journal article·2026-02Open access

Microstructural tailoring to promote Portevin-Le Chatelier effect in laser powder bed fusion fabricated AlMgScZr alloy

Ali Rezaei, Mohsen K. Keshavarz, Sagar Patel, Kevin Slattery, John Barnes, Mihaela Vlasea

Abstract

The microstructure of an AlMgScZr alloy was successfully tailored via laser powder bed fusion (LPBF). Employing keyhole melting mode resulted in the occurrence of mixed type A+B Portevin-Le Chatelier (PLC) effect with a substantial threefold increase in ductility and a modest enhancement in tensile strength. The underlying mechanism was ascribed to the balanced microstructure of the keyhole samples with a finer grain size, shorter Burgers vector, and less microstrain, which facilitates continuous deformation via PLC. This study offers new insights into property design during LPBF.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Remelting-based microstructure engineering in laser powder bed fusion: a case study in 316L stainless steel10.1016/j.scriptamat.2024.116469 ↗
2. New insights into the character of austenite-ferrite boundaries in an additively manufactured duplex stainless steel10.1016/j.scriptamat.2024.116049 ↗
3. Microstructure tailoring in laser powder bed fusion (L-PBF): strategies, challenges, and future outlooks10.1016/j.jallcom.2023.172564 ↗
4. Additive manufacturing of alloys with programmable microstructure and properties10.1038/s41467-023-42326-y ↗
5. Deformation and fatigue behaviour of additively manufactured Scalmalloy® with bimodal microstructure10.1016/j.ijfatigue.2023.107592 ↗
6. Columnar to equiaxed transition in Al-Mg(-Sc)-Zr alloys produced by selective laser melting10.1016/j.scriptamat.2017.10.021 ↗
7. A review of laser powder bed fusion additive manufacturing of aluminium alloys: microstructure and properties
8. Development of fully equiaxed microstructure in Scalmalloy® through powder bed fusion using a ring-mode laser beam10.1016/j.scriptamat.2023.115680 ↗
9. Alloy design strategy for microstructural-tailored scandium-modified aluminium alloys for additive manufacturing10.1016/j.scriptamat.2021.114277 ↗
10. Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting10.1016/j.matdes.2016.11.040 ↗
11. Fatigue properties of Scalmalloy® processed by laser powder bed fusion in as-built, chemically and conventionally machined surface condition10.1016/j.jmatprotec.2022.117811 ↗
12. Microstructure evolution and mechanical property response of 3D-Printed scalmalloy with different heat-treatment times at 325 °C10.3390/met11040555 ↗
13. Melting modes in laser powder bed fusion
14. The influence of beam focus during laser powder bed fusion of a high reflectivity aluminium alloy — AlSi10Mg
15. Melting mode-driven processing diagram for nanoparticle-enhanced high-strength aluminum alloy processed by laser powder bed fusion10.1016/j.matdes.2025.113794 ↗
16. Three types of Portevin–Le Chatelier effects: experiment and modelling10.1016/j.actamat.2006.10.029 ↗
17. Quantitative assessment of the influence of the Portevin-Le Chatelier effect on the flow stress in precipitation hardening AlMgScZr alloys10.1016/j.actamat.2023.119060 ↗
18. On the effects of the Mg content on the critical strain for the jerky flow of Al–Mg alloys10.1016/j.msea.2015.02.055 ↗
19. Extending the mechanical property regime of laser powder bed fusion Sc- and Zr-modified Al6061 alloy by manipulating process parameters and heat treatment
20. Dynamic strain aging studied at the atomic scale10.1016/j.actamat.2014.12.028 ↗
21. Impact of dispersoids' distribution on portevin-le-chatelier effect and surface quality in Al–Mg-Sc-Zr alloys10.1016/j.msea.2023.145108 ↗
22. A critical review on the Portevin-Le Chatelier effect in aluminum alloys10.1007/s11771-022-4977-x ↗
23. Serration and noise behaviors in materials10.1016/j.pmatsci.2017.06.004 ↗
24. Spatio-temporal dynamics of the Portevin–Le Chatelier effect: experiment and modelling10.1016/S1359-6454(00)00067-7 ↗
25. Implication of grain-boundary structure and chemistry on plasticity and failure10.1557/s43577-022-00378-3 ↗
26. Low-angle grain boundary migration in the presence of extrinsic dislocations10.1016/j.actamat.2009.07.003 ↗
27. Effect of grain refinement on jerky flow in an al-mg-sc alloy10.1007/s11661-016-3381-2 ↗
28. Huda · 2022
29. Metal vaporization and its influence during laser powder bed fusion process10.1016/j.matdes.2022.110505 ↗
30. Effects of high Mg content and processing parameters on Portevin-Le Chatelier and negative strain rate sensitivity effects in Al–Mg alloys10.1016/j.msea.2020.139151 ↗
31. Effect of Mg on microstructure and mechanical properties of Al-Mg alloys produced by high pressure torsion10.1016/j.scriptamat.2018.09.033 ↗
32. Effects of nanosized precipitates on the Portevin-Le Chatelier behavior: model prediction and experimental verification
33. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
34. Delineating dislocation structures and residual stresses in additively manufactured alloys10.1016/j.actamat.2023.119413 ↗
35. High strength and ductility of additively manufactured 316L stainless steel explained10.1007/s11661-018-4607-2 ↗
36. A model for the Portevin-Le Chatelier effect in substitutional alloys10.1016/0001-6160(72)90028-4 ↗
37. Collective dislocation behaviour in dilute alloys and the Portevin—Le chatelier effect10.1515/JMBM.1989.2.3-4.255 ↗