Plasma wire arc additive manufacturing (PWAAM) of high-strength steel on a high-carbon steel, consideration and characterization of the transition area
Source abstract
Abstract
In hybrid metal structures where high-strength steel (10NiMnMoCr8-7-6) is added onto a high-carbon (C55E) steel substrate using plasma wire arc additive manufacturing (PWAAM), the transition area remains critical due to the complex interactions between the alloys and their thermal histories. This study uses a combination of high-resolution characterization methods to investigate the local mechanical properties and microstructural gradients in the unaffected substrate, the heat-affected zone (HAZ), the dilution zone (DZ), and the all-weld metal (AWM). Carbon content and microstructure were systematically characterized and linked to the respective microstructural zones of the transition area to evaluate the differences in microstructure and mechanical properties. In addition to micro-tensile tests and hardness measurements, nanoindentation and indentation plastometry-based imprint testing (IPIT) were applied to capture local mechanical properties at a high resolution across the transition area. The different carbon content in combination with the altering thermal history establishes a complex microstructure gradient, correlating with local mechanical properties — a relationship that was clearly revealed by the combined characterization methods.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Erosion and Abrasive Machining
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Konstruktive Randbedingungen bei Anwendung des WAAM-Verfahrens
2. A review of WAAM for steel construction – manufacturing, material and geometric properties, design, and future directions10.1016/j.istruc.2022.08.084 ↗
3. Prospects of producing aluminum parts by wire arc additive manufacturing (WAAM)10.1016/j.matpr.2022.02.137 ↗
4. A review of challenges for wire and arc additive manufacturing (WAAM)10.1007/s12666-022-02823-y ↗
5. Wire arc additive manufacturing: a comprehensive review and research directions10.1007/s11665-021-05871-5 ↗
6. A review on process planning strategies and challenges of WAAM10.1016/j.matpr.2021.02.632 ↗
7. Heat control and design-related effects on the properties and welding stresses in WAAM components of high-strength structural steels10.1007/s40194-022-01450-x ↗
8. Experimental investigations on mechanical properties of multi-layered structure fabricated by GMAW-based WAAM of SS316L10.1016/j.jmrt.2022.08.074 ↗
9. Investigating the effect of path planning strategies on 3D metallic structure deposited using robotic WAAM10.1016/j.matchemphys.2024.129909 ↗
10. Influence of variation of energy per unit length on mechanical-technological properties of ultra-high-strength steel 22MnB5 in the laser beam welding process10.3139/120.111322 ↗
11. Post-build thermomechanical processing of wire arc additively manufactured stainless steel for improved mechanical properties and reduction of crystallographic texture
12. Tailoring microstructure of wire arc additively manufactured c–mn–si steel with post process heat treatment10.1016/j.msea.2021.141921 ↗
13. Effect of post-deposition heat treatments on high-temperature wear and corrosion behavior of Inconel 625
14. A benchmark of mechanical properties and operational parameters of different steel filler metals for wire arc additive manufacturing10.1007/s00170-023-11520-z ↗
15. Analysis of fracture toughness properties of wire + arc additive manufactured high strength low alloy structural steel components10.1016/j.msea.2019.138285 ↗
16. Tensile behaviour of WAAM high strength steel material and members10.1016/j.matdes.2023.112517 ↗
17. Achieving enhanced strength and ductility in 316L stainless steel via wire arc additive manufacturing using pulsed arc plasma10.1016/j.msea.2023.144711 ↗
18. A systematic review of additive manufacturing-based remanufacturing techniques for component repair and restoration10.1016/j.jmapro.2023.01.034 ↗
19. Die Metallurgie des Schweißens: eisenwerkstoffe - nichteisenmetallische Werkstoffe, 4., neu Bearb. Aufl
20. Plasma wire arc additive manufacturing and its influence on high-carbon steel substrate properties
21. Hardness, microstructure, and residual stresses in low carbon steel welding with post-weld heat treatment and temper bead welding10.1007/s11661-013-2170-4 ↗
22. Exploring temper bead welding
23. DIN EN ISO 18265:2014-02, Metallic Materials - Conversion of Hardness Values.
24. Bowden · 2001
25. Test method for the determination of flow curves and benchmark characteristic values for tensile testing by means of minor destructive indentation
26. Mechanical properties of constituent phases in structural steels and heat-affected zones investigated by statistical nanoindentation analysis10.1016/j.conbuildmat.2020.121211 ↗
27. Effect of pulse current GMAW on the yield stress of the S460M TMCP steel welded joints10.1007/s12540-022-01261-1 ↗
28. 2004
29. G. Petzow, Metallographisches, Keramographisches, Plastographisches Ätzen., 6. Auflage. Stuttgart: Gebrüder Borntraeger.
30. 2022
31. Essential refinements of spherical nanoindentation protocols for the reliable determination of mechanical flow curves10.1016/j.matdes.2018.03.003 ↗
32. Recent advances in nanomechanical and in situ testing techniques: towards extreme conditions10.1016/j.cossms.2023.101108 ↗
33. Extracting high-temperature stress–strain curves from a 1.2 μm silicon film using spherical nanoindentation10.1016/j.tsf.2024.140597 ↗
34. Coalesced bainite
35. Microstructural characterisation of As-Deposited and reheated weld metal — high strength steel weld metals10.1007/BF03266559 ↗
36. Microstructural insights into the coarse-grained heat-affected zone of a high-strength all-weld metal: development of a continuous cooling transformation diagram10.1007/s40194-024-01904-4 ↗
37. Kou · 2003
38. 2012
39. C · 2020
40. Dieter · 1988