Effect of ZrB2 particle addition on strength-ductility improvement of Al–4Fe matrix composites by laser power bed fusion
Source abstract
Abstract
This study explores the effect of ZrB 2 particle addition on the microstructure and mechanical properties of Al–4Fe alloys fabricated by laser powder bed fusion (LPBF). High-melting-point, chemically stable ZrB 2 particles were incorporated to simultaneously improve mechanical strength and ductility of the alloys over a wide temperature range. Microstructural and phase analyses confirmed a uniform distribution of ZrB 2 particles without harmful interfacial reaction products during the LPBF process. Significant grain refinement in Al–4Fe matrix was clearly achieved from 54.5 μm to 17.9 μm by addition of ZrB 2 particles. The ZrB 2 /Al-4Fe composite exhibited improvements in both strength and ductility compared to the unreinforced Al–4Fe alloy from ambient temperature to 400 °C. Strengthening was mainly attributed to grain refinement, load transfer, and dislocation generation from the mismatch in the coefficient of thermal expansion between ZrB 2 and Al–4Fe matrix, whereas Orowan strengthening was negligible due to the micron-scale size ZrB 2 particles. Enhancement in ductility of the composite was evidenced by abundant dimple features near Zr-rich regions, indicating promoted void nucleation and coalescence that enabled localized strain accommodation. These findings demonstrate that ZrB 2 particles act both strengthening and toughening agents, highlighting the potential of ZrB 2 -reinforced Al-Fe composites for elevated-temperature structural applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Aluminum Alloys Composites Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Towards high-temperature applications of aluminium alloys enabled by additive manufacturing10.1080/09506608.2021.1951580 ↗
2. Cryogenic and elevated temperature strengths of an Al−Zn−Mg−Cu alloy modified with Sc and Zr10.1007/s11661-006-1051-5 ↗
3. Improved high-temperature aluminum alloys containing cerium10.1007/s11665-019-3884-2 ↗
4. Application of aluminum and aluminum alloys in engineering10.18485/aeletters.2018.3.2.2 ↗
5. Alloys for aeronautic applications: state of the art and perspectives10.3390/met9060662 ↗
6. High temperature tensile and wear behaviour of aluminum silicon alloy10.1016/j.msea.2010.09.020 ↗
7. Microstructural evolution in rapidly solidified Al-Fe alloys: an alternative explanation10.1007/BF02659002 ↗
8. On the origin of a remarkable increase in the strength and stability of an Al rich Al-Ni eutectic alloy by Zr addition10.1016/j.actamat.2019.03.025 ↗
9. Thermal stability of aluminum–cerium binary alloys containing the Al–Al11Ce3 eutectic10.1016/j.msea.2021.140973 ↗
10. Plastic deformation of Al13Fe4 particles in Al–Al13Fe4 by high-speed compression10.1016/S0921-5093(02)00712-8 ↗
11. A creep-resistant additively manufactured Al-Ce-Ni-Mn alloy10.1016/j.actamat.2022.117699 ↗
12. Laser-melted Al-3.6Mn-2.0Fe-1.8Si-0.9Zr (wt%) alloy with outstanding creep resistance via formation of α-Al(FeMn)Si precipitates
13. Microstructure selection maps for Al–Fe alloys10.1016/0956-7151(95)00039-X ↗
14. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
15. 3D printing of aluminium alloys: additive manufacturing of aluminium alloys using selective laser melting10.1016/j.pmatsci.2019.100578 ↗
16. Characterization of Al–Fe–V–Si heat-resistant aluminum alloy components fabricated by selective laser melting10.1557/jmr.2015.110 ↗
17. Laser powder bed fusion of a near-eutectic Al–Fe binary alloy: processing and microstructure
18. Managing both high strength and thermal conductivity of a laser powder bed fused Al–2.5Fe binary alloy: effect of annealing on microstructure10.1016/j.msea.2020.140591 ↗
19. Design of Al–Fe–Mn alloy for both high-temperature strength and sufficient processability of laser powder bed fusion
20. A review on micromechanical methods for evaluation of mechanical behavior of particulate reinforced metal matrix composites10.1007/s10853-020-04715-2 ↗
21. Developments in the aluminum metal matrix composites reinforced by micro/nano particles – a review10.1177/0021998319865307 ↗
22. An investigation of mechanical properties and corrosion resistance of Al2618 alloy reinforced with Si3N4, AlN and ZrB2 composites10.1016/j.jallcom.2015.08.205 ↗
23. Effect of ZrB2 on microstructural, mechanical and corrosion behaviour of aluminium (AA7178) alloy matrix composite prepared by the stir casting route10.1016/j.ceramint.2021.01.158 ↗
24. An epitaxial model for heterogeneous nucleation on potent substrates10.1007/s11661-012-1495-8 ↗
25. Interfacial thermal conductance of in situ aluminum-matrix nanocomposites10.1007/s10853-021-06176-7 ↗
26. Kinetics and dynamics of surface thermal oxidation in Al-ZrB2 nanocomposites10.1016/j.corsci.2020.108890 ↗
27. Effect of TiB2 particles on microstructure and crystallographic texture of Al-12Si fabricated by selective laser melting10.1016/j.jallcom.2019.01.327 ↗
28. High-temperature mechanical properties of AlSi10Mg specimens fabricated by additive manufacturing using selective laser melting technologies (AM-SLM)
29. Microstructure and properties of a high temperature Al–Ce–Mn alloy produced by additive manufacturing10.1016/j.actamat.2020.07.014 ↗
30. Coarsening- and creep resistance of precipitation-strengthened Al–Mg–Zr alloys processed by selective laser melting10.1016/j.actamat.2020.02.008 ↗
31. Microstructure, tensile properties and thermal stability of AlMgSiScZr alloy printed by laser powder bed fusion10.1016/j.jmst.2020.08.033 ↗
32. An additively manufactured AlCuMnZr alloy microstructure and tensile mechanical properties10.1016/j.mtla.2020.100758 ↗
33. Microstructural and mechanical characterization of aluminum matrix composites produced by laser powder bed fusion10.1002/adem.201700180 ↗
34. Additive manufacturing of aluminum metal matrix composites: mechanical alloying of composite powders and single track consolidation with laser powder bed fusion
35. Influences of Zr and V addition on the crystal chemistry of θ-Al13Fe4 and the grain refinement of α-Al in an Al-4Fe alloy based on experiment and first-principle calculations10.3390/cryst14100879 ↗
36. Effect of Fe, Si and Cooling Rate on the Formation of Fe- and Mn-rich Intermetallics in Al–5Mg–0.8Mn Alloy10.1016/j.jmst.2015.10.010 ↗
37. High-temperature strength sustained by nano-sized eutectic structure of Al–Fe alloy manufactured by laser powder bed fusion10.1016/j.msea.2022.142782 ↗
38. Formation of multiple intermetallic phases in a hypereutectic Al–Fe binary alloy additively manufactured by laser powder bed fusion10.1016/j.intermet.2020.106892 ↗
39. A novel route for predicting the cracking of inoculant-added AA7075 processed via laser powder bed fusion
40. Direct ageing of LPBF Al-1Fe-1Zr for high conductivity and mechanical performance10.1016/j.actamat.2023.119199 ↗
41. Solidification microstructure of laser additive manufactured Ti–6Al–2Zr–2Sn–3Mo–1.5Cr–2Nb titanium alloy10.1016/j.jmst.2015.11.019 ↗
42. Effect of ZrB2 particles on the microstructure and mechanical properties of hybrid (ZrB2 + Al3Zr)/AA5052 insitu composites10.1016/j.jallcom.2015.07.096 ↗
43. Effects of in situ generated ZrB2 nano-particles on microstructure and tensile properties of 2024Al matrix composites10.1016/j.jallcom.2014.01.117 ↗
44. Mechanism of grain refinement in aluminium10.1016/0956-7151(94)00405-7 ↗
45. Review on study of internal load transfer in metal matrix composites using diffraction techniques10.1016/j.msea.2022.142973 ↗
46. Comparative evaluation of the mechanical properties of al–si–cu–ni–mg alloys with distinct spatial architectures at ambient and high temperatures
47. Nanoparticle promoted solution treatment by reducing segregation in AA703410.1016/j.msea.2021.141691 ↗
48. Highly ductile Zn-2Fe-WC nanocomposite as biodegradable material10.1007/s11661-020-05878-y ↗
49. Consideration of orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: a model for predicting their yield strength10.1016/j.scriptamat.2005.12.017 ↗
50. Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility10.1016/j.actamat.2017.02.062 ↗
51. Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall–Petch effect10.1016/j.msea.2011.10.043 ↗
52. Synergic effects of interfacial compounds and strengthening mechanisms in enhancing mechanical strength of Al-B4C-GNPs hybrid nanocomposite
53. TiB2 reinforced aluminum based in situ composites fabricated by stir casting10.1016/j.msea.2014.12.033 ↗
54. Thermophysical properties of ZrB2 and ZrB2–SiC ceramics10.1111/j.1551-2916.2008.02268.x ↗
55. The effect of grain size on the elevated temperature yield strength of polycrystalline aluminum10.1016/0956-716X(91)90165-W ↗
56. Microstructure-property analysis of ZrB2/6061Al hierarchical nanocomposites fabricated by direct melt reaction10.1016/j.matchar.2015.12.012 ↗
57. Active learning framework to optimize process parameters for additive-manufactured Ti-6Al-4V with high strength and ductility10.1038/s41467-025-56267-1 ↗