journal article·2026-05Open access

Thermal–microstructural–mechanical relationships in Fe-based tool steel coatings fabricated by laser directed energy deposition

Shiho Takemura, Yuichiro Miyata, Yoko Hirono, Yasuhiro Kakinuma

Abstract

Understanding the factors associated with hardness in laser directed energy deposition (L-DED) coatings is essential for controlling mechanical properties and reducing reliance on empirical parameter tuning. This study aims to clarify the mechanisms influencing the hardness of Fe-based tool steel coatings by sequentially analyzing microstructure and thermal history rather than direct parameter–property correlations. Coatings were fabricated under three process speeds to induce differences in the coating, and hardness distributions were examined. Microstructural features were characterized using electron backscatter diffraction (EBSD) to quantify BCC (martensite-dominant) phase fraction, grain size, and retained austenite distribution, while elemental dilution from the workpiece was analyzed by energy-dispersive X-ray spectroscopy (EDX). Thermal simulations were used to evaluate cooling rate, melt pool temperature, and melt pool morphology. Results show that hardness was correlated with BCC fraction and grain size. Elemental dilution from the workpiece was associated with increased retained austenite and reduced hardness. Additionally, spatial clustering of retained austenite, quantified by Moran’s I , further influenced hardness. Thermal analysis suggested that variations in melt pool temperature were more consistently associated with hardness than cooling rate alone, through their influence on dilution and cooling behavior in L-DED coating. Differences in melt pool morphology and overlap ratio were also associated with localized hardness reduction. By tracing the relationships from thermal history to microstructure to mechanical properties, this study provides a structured interpretation of hardness formation in L-DED coatings. The findings contribute to systematic process design and reducing dependency on trial-and-error in parameter selection. • Hardness in tool steel DED coatings analyzed via thermal–microstructural links. • BCC fraction, grain size, and retained austenite distribution are closely associated with hardness. • Moran’s I quantified the spatial clustering of retained austenite. • Melt pool temperature affects microstructural evolution in the coating. • Integrated analysis clarified process–structure–property relationships in DED.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. State of the art in directed energy deposition: from additive manufacturing to materials design10.3390/coatings9070418 ↗
2. Recent progress in remanufacturing technologies using metal additive manufacturing processes and surface treatment10.1007/s40684-023-00551-2 ↗
3. A comprehensive review on metal laser additive manufacturing in space: modeling and perspectives10.1016/j.actaastro.2024.06.027 ↗
4. Advances in metal additive manufacturing: a review of common processes, industrial applications, and Current challenges10.3390/app11031213 ↗
5. Metal additive manufacturing in aerospace: a review10.1016/j.matdes.2021.110008 ↗
6. Metal additive manufacturing in the commercial aviation industry: a review10.1016/j.jmsy.2019.08.005 ↗
7. Laser-based directed energy deposition (DED-LB) of advanced materials10.1016/j.msea.2022.142967 ↗
8. Impact of metal additive manufacturing parameters on the powder bed fusion and direct energy deposition processes: a comprehensive review10.1007/s40964-021-00180-8 ↗
9. The calculation of CCT diagrams for engineering steels
10. Design of advanced bainitic steels by optimisation of TTT diagrams and T0 curves10.2355/isijinternational.46.1479 ↗
11. Considerations in development of CCT diagrams for complex ferritic materials10.1179/1743284714Y.0000000626 ↗
12. Microstructure and mechanical properties of Laser additive manufactured H13 tool steel10.3390/met12020243 ↗
13. Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing10.1016/j.actamat.2016.03.019 ↗
14. Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing10.1016/j.jallcom.2015.01.256 ↗
15. Microstructural characterization of laser melting deposited Ti–5Al-5Mo–5V–1Cr–1Fe near β titanium alloy10.1016/j.jallcom.2013.03.243 ↗
16. Investigation on influence of thermal history on quality of workpiece created by directed energy deposition10.1016/j.cirp.2024.04.076 ↗
17. A thermal-mechanical finite element workflow for directed energy deposition additive manufacturing process modeling
18. Numerical simulation of heat and mass transfer in laser directed energy deposition10.1016/j.optlastec.2024.111024 ↗
19. Characterization of micro-scale gradient material properties to visualize the variations of stress-strain relationships with digital image correlation method10.1016/j.msea.2025.148636 ↗
20. Prediction of crystal nucleation and growth behavior of Fe/Ni-based multi-materials deposited by laser directed energy deposition using a multi-area, multi-layer, and multi-scale phase field calculation (M3-PFC)
21. Numerical modelling of heat transfer, mass transport and microstructure formation in a high deposition rate laser directed energy deposition process
22. Multi-track, multi-layer dendrite growth and solid phase transformation analysis during additive manufacturing of H13 tool steel using a combined hybrid cellular automata/phase field, solid-state phase prediction models10.1007/s00170-022-08901-1 ↗
23. Thermal analysis and microstructure evolution of TiC/Ti6Al4V functionally graded material by direct energy deposition10.1016/j.msea.2024.146136 ↗
24. Characterisation of heterogeneity and spatial autocorrelation in phase separating mixtures using Moran's I10.1016/j.jcis.2017.10.115 ↗
25. 2024
26. Emil · 1949
27. Characterization of tool surface properties generated by directed energy deposition and subsequent ball burnishing10.1115/1.4063736 ↗
28. An investigation of heat transfer and fluid flow on laser micro-welding upon the thin stainless steel sheet (SUS304) using computational fluid dynamics (CFD)10.1016/j.icheatmasstransfer.2016.05.008 ↗
29. Prediction of hardness and deformation using a 3-D thermal analysis in laser hardening of AISI H13 tool steel10.1016/j.applthermaleng.2017.04.156 ↗
30. Modeling the spray forming of H13 steel tooling10.1007/s11661-007-9159-9 ↗
31. Thermo-Physical modelling of track width during laser polishing of H13 tool steel10.1016/j.promfg.2017.07.026 ↗
32. 2008
33. LLC. 304 stainless steel
34. A parametric study of thermal and residual stress fields in lined pipe welding10.1016/j.tsep.2017.10.011 ↗
35. Normal spectral emissivity, specific heat capacity, and thermal conductivity of type 316 austenitic stainless steel containing up to 10 mass% B4C in a liquid state10.1016/j.jnucmat.2022.153865 ↗
36. An experimentally based thermo-kinetic hardening model for high power direct diode laser cladding10.1016/j.jmatprotec.2011.02.006 ↗
37. Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements10.1016/j.commatsci.2005.07.007 ↗
38. Thermophysical measurements on low carbon 304 stainless steel above 1400 K by a transient (subsecond) technique10.1007/BF00506274 ↗
39. Mechanical properties of the LMD-processed material Ferro55 in as-built and heat-treated conditions10.1016/j.procir.2022.08.055 ↗
40. Solidification and microstructure evolution in additively manufactured H13 steel via directed energy deposition: integrated experimental and computational approach10.1016/j.jmapro.2021.06.009 ↗
41. Excellent isotropic mechanical properties of electron beam melted H13 tool steel: process optimization and microstructural control10.1016/j.jmatprotec.2025.118980 ↗
42. Influence of refined hierarchical martensitic microstructures on yield strength and impact toughness of ultra-high strength stainless steel10.1016/j.jmst.2020.04.001 ↗
43. New insight into the relationship between grain boundaries and hardness in bainitic/martensitic steels from the crystallographic perspective10.1016/j.matlet.2021.131105 ↗
44. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
45. The Hall–Petch and inverse Hall–Petch relations and the hardness of nanocrystalline metals10.1007/s10853-019-04160-w ↗
46. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
47. New approaches for calculating Moran's index of spatial autocorrelation
48. Krauss · 2015
49. The relationship between alloying elements and retained austenite in martensitic stainless steel welds10.1016/S1359-6462(00)00339-0 ↗
50. The genesis of the Schaeffler diagram in the history of stainless steel10.1051/metal/2017059 ↗
51. Effect of block size on the strength of lath martensite in low carbon steels10.1016/j.msea.2005.12.048 ↗
52. Microstructure and cleavage in lath martensitic steels10.1088/1468-6996/14/1/014208 ↗
53. Prior austenite grain measurement: a direct comparison of EBSD reconstruction, thermal etching and chemical etching10.1016/j.matchar.2024.113656 ↗
54. Material product data sheet H13 hot work tool steel powder for additive
55. The effect of austenitising temperature on prior austenite grain size in a low-alloy steel10.1016/j.msea.2006.11.172 ↗
56. Austenitizing temperature and cooling rate effects on the martensitic transformation in a microalloyed-steel10.1590/1980-5373-mr-2019-0570 ↗