journal article·2026-04Open access

Improving the ductility of 2.6-GPa high-carbon martensitic steel by prior bainitic transformation

Sien Liu, Koyo Shimizu, Jiaqiang Dang, Karel Blanken, Fabien Briffod, Shoichi Nambu

Abstract

In this study, we designed a lean and time-efficient high-carbon bainite/martensite (B/M) steel with 2.64 GPa ultimate tensile strength and 9% uniform elongation. Prior lower bainite nucleated along prior austenite grain boundaries (PAGBs) suppressed premature intergranular fracture in martensitic constituent. Blocky retained austenite (RA) was observed adjacent to the bainite sheaves along PAGBs. During tensile deformation, significant work hardening behaviour was observed, primarily due to the transformation-induced-plasticity (TRIP) effect of blocky RA. A brittle-to-ductile transition was observed with increasing bainitic transformation time at the early stage. Overall, a low fraction of prior lower bainite can effectively enhance the ductility of the high-carbon martensite without sacrificing its ultrahigh strength. • Prior lower bainite along PAGB can enhance local deformability and suppress intergranular fracture. • Brittle-to-ductile transition attributes to the presence of lower bainite. • Design of a lean and time-efficient route to fabricate Bainite/martensite steels with 2.64 GPa ultimate tensile strengthens and 12% ductility.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Fusion materials and technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Ductile 2-GPa steels with hierarchical substructure10.1126/science.add7857 ↗
2. Gradient nanostructured steel with superior tensile plasticity10.1126/sciadv.add9780 ↗
3. Ductilization of 2.6-GPa alloys via short-range ordered interfaces and supranano precipitates10.1126/science.adr4917 ↗
4. A new 2.4 GPa extra-high strength steel with good ductility and high toughness designed by synergistic strengthening of nano-particles and high-density dislocations10.1016/j.scriptamat.2019.11.045 ↗
5. Super-strong dislocation-structured high-carbon martensite steel10.1038/s41598-017-06971-w ↗
6. A low-alloy high-carbon martensite steel with 2.6 GPa tensile strength and good ductility10.1016/j.actamat.2018.07.060 ↗
7. A medium-C martensite steel with 2.6 GPa tensile strength and large ductility10.1016/j.scriptamat.2023.115327 ↗
8. Brittle-to-ductile transition in martensite – bainite steel10.2355/isijinternational.ISIJINT-2020-757 ↗
9. Multiphase microstructure formation and its effect on fracture behavior of medium carbon high silicon high strength steel10.1016/j.jmst.2020.09.034 ↗
10. Influence of austenite grain boundary misorientation on hydrogen-induced intergranular crack propagation in a medium carbon martensitic steel10.1016/j.actamat.2024.120036 ↗
11. Crystallographic analysis on the lower bainite formation at the austenite grain boundary in Fe-0.6C-0.8Mn-1.8Si steel in the initial stage of transformation10.2355/isijinternational.ISIJINT-2023-155 ↗
12. Effect of bainite morphology on mechanical properties of the mixed bainite-martensite microstructure in D6AC steel10.1016/S1005-0302(12)60065-6 ↗
13. Influence of chronological control of transformation on the microstructure and mechanical properties of complex phase steels10.1016/j.scriptamat.2021.113892 ↗
14. Effect of austenisation temperature on bainite transformation below martensite starting temperature10.1080/02670836.2019.1631946 ↗
15. Very strong bainite10.1016/j.cossms.2004.09.005 ↗
16. Low temperature kinetics of bainite formation in high carbon steels10.1016/j.actamat.2013.01.044 ↗
17. Effect of prior martensite on bainite transformation and microstructure of high-carbon nano-bainitic steel10.1007/s42243-021-00591-5 ↗
18. Effect of prior martensite on bainite transformation in nanobainite steel10.1016/j.actamat.2014.11.029 ↗
19. Continuously cooled ultrafine bainitic steel with excellent strength–elongation combination10.1007/s11661-013-2173-1 ↗
20. Variant selection in grain boundary nucleation of bainite in Fe-2Mn-C alloys10.1016/j.actamat.2017.01.035 ↗
21. Effect of martensite pre-quenching on bainite transformation kinetics, martensite/bainite duplex microstructures, mechanical properties and retained austenite stability of GCr15 bearing steel10.1016/j.jmrt.2021.09.070 ↗
22. Formation of bainite below the MS temperature: kinetics and crystallography10.1016/j.actamat.2015.12.027 ↗
23. Toughness deterioration in advanced high strength bainitic steels10.1016/j.msea.2009.06.034 ↗
24. Unforeseen influence of the prior austenite grain size on the mechanical properties of a carbide-free bainitic steel10.1016/j.msea.2023.145388 ↗
25. Microstructural origins for quench cracking of a boron steel: boron distribution10.1016/j.matchar.2022.112022 ↗
26. The tempering behavior of martensite/austenite islands on the mechanical properties of a low alloy Mn-Ni-Mo steel with granular bainite
27. The role of grain-boundary cementite in bainite formation in high-carbon steels10.1016/j.scriptamat.2020.03.042 ↗
28. The unexpected low fracture toughness of dual-phase steels caused by ferrite/martensite interface decohesion10.1016/j.scriptamat.2024.116030 ↗
29. Towards ultra-high strength dual-phase steel with excellent damage tolerance: the effect of martensite volume fraction10.1016/j.ijplas.2023.103778 ↗
30. Effect of bain unit size on low-temperature fracture toughness in medium-carbon martensitic and bainitic steels10.2355/isijinternational.ISIJINT-2023-141 ↗
31. Nucleation theory for high-carbon bainite10.1016/j.msea.2003.10.355 ↗
32. Effect of Si on bainitic transformation kinetics in steels explained by carbon partitioning, carbide formation, dislocation densities, and thermodynamic conditions10.1016/j.matchar.2022.111774 ↗
33. Effect of Mn on the chemical driving force and bainite transformation kinetics in medium-manganese alloys10.1007/s10973-022-11664-2 ↗
34. Parent grain reconstruction from partially or fully transformed microstructures in MTEX10.1107/S1600576721011560 ↗
35. Influence of martensite/austenite interfaces on bainite formation in low-alloy steels below Ms10.1016/j.actamat.2020.02.003 ↗
36. Exploring the difference in bainite transformation with varying the prior austenite grain size in low carbon steel10.3390/met8120988 ↗
37. Exploring bainite formation kinetics distinguishing grain-boundary and autocatalytic nucleation in high and low-Si steels10.1016/j.actamat.2015.11.044 ↗
38. Chemical boundary engineering: a new route toward lean, ultrastrong yet ductile steels10.1126/sciadv.aay1430 ↗
39. Precipitate evolution and strengthening behavior during aging process in a 2.5 GPa grade maraging steel10.1016/j.actamat.2019.08.042 ↗
40. Achieving good ductility in 2.1 GPa grade maraging steel10.1016/j.msea.2023.145886 ↗
41. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗
42. A novel maraging stainless steel ultra-high-strengthened by multi-nanoprecipitations10.1016/j.scriptamat.2022.115224 ↗
43. Enhanced strength-ductility synergy in a new 2.2 GPa grade ultra-high strength stainless steel with balanced fracture toughness: elucidating the role of duplex aging treatment10.1016/j.jallcom.2022.167135 ↗
44. Enhanced mechanical properties of a high-carbon martensite steel processed by heavy warm rolling and tempering10.1016/j.msea.2023.144958 ↗
45. Effect of grain refinement on high-carbon martensite transformation and its mechanical properties10.1016/j.msea.2018.04.095 ↗
46. Ultrastrong and ductile additively-manufactured medium-carbon steel via modulating austenite stability10.1016/j.scriptamat.2023.115780 ↗
47. Application of a sparse mixed regression method to design the optimal composition and heat treatment conditions for transformation-induced plasticity steel with high strength and large elongation10.1016/j.scriptamat.2022.115028 ↗
48. Achieving 2.2 GPa ultra-high strength in low-alloy steel using a direct quenching and partitioning process10.3390/ma16247533 ↗
49. New insights into martensite strength and the damage behaviour of dual phase steels10.1016/j.actamat.2018.08.010 ↗
50. Effect of Ni addition on bainite transformation and properties in a 2000 MPa grade ultrahigh strength bainitic steel10.1007/s12540-018-0139-y ↗
51. Nanostructured bainite10.1098/rspa.2009.0407 ↗
52. Effects of austempering on the microstructure and mechanical properties of high-strength nanostructured bainitic steel containing 3.5 wt% aluminum10.1016/j.jmrt.2024.01.054 ↗
53. Structure-property relationship in a 2 GPa grade micro-alloyed ultrahigh strength steel10.1016/j.jallcom.2017.02.164 ↗
54. An ultra-high strength bainitic aging steel10.1016/j.scriptamat.2024.116061 ↗
55. A heterostructured bainitic steel produced by two-step austempering and low-temperature ausforming10.1016/j.scriptamat.2023.115943 ↗
56. Achieving unprecedented yield strength of 2.2 GPa with high ductility in formed parts using strain-aging10.1016/j.scriptamat.2023.115521 ↗
57. High dislocation density–induced large ductility in deformed and partitioned steels10.1126/science.aan0177 ↗
58. Nanosized austenite and coherent nanoprecipitates making maraging steel strong and ductile10.1016/j.msea.2024.146605 ↗
59. Effect of carbon distribution range in mixed bainite/martensite/retained austenite microstructure on mechanical properties10.1016/j.jmrt.2021.12.121 ↗
60. Deformation-induced martensitic transformation behavior of retained austenite during rolling contact in carburized SAE4320 steel10.2355/isijinternational.ISIJINT-2021-107 ↗
61. Crystallographic and microstructural studies of lath martensitic steel during tensile deformation10.1007/s11661-014-2461-4 ↗
62. Deformation-induced grain rotation and grain boundary formation achieved through dislocation-disclination reactions in polycrystalline hexagonal close-packed metals10.1016/j.actamat.2023.118855 ↗
63. Strain localization behavior in low-carbon martensitic steel during tensile deformation10.1016/j.scriptamat.2013.08.030 ↗
64. Understanding martensite and twin formation in austenitic steels: a model describing TRIP and TWIP effects10.1016/j.actamat.2017.02.004 ↗
65. On variant selection at the prior austenite grain boundaries in lath martensite and relevant micro-mechanical implications10.1016/j.msea.2018.06.090 ↗
66. Influence of phosphorus content and quenching/tempering temperatures on fracture toughness and fatigue life of SAE 5160 steel10.1590/S1516-14392010000400005 ↗
67. Isothermal bainite transformation in low-alloy steels: mechanism of transformation10.1016/j.actamat.2020.10.048 ↗
68. Effect of prior austenite grain size on the evolution of microstructure and mechanical properties of an intercritically annealed medium manganese steel10.1016/j.msea.2019.138458 ↗