Mitigating the challenges in additive manufacturing of refractory complex concentrated alloys using Ti alloying via multi-material feedstock approach
Source abstract
Abstract
The development of novel refractory complex concentrated alloy material systems for extreme environments, despite the promise, is hindered by significant processing challenges during fabrication. These challenges primarily stem from their intrinsic properties: high hardness and brittle nature restrict deposition through impact-based approaches such as cold spray additive manufacturing (CSAM), while the wide variation in melting temperatures among constituent elements limits the processability by melting and solidification - based additive manufacturing techniques such as laser-based powder bed fusion (LB-PBF). In this study, a composite feedstock approach was employed to mitigate the aforementioned-challenges during CSAM and LB-PBF processing. Commercially pure Ti was employed as the secondary material and was mixed with a custom-developed TaNbTiVCr alloy at varying volumetric ratios. The CSAM and LB-PBF printed specimens were systematically characterized in terms of their microstructure and microhardness. CSAM and LB-PBF printed specimens with different volume fractions of mixing demonstrated excellent build quality, with negligible porosity and crack formations, albeit with inhomogeneous microstructures. In the case of CSAM, the specimen with highest TaNbTiVCr content retained comparable hardness to that of the feedstock powder, despite Ti addition. The Ti particles offered a cushioning effect to the impacting TaNbTiVCr particles, thereby limiting the inter-particle interaction between them, aiding the deposit build-up. On the other hand, Ti addition for the LB-PBF processing played a critical role in inhibiting the formation of hot-cracks and lack-of-fusion porosities. However, this was at an expense of lower hardness compared to the CSAM counterparts. Overall, this systematic study highlights the potential of employing a composite feedstock approach to significantly enhance the processability of the complex refractory alloys through additive manufacturing.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
2. A review on high-temperature applicability: a milestone for high entropy alloys engineering science and technology, an international journal
3. High entropy alloy synthesis, characterisation, manufacturing & potential applications: a review10.1080/10426914.2021.2006223 ↗
4. Development and exploration of refractory high entropy alloys - a review10.1557/jmr.2018.153 ↗
5. Thermal spray high-entropy alloy coatings: a review10.1007/s11666-020-01047-0 ↗
6. Advancements in deposition of high entropy alloys using cold spray technology10.1007/s11666-024-01879-0 ↗
7. Additive manufacturing of high entropy alloys: a practical review10.1016/j.jmst.2020.11.029 ↗
8. “Review and perspective on additive manufacturing of refractory high entropy alloys”
9. Analysis of laser-induced microcracking in tungsten under additive manufacturing conditions: experiment and simulation10.1016/j.actamat.2020.04.060 ↗
10. Additive manufacturing of pure tungsten by means of selective laser beam melting with substrate preheating temperatures up to 1000 ∘ C10.1016/j.nme.2019.02.034 ↗
11. Elucidating the challenges in the development and deployment of refractory complex concentrated alloys for additive manufacturing
12. A review of advanced composite and nanostructured coatings by solid-state cold spraying process10.1080/10408436.2017.1410778 ↗
13. Current trends and future perspective for cold spray metal-ceramic composites10.1002/adem.202401657 ↗
14. Evaluating the application of cold spray technology for the deposition of copper–graphene composite coatings10.3390/coatings15020153 ↗
15. Microstructure and tribological properties of Al2O3 reinforced FeCoNiCrMn high entropy alloy composite coatings by cold spray10.1016/j.surfcoat.2022.128205 ↗
16. Modification of cold-sprayed high-entropy alloy particles reinforced aluminum matrix composites via friction stir processing10.1016/j.jallcom.2022.164426 ↗
17. Microstructure and mechanical properties of cold spray additive manufactured and post heat treated high-entropy alloys with mixed CoCrFeNi and Ti powders10.1016/j.jmrt.2023.10.274 ↗
18. Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting10.1016/j.actamat.2014.01.018 ↗
19. Remelt processing and microstructure of selective laser melted Ti25Ta10.1016/j.jallcom.2019.153082 ↗
20. Low-cycle fatigue performance of remelted laser powder bed fusion (L-PBF) biomedical Ti25Ta10.1016/j.msea.2020.140228 ↗
21. Predicting the chemical homogeneity in laser powder bed fusion (LPBF) of mixed powders after remelting
22. Corrosion behavior and mechanism of selective laser melted Ti35Nb alloy produced using pre-alloyed and mixed powder in Hank's solution10.1016/j.corsci.2021.109609 ↗
23. Selective laser melting of Ti–35Nb composite from elemental powder mixture: microstructure, mechanical behavior and corrosion behavior10.1016/j.msea.2019.06.001 ↗
24. In situ alloy formation of a wmotanbv refractory metal high entropy alloy by laser powder bed fusion (Pbf-lb/m)10.3390/ma14113095 ↗
25. Enhancing the strength and plasticity of laser powder bed fused NbMoTaW refractory high-entropy alloy via Ti alloying10.1016/j.jallcom.2024.175043 ↗
26. Effect of Ti additions on mechanical properties of NbMoTaW and VNbMoTaW refractory high entropy alloys10.1016/j.intermet.2017.01.007 ↗
27. Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: characterization and thermodynamic modeling10.1016/j.actamat.2016.02.019 ↗
28. Development and characterization of Ti-6Al-4V to 304L stainless steel gradient components fabricated with laser deposition additive manufacturing10.1016/j.matdes.2016.05.016 ↗
29. Stainless steel to titanium bimetallic structure using LENSTM
30. Particle flattening during cold spray: mechanistic regimes revealed by single particle impact tests10.1016/j.surfcoat.2020.126386 ↗
31. Review of relationship between particle deformation, coating microstructure, and properties in high-pressure cold spray10.1007/s11666-017-0575-0 ↗
32. Study of the influence of particle velocity on adhesive strength of cold spray deposits10.1007/s11666-011-9707-0 ↗
33. Microstructure and mechanical properties of Ti cold-spray splats determined by electron channeling contrast imaging and nanoindentation mapping10.1017/S1431927615000240 ↗
34. Evaluation of parameters for assessment of inter-splat bond strength in cold-sprayed coatings10.1007/s11666-010-9527-7 ↗
35. Solid-state cold spraying of Ti and its alloys: a literature review10.1016/j.pmatsci.2019.100633 ↗
36. Wong · 2010 · 89 · 639
37. Influence of helium and nitrogen gases on the properties of cold gas dynamic sprayed pure titanium coatings10.1007/s11666-010-9568-y ↗
38. Cyclic behavior of FeCoCrNiMn high entropy alloy coatings produced through cold spray10.1016/j.jallcom.2022.167550 ↗
39. Additive manufacturing of multi-materials with interfacial component gradient by in-situ powder mixing and laser powder bed fusion10.1016/j.jallcom.2024.173508 ↗
40. On the mechanism of liquid copper penetration into iron grain boundaries10.1034/j.1600-0692.2001.d01-36.x ↗
41. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
42. Effect of heat treatment on microstructural evolution and hardness homogeneity in laser powder bed fusion of alloy 718
43. In-situ formation of Ni-Al intermetallics-coated graphite/Al composite in a cold-sprayed coating and its high temperature tribological behaviors10.1016/j.jmst.2017.01.026 ↗
44. The effect of process parameters on residual stress evolution and distortion in the laser powder bed fusion of Ti-6Al-4V
45. A new hot-tearing criterion
46. Mechanical properties in the semi-solid state and hot tearing of aluminium alloys10.1016/S0079-6425(03)00037-9 ↗
47. Numerical modelling of in-situ alloying of Al and Cu using the laser powder bed fusion process: a study on the effect of energy density and remelting on deposited track homogeneity
48. Laser powder bed fusion and heat treatment of an AlCrFe2Ni2 high entropy alloy10.3389/fmats.2020.00248 ↗
49. Guo S and Liu C T Phase Stability in High Entropy Alloys: Formation of solid-solution Phase or Amorphous Phase].
50. Influence of Al and Ti alloying and annealing on the microstructure and compressive properties of cr-fe-ni multi-principal element alloy10.3390/met14111223 ↗
51. Effect of homogenization annealing on microstructure and mechanical properties of AlMo0.5NbTa0.5TiZr refractory high entropy alloy manufactured by laser metal deposition10.1016/j.matchar.2025.115119 ↗
52. Thermo-Calc & DICTRA
53. On parameter selection in cold spraying10.1007/s11666-011-9662-9 ↗
54. Effect of coating thickness on microstructure, mechanical properties and fracture behaviour of cold sprayed Ti6Al4V coatings on Ti6Al4V substrates10.1016/j.surfcoat.2018.05.060 ↗
55. Van Steenkiste · 2002 · 154
56. How increasing cold spray coatings thickness affects their residual stress and properties10.1016/j.surfcoat.2024.130867 ↗