Microstructure and properties of multiscale and multiphase ceramic particles reinforced Cu-Cr-Zr alloy prepared by turbulence shock homogeneous casting with B4C
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (97)
Show source-provided references
1. Analysis of phase in Cu–15%Cr–0.24%Zr alloy10.1016/S1003-6326(13)62602-3 ↗
2. Enhanced electrical conductivity and mechanical properties in thermally stable fine-grained copper wire
3. Microstructure and properties of Cu-Cr-Zr alloy with columnar crystal structure processed by upward continuous casting10.1016/j.jallcom.2021.161700 ↗
4. Mechanism of interaction between the Cu/Cr interface and its chemical mixing on tensile strength and electrical conductivity of a Cu-Cr-Zr alloy10.1016/j.matdes.2019.107976 ↗
5. Microstructure and properties of fine grained Cu-Cr-Zr alloys after termo-mechanical treatments10.1515/rams-2018-0020 ↗
6. Solute clusters and chemistry in a Cu–Cr–Zr–Mg alloy during the early stage of aging10.1016/j.matlet.2013.10.055 ↗
7. Microstructure and properties of as-cast Cu-Cr-Zr alloys with lanthanum addition10.1016/j.jre.2017.11.006 ↗
8. Effects of minor rare earths on the microstructure and properties of Cu-Cr-Zr alloy10.1016/j.jallcom.2020.155762 ↗
9. Effect of equal channel angular pressing on microstructure evolution and properties variations of a CuCrZrY alloy10.1016/j.jallcom.2021.162284 ↗
10. Influence of alloying elements and composition on microstructure and mechanical properties of Cu-Si, Cu-Ag, Cu-Ti, and Cu-Zr alloys
11. Effects of multiple trace alloying elements on the microstructure and properties of Cu-4 wt%ti alloys10.1016/j.msea.2017.09.072 ↗
12. Dynamic self-organization in Cu alloys under ion irradiation10.1016/j.actamat.2010.03.039 ↗
13. Microstructural stability of nanostructured Cu–Nb–W alloys during high-temperature annealing and irradiation10.1016/j.actamat.2011.05.009 ↗
14. Grain refinement and mechanical properties of Cu–Cr–Zr alloys with different nano-sized TiCp addition10.3390/ma10080919 ↗
15. Fabrication and mechanical properties of WC nanoparticle dispersion-strengthened copper10.1016/j.msea.2021.141274 ↗
16. Effect of in situ reaction conditions on the microstructure changes of Cu–TiB2 alloys by combining in situ reaction and rapid solidification10.1016/j.matchemphys.2011.10.019 ↗
17. Microstructure and mechanical properties of Cu matrix composites reinforced by TiB2/TiN ceramic reinforcements10.1007/s40195-020-01100-5 ↗
18. Effect of La addition on the particle characteristics, mechanical and electrical properties of in situ Cu-TiB2 composites10.1016/j.jallcom.2016.06.129 ↗
19. High strength and high electrical conductivity Cu composites reinforced by SiO2 aerogel particles10.1016/j.jmrt.2023.03.153 ↗
20. Enhanced combination of strength and electrical conductivity properties with CrB2 reinforced Cu matrix composites fabricated by powder metallurgy
21. Preparation of Cu/CrB2 composites with well-balanced mechanical properties and electrical conductivity by ex-situ powder metallurgy10.1016/j.jmrt.2022.01.112 ↗
22. Effect of ZrB2 content on the properties of copper matrix composite10.3390/ma17246105 ↗
23. Consolidation of dispersion strengthened copper–niobium carbide composite prepared by in situ and ex situ methods10.1016/j.msea.2008.10.038 ↗
24. Effect of Ag micro-alloying on the microstructure and properties of Cu-14Fe in situ composite10.1016/j.msea.2010.04.051 ↗
25. In-situ formation of copper matrix composites by laser sintering10.1016/S0921-5093(02)00050-3 ↗
26. Study on the fabrication of Al matrix composites strengthened by combined in-situ alumina particle and in-situ alloying elements10.1016/S0921-5093(02)00025-4 ↗
27. Internal oxidation of dilute Cu-Al alloy powers with oxidant of Cu2O10.1016/j.msea.2004.03.042 ↗
28. Preparation of Cu-Al2O3 bulk nano-composites by combining Cu-Al alloy sheets internal oxidation with hot extrusion10.1016/j.jallcom.2015.02.057 ↗
29. Extending the upper limit of volumetric fraction of oxides in ODS-Cu fabricated with internal oxidation via element doping10.1016/j.jallcom.2024.175600 ↗
30. Microstructure and properties of Y2O3/Cu composites fabricated by a novel liquid phase in situ reactive synthesis process10.1016/j.ceramint.2022.06.202 ↗
31. In situ production of tantalum carbide nanodispersoids in a copper matrix by reactive milling and hot extrusion10.1016/j.jallcom.2014.01.191 ↗
32. D. Lee, B. Kim. Nanostructured Cu-Al2O3 composite produced by thermochemical process for electrode application. Mater. Lett. 58(20043) 378-383.10.1016/S0167-577X(03)00505-6 ↗
33. Preparation and properties of Al2O3 nanoparticle reinforced copper matrix composites by in situ processing10.1016/j.matdes.2008.10.005 ↗
34. Cast in situ Cu-TiC composites: synthesis by SHS route and characterization10.1016/j.msea.2008.10.002 ↗
35. In situ synthesis of TiC reinforced metal matrix composite (MMC) coating by self propagating high temperature synthesis (SHS)10.1016/j.jallcom.2011.04.150 ↗
36. Carbide stoichiometry in TiCx and Cu-TiCx produced by self-propagating high-temperature synthesis10.1016/S1359-6462(01)01205-2 ↗
37. In-situ spherical TiB2/Cu composite powder: a new method of liquid phase reaction coupled with gas atomization10.1016/j.matchar.2022.112096 ↗
38. Microstructure, properties and reaction kinetics of a Cu-Al2O3-TiB2 alloy prepared by a new liquid phase in-situ reaction technology10.1016/j.jmrt.2023.08.156 ↗
39. Microstructure, properties and strengthening mechanism of Cu-TiB2-Al2O3 composite prepared by liquid phase in-situ reaction casting10.1016/j.jallcom.2022.165170 ↗
40. G. Li, J. Sun, Q. Guo, R. Wang. Fabrication of the nanometer Al2O3/Cu composite by internal oxidation. J. Mater. Process. Technol. 170(20051) 336-340.10.1016/j.jmatprotec.2005.05.011 ↗
41. Effect of NaCl on the synthesis of TiB2 powder by a self-propagating high-temperature synthesis technique10.1016/j.matlet.2003.06.003 ↗
42. Relationship between microstructure, properties and reaction conditions for Cu-TiB2 alloys prepared by in situ reaction10.1016/j.actamat.2009.06.030 ↗
43. Thermodynamic assessments of the Cu-B and Cu-Tm systems10.1016/j.jallcom.2009.03.101 ↗
44. In situ formation of superhard Cu-B based composite by reducing reaction10.1016/j.jallcom.2012.02.168 ↗
45. Investigation of the matrix and interface of Cu-B/diamond composite by atom probe tomography10.1016/j.ceramint.2024.01.198 ↗
46. Effect of boron on aging strengthened phase and properties of Cu-Cr-Zr alloy10.1016/j.jmrt.2022.05.090 ↗
47. Effect of in situ synthesized TiB2 on the reaction between B4C and Al in a vacuum infiltrated B4C-TiB2-Al composite10.1007/s10853-009-3466-z ↗
48. Effect of the Ti/B4C mole ratio on the reaction products and reaction mechanism in an Al-Ti-B4C powder mixture10.1016/j.matchemphys.2014.06.039 ↗
49. Effects of B4C particles on Al-TiO2 reaction in Al matrix composite10.1016/j.jnucmat.2025.155776 ↗
50. Effects of Zr element on the microstructure and mechanical properties of B4C/Al composites fabricated by melt stirring method10.1016/j.compositesb.2021.109156 ↗
51. In-situ construction of Cu/Cr3C2(ZrC)/C heterogeneous interfaces in high thermal conductivity Cu/carbon fibers composites via turbulence-shock homogeneous casting10.1016/j.carbon.2025.120654 ↗
52. Comparison of microstructural and mechanical properties of Al-TiC, Al-B4C and Al-TiC-B4C composites prepared by casting techniques10.1016/j.msea.2012.09.068 ↗
53. Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites: a comparative study10.1016/S0924-0136(03)00815-X ↗
54. On the impact toughness of Al-15 vol.%B4C metal matrix composites10.1016/j.compositesb.2015.04.018 ↗
55. Core-shell structure nanoprecipitates in Fe-xCu-3.0Mn-1.5Ni-1.5Al alloys: aphase field study10.1016/j.pnsc.2022.04.001 ↗
56. Reaction synthesis of TiC–TiB2/Al composites from an Al–Ti–B4C system10.1007/s10853-007-2078-8 ↗
57. Effect of Ti content and stirring time on microstructure and mechanical behavior of Al-B4C composites10.1016/j.jallcom.2016.05.135 ↗
58. Influence analysis of B4C content on the neutron shielding performance of B4C/Al10.1016/j.radphyschem.2022.110684 ↗
59. Influence of B4C content and particle size on the mechanical properties of Al2O3‐B4C composites10.1111/ijac.15067 ↗
60. Influence of B4C on the tribological and mechanical properties of Al 7075-B4C composites10.1016/j.compositesb.2013.05.012 ↗
61. Twinning and stacking fault-induced precipitation in an aluminum alloy10.1016/j.jmrt.2024.12.223 ↗
62. Physical metallurgy-guided machine learning and artificial intelligent design of ultrahigh-strength stainless steel10.1016/j.actamat.2019.08.033 ↗
63. Advances in additive manufacturing of cemented carbides: from powder production to mechanical properties and future challenges10.1016/j.cossms.2025.101238 ↗
64. Deformation microstructures, strengthening mechanisms, and electrical conductivity in a Cu-Cr-Zr alloy10.1016/j.msea.2015.01.065 ↗
65. Effect of cryogenic rolling and multistage thermo-mechanical treatment on the microstructure and properties of the Cu-0.4Cr-0.39Zn-0.1Mg-0.07Zr alloy10.1016/j.matchar.2023.113557 ↗
66. Effect of direct current pulses on mechanical and electrical properties of aged Cu-Cr-Zr alloys10.1016/j.matdes.2015.12.013 ↗
67. Effect of rolling and aging processes on microstructure and properties of Cu-Cr-Zr alloy10.1016/j.msea.2017.05.114 ↗
68. Enhanced combination of mechanical properties and electrical conductivity of a hard state Cu-Cr-Zr alloy via one-step friction stir processing10.1016/j.jmatprotec.2020.116880 ↗
69. Microstructure and properties of Cu-Zn-Cr-Zr alloy treated by multistage thermo-mechanical treatment10.1016/j.msea.2023.144679 ↗
70. Significantly enhanced high-temperature mechanical properties of Cu-Cr-Zn-Zr-Si alloy with stable second phases and grain boundaries10.1016/j.matdes.2023.112292 ↗
71. Study of deformation and aging behaviors of a hot rolled-quenched Cu-Cr-Zr-Mg-Si alloy during thermomechanical treatments10.1016/j.matdes.2012.03.003 ↗
72. A promising structure for fabricating high strength and high electrical conductivity copper alloys
73. A high strength and high electrical conductivity CuCrZr alloy prepared by aging and subsequent cryorolling10.1016/j.vacuum.2021.110315 ↗
74. Synergistic effects of trace silicon, calcium and cerium on the microstructure and properties of a novel Cu-Cr-Nb-Si-Ca-Ce alloy10.1016/j.msea.2024.146419 ↗
75. The design of oxidation resistant Ni superalloys for additive manufacturing
76. Effects of Y and Hf addition on soft magnetic property and ductility improvement of Fe–6.9 wt% Si alloy10.1016/j.jmrt.2025.06.098 ↗
77. High Heat-fade resistance, metal-free resin-based brake pads: a step towards replacing copper by using andalusite10.1186/s10033-025-01310-x ↗
78. Interaction of nanostructured Lu2Si2O7/Lu2SiO5 double-ceramic layer environmental barrier coatings with CMAS10.1016/j.surfcoat.2025.131994 ↗
79. Comparison of surface integrity, microstructure and corrosion resistance of Zr-4 alloy with various laser shock peening treatments10.1016/j.surfcoat.2025.131799 ↗
80. X. Jiang, W. Yu, Y. Wei. Tailoring precipitation-strengthening in Ir-based ternary alloys: a first-principles approach to L12 phase engineering. Rare Met. 44(11) 9036-9052.10.1007/s12598-025-03543-0 ↗
81. Additive manufacturing of cryogenic chemically complex alloys with sponge bone-like reticular nanoscale superstructure10.1016/j.compositesb.2025.112786 ↗
82. Passivation, layered surface high-temperature oxidation, and mechanical behaviors in Al-doped cobalt-based dual-phase multi-principal element alloys10.1016/j.apsusc.2025.164930 ↗
83. Investigation of process and properties of cu-mn-al alloy cladding deposited on 27SiMn steel via cold metal transfer
84. Effect of the activator B(OCH3)3 on the microstructure and mechanical properties of Cu-Mn-Al alloy coating via CMT cadding
85. Achieving serrated grain boundaries within gradient microstructures of nickel-based superalloys for dual-property turbine disks in aeroengines10.1016/j.cja.2025.103910 ↗
86. Microstructure and corrosion behavior of Al-Cu intermetallics in laminated sheets10.1016/j.intermet.2025.109022 ↗
87. Investigation on the atomization mechanism of alloy powder by dual-gas nozzle and the powder defects formation10.1016/j.powtec.2025.121768 ↗
88. Effect of chemical composition and heat treatment on the microstructure and performance of Ag-based alloy wires10.1016/j.matdes.2025.114728 ↗
89. Effect of temperature on mechanical behavior of Cu-Cr-Co-Ti alloys10.1016/j.matchar.2023.112904 ↗
90. The evolution of microstructure and properties of a Cu-Ti-CrMg-Si alloy with high strength during the multi-stage thermomechanical treatment10.1016/j.msea.2020.140510 ↗
91. Effect of Cr and Sn additions on microstructure, mechanical-electrical properties and softening resistance of Cu-Cr-Sn alloy10.1016/j.msea.2020.140628 ↗
92. Strength improvement of CoCrNi medium-entropy alloy through introducing lattice defects in refined grains10.1016/j.matchar.2022.112254 ↗
93. Effects of Si addition on mechanical, electrical and magnetic property of Cu-10Fe alloy
94. Customized development of promising Cu-Cr-Ni-Co-Si alloys enabled by integrated machine learning and characterization10.1016/j.actamat.2022.118484 ↗
95. Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: a model for predicting their yield strength10.1016/j.scriptamat.2005.12.017 ↗
96. Effect of dual-scale FeCrSi phase on the strength and conductivity of Cu-2.5Fe-0.3Cr-0.2Si alloy10.1016/j.msea.2022.144340 ↗
97. Hall-petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗