high entropy alloy10.1007/s12540-024-01694-w ↗
35. Enhanced corrosion resistance of gradient structured CoCrFeMnNi high entropy alloy by laser surface heat-treatment process10.1016/j.intermet.2024.108635 ↗
36. Temperature dependencies of the elastic moduli and thermal expansion coefficient of an equiatomic, single-phase CoCrFeMnNi high-entropy alloy10.1016/j.jallcom.2014.11.061 ↗
37. Effect of strain rate sensitivity and mesh size on constitutive equation fitting using finite element analysis
38. Reaching unconventionally large hall-petch coefficients in face-centered cubic high-entropy alloys10.1080/21663831.2024.2337211 ↗
39. High dislocation density TWIP steel with an excellent combination of strength and plasticity10.1016/j.jmrt.2024.05.137 ↗
40. Mechanistic insights into deformation, load redistribution, and stress partitioning in high-strength dual-phase medium-entropy alloys10.1016/j.msea.2025.148818 ↗
41. Effects of Ti content on the microstructure and mechanical properties of Al0.2CoCrFeNi2Tix high-entropy alloys10.1007/s12540-024-01803-9 ↗
42. Laser directed energy deposited Al0.8Nb0.5Ti2V2Zr0.5 lightweight refractory high entropy alloy: regionalization of microstructure characteristics and strengthening mechanisms10.1016/j.msea.2024.147610 ↗
43. Oxidation behavior of mechanically alloyed high-entropy alloys: a review10.1002/adem.202401102 ↗
44. Effect of plasma interface treatment on the microstructure, residual stress profile, and mechanical properties of PVD TiN coatings on Ti-6Al-4V substrates10.1016/j.surfcoat.2021.127058 ↗
45. Tensile properties and microstructural evolution of 17–4 PH stainless steel fabricated by laser hybrid additive manufacturing technology10.1016/j.ijplas.2024.103885 ↗
46. Surface mechanical property and residual stress stability of nanostructured CNT/Al-Cu-Mg composites induced by shot peening10.1016/j.matchar.2024.114515 ↗
47. Impact of uneven distribution of grain characteristics on yield strength and martensitic transformation of as-hot-rolled medium-entropy alloys10.1016/j.jmst.2023.09.007 ↗
48. Ceramic insert enabled build plate thermal isolation for enhanced microstructure and residual stress mitigation in laser-based powder bed fusion of metals
49. Harnessing competitive interplay between precipitation and lattice distortion for strong and ductile medium-entropy alloy10.1016/j.msea.2025.148642 ↗
50. A dislocation-density-based crystal plasticity model for FCC nanocrystalline metals incorporating thermally-activated depinning from grain boundaries10.1016/j.ijplas.2023.103863 ↗
51. Controlling of cellular substructure and its effect on mechanical properties of FeCoCrNiMo0.2 high entropy alloy fabricated by selective laser melting10.1016/j.msea.2024.146547 ↗
52. Strengthening mechanism in ultra low carbon martensitic steel10.2355/isijinternational.52.710 ↗
53. Stress–strain curves of metallic materials and post-necking strain hardening characterization: a review10.1111/ffe.13134 ↗
54. Effect of interface on mechanical properties and formability of Ti/Al/Ti laminated composites10.1016/j.jmrt.2021.07.021 ↗
55. Influence of ultrasonic surface rolling process on the microstructure and rotating-bending fatigue properties of 7075-T6 aluminum alloys10.1016/j.jmrt.2025.01.009 ↗
56. Laser shock peening optimized microstructure stabilizes compressive residual stress to improve fatigue performance of high-strength aluminum alloy hole structure10.1016/j.jmst.2025.01.045 ↗