journal article·2026-01Open access

Site-specific texture and its influence on mechanical behavior in direct energy deposited Ti-6Al-4V walls

Rajib Halder, Arjun Mahato, Souvik Sahoo, Jake T. Benzing, Shibayan Roy, Anthony D. Rollett

Abstract

Laser hot wire direct energy deposited (LHW-DED) Ti-6Al-4V wall structures experience variable cooling rates along the build direction as heat accumulates with wall height. These variations in thermal history affect the microstructure, texture, and texture-mediated mechanical response within the walls. In the present work, site-specific texture in single- and multi-walled specimens and its concomitant effect on the localized mechanical properties are investigated via large-scale EBSD characterization and a polycrystal plasticity model based on the viscoplastic self-consistent (VPSC) framework. The effect of secondary process parameters, viz. interlayer delay and scan strategy, on the texture evolution was also examined. The results revealed that the transformed and (prior) texture intensities simultaneously increase with increasing wall height. The reconstructed parent grain structure exhibits a strong cube texture with two fibers, namely and aligned parallel to the build direction in both single- and multi-walled specimens. VPSC simulations revealed the role of site-specific texture in the tensile properties and anisotropic mechanical behavior of the walls.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Cellular and Composite Structures · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Gibson · 2021 · vol. 17
2. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
3. The effect of interlayer delay on the heat accumulation, microstructures, and properties in laser hot wire directed energy deposition of Ti-6Al-4V single-wall10.3390/ma17133307 ↗
4. Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys10.1080/14686996.2017.1361305 ↗
5. A critical review on additive manufacturing of Ti-6Al-4V alloy: microstructure and mechanical properties10.1016/j.jmrt.2022.04.055 ↗
6. Microtexture in additively manufactured Ti-6Al-4V fabricated using directed energy deposition10.1016/j.msea.2018.07.098 ↗
7. Martensite decomposition during rapid heating of Ti-6Al-4V studied via in situ synchrotron X-ray diffraction10.1038/s43246-024-00492-6 ↗
8. Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: Part I. Microstructural characterization10.1007/s11661-004-0094-8 ↗
9. Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM)10.1016/j.msea.2011.10.095 ↗
10. Microstructures of laser-deposited Ti–6Al–4V10.1016/j.matdes.2003.09.009 ↗
11. Microstructure and texture evolution during solidification processing of Ti–6Al–4V10.1016/S0924-0136(02)00865-8 ↗
12. The influence of process parameters and scanning strategy on the texture in Ti6A14V parts produced by selective laser melting
13. The origin of microstructural diversity, texture, and mechanical properties in electron beam melted Ti-6Al-4V10.1007/s11661-010-0397-x ↗
14. Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti6Al4V by selective electron beam melting10.1016/j.matchar.2013.07.012 ↗
15. Powder bed fusion additive manufacturing using critical raw materials: A review10.3390/ma14040909 ↗
16. Electron beam melted Ti–6Al–4V: Microstructure, texture and mechanical behavior of the as-built and heat-treated material10.1016/j.msea.2015.11.052 ↗
17. Laser additive manufactured Ti-6Al-4V alloy: Texture analysis10.1016/j.matchemphys.2019.01.035 ↗
18. Variant selection and macrozone in Ti-6Al-4V walls during laser hot wire direct energy deposition10.1016/j.jmrt.2024.11.061 ↗
19. Additive manufacturing of Ti6Al4V alloy: A review10.1016/j.matdes.2018.107552 ↗
20. Deformation and fracture behavior of laser processed dense and porous Ti6Al4V alloy under static and dynamic loading10.1016/j.msea.2012.04.036 ↗
21. Fatigue of Ti6Al4V structural health monitoring systems produced by selective laser melting10.3390/ma9020106 ↗
22. Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing10.1016/j.actamat.2014.12.054 ↗
23. Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V10.1016/j.msea.2014.07.086 ↗
24. Texture and crystal orientation in Ti6Al4V builds fabricated by shaped metal deposition10.1007/s11661-010-0255-x ↗
25. Site-specific microstructure, porosity and mechanical properties of LENS™ processed Ti–6Al–4V alloy10.1016/j.msea.2021.141494 ↗
26. Texture analysis of additively manufactured Ti-6Al-4V using neutron diffraction
27. Neikter · 2017
28. Texture evolution as a function of scan strategy and build height in electron beam melted Ti-6Al-4V
29. Energy density analysis on single tracks formed by selective laser melting with CoCrMo powder material10.1007/s00170-013-4902-4 ↗
30. Metallographic preparation of titanium10.1515/pm-1984-210405 ↗
31. Texture analysis with MTEX–free and open source software toolbox10.4028/www.scientific.net/SSP.160.63 ↗
32. Parent grain reconstruction from partially or fully transformed microstructures in MTEX10.1107/S1600576721011560 ↗
33. Bunge · 1982
34. Material modeling with the visco-plastic self-consistent (VPSC) approach: Theory and practical applications
35. A self-consistent approach for modelling texture development of two-phase polycrystals: Application to titanium alloys10.1016/S1359-6454(97)00067-0 ↗
36. A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys
37. López · 2014
38. The determination of the elastic field of an ellipsoidal inclusion, and related problems
39. Simulation of the plastic response of Ti–6Al–4V thin sheet under different loading conditions using the viscoplastic self-consistent model10.1016/j.msea.2017.11.070 ↗
40. Three-dimensional modeling of the microstructure evolution during metal additive manufacturing10.1016/j.commatsci.2017.09.018 ↗
41. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
42. Ambient and high-temperature bulk characterization of additively manufactured Ti-6Al-4V using neutron diffraction10.1007/s11837-018-3038-2 ↗
43. Polycrystal plasticity modeling of the anisotropy of Ti-6Al-4V under static & dynamic loadings10.1016/j.matchar.2025.115037 ↗
44. On the anisotropic mechanical response of Ti6Al4V sheet at high strain rates10.4028/p-xq42f4 ↗
45. Crystallographic texture evolution of a zinc sheet subjected to different strain paths10.1007/s11661-017-4069-y ↗
46. Active slip mode analysis of an additively manufactured Ti-6Al-4V alloy via in-grain misorientation axis distribution10.3390/met12040532 ↗
47. Importance of basal slip on the plastic deformation behavior of zirconium alloy Zr70210.1016/j.jnucmat.2025.155655 ↗
48. Wang · 2011
49. Effect of β grain growth on variant selection and texture memory effect during α→β→α phase transformation in Ti–6 Al–4 V10.1016/j.actamat.2011.10.038 ↗
50. Microstructure characterisation of Ti-6Al-4V from different additive manufacturing processes10.1088/1757-899X/258/1/012007 ↗
51. Modeling the role of epitaxial grain structure of the prior β phase and associated fiber texture on the strength characteristics of Ti-6Al-4V produced via additive manufacturing10.3390/ma13102308 ↗
52. Pulsed laser-assisted additive manufacturing of Ti-6Al-4V for in-situ grain refinement10.1038/s41598-022-26758-y ↗
53. Grain refining of Ti-6Al-4V alloy fabricated by laser and wire additive manufacturing assisted with ultrasonic vibration10.1016/j.ultsonch.2021.105472 ↗
54. β-Grain refinement in WAAM Ti-6Al-4 V processed with inter-pass ultrasonic impact peening10.1016/j.mtla.2024.102236 ↗
55. W.G. Burgers, On The Process of Transition of the Cubic-Body-Centered Modification into the Hexagonal-Close-Packed Modification of Zirconium, Tech. Rep., 1934, p. 561.10.1016/S0031-8914(34)80244-3 ↗