journal article·2026-05Open access

The role of martensite decomposition and β-stabilizer segregation to interfaces in Ti-6Al-4V with an initial dual-phase α+α' microstructure

N. Pfeffer, A. Bezold, J. Vollhüter, O. Nagel, M. Weiser, A. Stark, S. Neumeier, H.W. Höppel

Abstract

The strength of dual-phase α+α' Ti-6Al-4V sheet material can be significantly enhanced through additional short-time annealing lasting only a few minutes, as shown in previous work and attributed to nano-scale microstructural changes within the martensitically transformed β-phase. However, the microstructural mechanisms remained unclear. In this study, the microstructures of the as-received state, the solution heat treated state with α+α' microstructure and additionally (short-time) annealed states were compared to provide deeper insight into these microstructural processes. Advanced high-resolution techniques, including high resolution scanning transmission electron microscopy, atom probe tomography and high-energy X-ray diffraction, were combined with tensile testing for mechanical assessment. Short-time annealing of metastable Ti-6Al-4V α+α' microstructures at 570 °C for 180 s triggered an α' → α+β transformation, comprising: (i) chemical changes, involving V- and Fe-segregation to interfaces, and the formation of V-/Fe-enriched clusters; and (ii) crystallographic decomposition, manifested by α' lattice relaxation and lattice parameter changes. With prolonged annealing, element partitioning and β precipitation progressed from the clusters and nuclei located along interfaces, accompanied by slight changes in the lattice parameters of both phases. After 3 h, the microstructure approached equilibrium, with stabilized α and β phase fractions and lattice parameters. The strengthening achieved by short-time annealing is attributed to suppression of reorientation-induced plasticity in prior α'-martensite and dislocation-cluster/precipitate/solute interactions. In summary, this work reveals microstructural evolution and processes during martensite decomposition in dual-phase Ti-6Al-4V, including β-stabilizer segregation to interfaces. Further, it discusses their role in strength enhancement, providing guidance for developing effective heat treatment and processing routes.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Hydrogen embrittlement and corrosion behaviors in metals · Shape Memory Alloy Transformations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. Property optimization through microstructural control in titanium and aluminum alloys10.1016/S0921-5093(98)01169-1 ↗
2. Tuning the scale of α precipitates in β-titanium alloys for achieving high strength10.1016/j.scriptamat.2018.05.040 ↗
3. Hierarchically ordered coherent interfaces-driven ultrahigh specific-strength and toughness in a nano-martensite titanium alloy10.1016/j.actamat.2023.119540 ↗
4. Hierarchical nano-martensite-engineered a low-cost ultra-strong and ductile titanium alloy10.1038/s41467-022-33710-1 ↗
5. Microstructure design and mechanical properties in a near-α Ti–4Mo alloy10.1016/j.actamat.2015.06.043 ↗
6. Designing ultra-strong and ductile hierarchical titanium alloys via interstitial solute-mediated multi-morphologic α-nanoprecipitates10.1016/j.actamat.2023.119082 ↗
7. Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys10.1016/S0921-5093(97)00778-8 ↗
8. An overview of the thermomechanical processing of α/β titanium alloys: current status and future research opportunities10.1007/s11661-020-05625-3 ↗
9. On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium10.1016/S0031-8914(34)80244-3 ↗
10. Crystallographic aspects of the beta to alpha transformation in titanium10.1016/0001-6160(53)90113-8 ↗
11. The crystallography of the β-α transformation in titanium10.1016/0001-6160(54)90101-7 ↗
12. Field emission microscopy of an allotropic transformation: α − β titanium10.1103/PhysRev.100.1619 ↗
13. The effect of microstructure on the mechanical properties of two-phase titanium alloys10.1016/S0924-0136(02)00248-0 ↗
14. Zwicker · 2014
15. Zur Umwandlung von α+β - titanlegierungen mit Aluminium10.1515/ijmr-1963-540109 ↗
16. Phase transformations during cooling in α+β titanium alloys10.1016/S0921-5093(97)00802-2 ↗
17. The kinetics of phase transformations during continuous cooling of the Ti6Al4V alloy from the single-phase ß range10.2478/v10172-011-0077-x ↗
18. Martensite formation and decomposition in alloys of titanium containing β-stabilizing elements
19. Elastic moduli and tensile and physical properties of heat-treated and quenched powder metallurgical Ti-6Al-4V alloy10.1007/BF02670293 ↗
20. Design rules to develop solute lean α+β titanium alloys exhibiting high work-hardening by reorientation induced plasticity10.1016/j.msea.2023.145935 ↗
21. Reorientation induced plasticity (RIP) in high-strength titanium alloys: an insight into the underlying mechanisms and resulting mechanical properties10.1016/j.actamat.2023.118679 ↗
22. Deformation mechanism of bimodal microstructure in Ti-6Al-4V alloy: the effects of intercritical annealing temperature and constituent hardness10.1016/j.jmst.2020.08.057 ↗
23. Factors determining room temperature mechanical properties of bimodal microstructures in Ti-6Al-4V alloy10.1016/j.msea.2018.06.019 ↗
24. A strategy to improve the work-hardening behavior of Ti–6Al–4V parts produced by additive manufacturing10.1080/21663831.2016.1245681 ↗
25. Enhancing mechanical strength of Ti-6Al-4V sheet material by short-time sub-β-transus solution heat treatment and additional short-time annealing
26. Crystallography and reorientation mechanism upon deformation in the martensite of an α-α’ Ti-6Al-4V dual-phase microstructure exhibiting high work-hardening rate10.1016/j.actamat.2020.116530 ↗
27. Towards work-hardenability of Ti-6Al-4V through a quenching and partitioning approach10.1051/matecconf/202032111062 ↗
28. Energy- and material-efficient Ti-6Al-4V sheet part fabrication by the novel TISTRAQ-process, including resistance heating and tool-based quenching: insights into test stand design and material potential
29. Strengthening of Ti-6Al-4V alloy by short-time duplex heat treatment10.2320/matertrans.46.1681 ↗
30. Effects of short-time duplex heat treatment on microstructure and fatigue strength of Ti-6Al-4V alloy
31. Fopiano · 1968
32. Rapid thermokinetics driven nanoscale vanadium clustering within martensite laths in laser powder bed fused additively manufactured Ti6Al4V10.1080/21663831.2020.1772396 ↗
33. The role of lattice defects, element partitioning and intrinsic heat effects on the microstructure in selective laser melted Ti-6Al-4V10.1016/j.actamat.2019.01.039 ↗
34. Formation of a transition V-rich structure during the α’ to α + β phase transformation process in additively manufactured Ti-6Al-4V10.1016/j.actamat.2022.118104 ↗
35. Low temperature stress relief and martensitic decomposition in selective laser melting produced Ti6Al4V
36. Strength/ductility trade-off of laser powder bed fusion Ti-6Al-4V: synergetic effect of alpha-case formation and microstructure evolution upon heat treatments
37. Role of martensite decomposition in tensile properties of selective laser melted Ti-6Al-4V10.1016/j.jallcom.2018.02.111 ↗
38. Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition10.1016/j.actamat.2014.11.028 ↗
39. Effect of subtransus heat treatment on the microstructure and mechanical properties of additively manufactured Ti-6Al-4V alloy10.1016/j.jallcom.2017.11.263 ↗
40. Revealing the decomposition mechanisms of dislocations and metastable α’ phase and their effects on mechanical properties in a Ti-6Al-4V alloy10.1016/j.jmst.2021.07.048 ↗
41. Exploring the strength-ductility space of Ti-6Al-4V through a quenching and partitioning approach10.1016/j.msea.2025.147859 ↗
42. Übersicht über die Wärmebehandlung von TiAl6V4, HTM J. Heat Treatm
43. In situ site-specific specimen preparation for atom probe tomography10.1016/j.ultramic.2006.06.008 ↗
44. Review of atom probe FIB-based specimen preparation methods10.1017/S1431927607070845 ↗
45. The high energy materials science beamline at PETRA III
46. Storm · 2025
47. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
48. Correction of intensities for preferred orientation in powder diffractometry: application of the march model10.1107/S0021889886089458 ↗
49. Diffusion in the Ti-Al-V system10.1007/s11669-018-0673-9 ↗
50. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
51. The lattice parameters of high purity alpha titanium; and the effects of oxygen and nitrogen on them10.1007/BF03398899 ↗
52. 2007
53. Assessment of the structural relations between the bcc and omega phases of Ti, Zr, Hf and other transition metals10.1515/ijmr-2000-910110 ↗
54. Mechanism of stress relaxation and phase transformation in additively manufactured Ti-6Al-4V via in situ high temperature XRD and TEM analyses10.1016/j.actamat.2020.02.056 ↗
55. Martensite decomposition during rapid heating of Ti-6Al-4V studied via in situ synchrotron X-ray diffraction10.1038/s43246-024-00492-6 ↗
56. Martensite formation in titanium alloys: crystallographic and compositional effects10.1016/j.jallcom.2021.159636 ↗
57. The orthorhombic α″-phase in binary titanium-base alloys with d-metals of V–VIII groups, mater10.1016/j.msea.2006.02.086 ↗
58. Observations on the lattice parameters of the alpha solid solution in the titanium-aluminum system10.1007/BF03397677 ↗
59. First-principles calculations on the effect of interstitial oxygen on structural, thermodynamic, and elastic properties of titanium-oxygen alloys10.1016/j.commatsci.2024.113405 ↗
60. Phase transformations in the Ti-V system under high pressure up to 25 GPa10.1016/0001-6160(81)90071-7 ↗
61. The ti−v (Titanium-Vanadium) system10.1007/BF02873703 ↗
62. The morphology and substructure of Ti-Cu martensite10.1007/BF02643444 ↗
63. Unusual precipitation induced by solute segregation in coherent twin boundary in titanium alloys10.1016/j.actamat.2022.118466 ↗
64. Defects-dictated tensile properties of selective laser melted Ti-6Al-4V10.1016/j.matdes.2018.08.004 ↗
65. A layer model for the kinetics of segregation in planar defects in multi-component materials10.1016/j.actamat.2025.120948 ↗
66. The genesis of the cellular precipitation reaction10.1007/BF02652842 ↗
67. Influence of thermal treatment on element partitioning in α+β titanium alloy10.1016/j.jallcom.2019.03.332 ↗
68. Mechanical properties of fully martensite microstructure in Ti-6Al-4V alloy transformed from refined beta grains obtained by rapid heat treatment (RHT)10.1016/j.scriptamat.2017.05.038 ↗
69. Oxygen effects on the mechanical properties and lattice strain of Ti and Ti-6Al-4V10.1007/s12540-011-1006-2 ↗
70. Mechanism of trace oxygen promoting ductility in as-cast Ti-6Al-4V alloys10.1016/j.msea.2025.148176 ↗
71. The effects of the oxygen-enriched surface layer on mechanical properties of α+β type titanium alloys10.2355/isijinternational.45.133 ↗
72. Study on the mechanical properties gradient in surface oxygen diffusion hardened layer of Ti6Al4V alloy10.1016/j.jmrt.2022.04.028 ↗
73. Micromechanical behavior and thermal stability of a dual-phase α+α’ titanium alloy produced by additive manufacturing10.1016/j.actamat.2018.09.050 ↗