Characterisation of irradiation damage in Fe–3Cr and Fe–5Cr: A study on the effects of chromium content and temperature
Source abstract
Abstract
Fe–Cr binary alloys serve as simplified model systems to study irradiation damage relevant to fusion structural materials. Here, Fe-3 %Cr and Fe-5 %Cr samples were irradiated with 4 MeV Fe ions under a dose rate of 4 × 10 −5 dpa/s across a linear thermal gradient (120°C-480 °C) in a single experiment, enabling direct comparison of temperature and Cr content effects under identical conditions. Depth-resolved Laue micro-diffraction (∼10 −4 strain sensitivity), nanoindentation, and AFM reveal non-monotonic evolution of lattice strain and hardness: both decrease with temperature up to ∼300 °C, then increase beyond. This turning point reflects changes defect mobility and solute-defect clustering, which stabilize damage. Fe-3 %Cr shows consistently higher strain and hardening than Fe-5 %Cr, especially at lower temperatures. Minimal change in post-indentation pile-up indicates limited softening or localization. These results highlight how Cr content and temperature jointly affect irradiation response, offering new insights into defect evolution in fusion-relevant alloys. • Single-sample irradiation under thermal gradient reduces variability in results. • Swelling decreases to 300 °C, then rises, marking a defect stability transition. • Higher Cr reduces swelling below 300 °C but shows no effect at higher temperatures. • Hardness vs temperature shows a V-shape with a minimum at 300 °C. • Strain penetrates ∼3 × deeper than SRIM prediction, implying high defect mobility.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fusion materials and technologies · Metal and Thin Film Mechanics · Ion-surface interactions and analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (83)
Show source-provided references
1. Overview on the management of radioactive waste from fusion facilities: ITER, demonstration machines and power plants10.1088/1741-4326/ac62f7 ↗
2. Challenges for plasma-facing components in nuclear fusion10.1063/1.5090100 ↗
3. Materials research for fusion10.1038/nphys3735 ↗
4. Structural materials for next generation nuclear systems: challenges and the path forward10.1016/j.nucengdes.2015.09.015 ↗
5. Material testing facilities and programs for plasma-facing component testing10.1088/1741-4326/aa4feb ↗
6. Thermal-hydraulic analysis of the First Wall of a CO2 cooled pebble bed breeding blanket for the EU-DEMO10.1016/j.fusengdes.2018.11.057 ↗
7. Thermal and structural analysis of JT-60SA actively cooled divertor target submitted to high heat flux10.1016/j.fusengdes.2023.114133 ↗
8. Blanket cooling of a fusion reactor10.3390/en16041890 ↗
9. Impact of deuterium plasma flux on fusion reactor materials: radiation damage, surface modification, erosion10.1134/S1063778821070048 ↗
10. Recent advances in characterising irradiation damage in tungsten for fusion power10.1007/s42452-019-1591-0 ↗
11. Radiation damage in ferritic/martensitic steels for fusion reactors: a simulation point of view10.1088/0029-5515/47/12/007 ↗
12. Evolution of vacancy defects in heavy ion irradiated tungsten exposed to helium plasma10.1016/j.jnucmat.2020.152051 ↗
13. Clustering of transmutation elements tantalum, rhenium and osmium in tungsten in a fusion environment10.1088/1741-4326/aa70b2 ↗
14. Radiation damage studies in fusion reactor steels by means of small-angle neutron scattering (SANS)10.1016/j.physb.2017.12.040 ↗
15. Proton and Au-ion irradiation induced damage and hardening in ferritic/martensitic steel
16. The influence of Fe-ion irradiation on the microstructure of reduced activation ferritic-martensitic steel Eurofer 9710.1088/1741-4326/ab1e18 ↗
17. Radiation-Induced Helium bubbles in metals10.3390/ma12071036 ↗
18. Helium-hydrogen synergistic effects in structural materials under fusion neutron irradiation10.3389/fmats.2022.849115 ↗
19. The influence of the ion implantation on the degradation level of the coated particles of nuclear fuel samples10.3390/coatings13030556 ↗
20. Neutron-enhanced annealing of ion-implantation induced damage in silicon heated by nuclear reactions10.1016/j.nimb.2014.05.001 ↗
21. Development of benchmark reduced activation ferritic/martensitic steels for fusion energy applications10.1088/1741-4326/57/9/092004 ↗
22. Development of new generation reduced activation ferritic-martensitic steels for advanced fusion reactors10.1016/j.jnucmat.2016.05.037 ↗
23. Ferritic-martensitic steels for fission and fusion applications10.1016/j.jnucmat.2019.05.058 ↗
24. Towards a programme of testing and qualification for structural and plasma-facing materials in ‘fusion neutron’ environments10.1088/1741-4326/aa60af ↗
25. Cavity swelling in irradiated materials
26. Comparison of swelling and irradiation creep behavior of fcc-austenitic and bcc-ferritic/martensitic alloys at high neutron exposure10.1016/S0022-3115(99)00225-1 ↗
27. Materials to be used in future magnetic confinement fusion reactors: a review10.3390/ma15196591 ↗
28. Multiphysics optimization for first Wall design enhancement in water-cooled breeding blankets
29. Overview of reactor systems and operational environments for structural materials in fusion reactors
30. Materials research and development opportunities in fusion reactors10.16943/ptinsa/2015/v81i4/48299 ↗
31. Pronounced inhibitory mechanism of Cr on vacancy-like defects in Fe9Cr alloy irradiation with helium ions
32. Void swelling in binary FeCr alloys at 200 dpa10.1016/0022-3115(95)00053-4 ↗
33. Swelling and dislocation evolution in simple ferritic alloys irradiated to high fluence in FFTF/MOTA10.1016/0022-3115(94)00669-5 ↗
34. Microstructural changes and their effect on hardening in neutron irradiated Fe-Cr alloys10.1016/j.jnucmat.2019.03.022 ↗
35. Nanoindentation of single- (Fe) and dual-beam (Fe and He) ion-irradiated ODS Fe-14Cr-based alloys: effect of the initial microstructure on irradiation-induced hardening10.1016/j.jnucmat.2019.02.037 ↗
36. Vacancy-solute clustering in Fe–Cr alloys after neutron irradiation10.1016/j.jnucmat.2020.152341 ↗
37. Co-evolution of point defects and Cr-rich nano-phase in binary Fe-20 at.% Cr alloy: a comprehensive investigation using positron annihilation spectroscopy and atom probe tomography10.1016/j.actamat.2024.119740 ↗
38. Investigation of the thermo-mechanical behavior of neutron-irradiated Fe-Cr alloys by self-consistent plasticity theory10.1016/j.jnucmat.2016.05.012 ↗
39. The correlation between the microstructural parameters and mechanical properties of reduced activation ferritic–martensitic (RAFM) steel: influence of roll deformation and medium temperature tempering10.1007/s11661-020-06089-1 ↗
40. TEM characterisation of heavy-ion irradiation damage in FeCr alloys10.1016/j.jnucmat.2008.12.078 ↗
41. Characterisation of Cr, Si and P distribution at dislocations and grain-boundaries in neutron irradiated Fe-Cr model alloys of low purity10.1016/j.jnucmat.2012.11.027 ↗
42. Characterization of helium implanted Fe-Cr alloys by means of positron annihilation methods10.1016/j.jnucmat.2013.10.039 ↗
43. Radiation tolerance of neutron-irradiated model Fe-Cr-Al alloys10.1016/j.jnucmat.2015.06.023 ↗
44. A study of defects in iron-based binary alloys by the Mössbauer and positron annihilation spectroscopies10.1063/1.4868471 ↗
45. Exploitation of thermal gradients for investigation of irradiation temperature effects with charged particles10.1038/s41598-019-49585-0 ↗
46. Helium-implantation-induced lattice strains and defects in tungsten probed by X-ray micro-diffraction10.1016/j.matdes.2018.11.001 ↗
47. Procurement of pure Fe metal and Fe-based alloys with controlled chemical alloying element contents and microstructure
48. Development of the dual-beam ion irradiation facility for fusion materials (DiFU)10.3390/ma16031144 ↗
49. Ab initio threshold displacement energies in iron10.1080/21663831.2016.1181680 ↗
50. On the use of SRIM for calculating vacancy production: quick calculation and full-cascade options10.1016/j.nimb.2021.06.018 ↗
51. Differential-aperture X-ray structural microscopy: a submicron-resolution three-dimensional probe of local microstructure and strain10.1016/j.micron.2004.02.004 ↗
52. High resolution mapping of orientation and strain gradients in metals by synchrotron 3D X-ray laue microdiffraction10.3390/qubs3010006 ↗
53. A look-up table based approach to characterize crystal twinning for synchrotron X-ray Laue microdiffraction scans10.1107/S1600576715004896 ↗
54. Alignment of sample position and rotation during in situ synchrotron X-ray micro-diffraction experiments using a Laue cross-correlation approach10.1107/S1600576719010562 ↗
55. Jon tischler n.d. https://sector33.xray.aps.anl.gov/∼tischler/(accessed January 27, 2025).
56. Helium-implantation-induced lattice strains and defects in tungsten probed by X-ray micro-diffraction10.1016/j.matdes.2018.11.001 ↗
57. Analysis of position-dependent cavity parameters in irradiated metals to obtain insight on fundamental defect migration phenomena10.1016/j.matdes.2023.111668 ↗
58. Opportunities and limitations for ion beams in radiation effects studies: bridging critical gaps between charged particle and neutron irradiations10.1016/j.scriptamat.2017.06.041 ↗
59. Nanoindentation of model Fe-Cr alloys with self-ion irradiation10.1016/j.jnucmat.2012.09.003 ↗
60. Deformation behaviour of ion-irradiated FeCr: a nanoindentation study10.1557/s43578-022-00613-2 ↗
61. Investigation of anisotropic hardening response in a 12Cr-ODS ferritic steel subjected to 2.8 MeV Fe2+ irradiation10.1016/j.jnucmat.2020.152016 ↗
62. Deformation localisation in ion-irradiated Fe and Fe10Cr10.1016/j.jnucmat.2024.155104 ↗
63. Effects of irradiation temperature and dose rate on the mechanical properties of self-ion implanted Fe and Fe–Cr alloys10.1016/j.jnucmat.2013.03.052 ↗
64. Irradiation damage concurrent challenges with RAFM and ODS steels for fusion reactor first-wall/blanket: a review
65. Characterising ion-irradiated FeCr: hardness, thermal diffusivity and lattice
66. Effect of chromium on void swelling in ion irradiated high purity Fe-Cr alloys10.1016/j.actamat.2016.02.027 ↗
67. Temperature-dependent cavity swelling in dual-ion irradiated Fe and Fe-Cr ferritic alloys10.1016/j.actamat.2021.116660 ↗
68. Dynamic observation of dual-beam irradiated Fe and Fe-10Cr alloys at 435 °C10.1016/j.actamat.2021.116793 ↗
69. Relaxation volumes of microscopic and mesoscopic irradiation-induced defects in tungsten10.1063/1.5094852 ↗
70. Effect of Cr on the mechanical properties and microstructure of Fe–Cr model alloys after n-irradiation10.1016/j.jnucmat.2008.02.061 ↗
71. Neutron irradiation effects in Fe and Fe-Cr at 300 °C10.1016/j.actamat.2016.03.060 ↗
72. On the origin of primary ½ a0 <111> and a0 <100> loops in irradiated Fe(Cr) alloys10.1016/j.actamat.2017.02.041 ↗
73. Impact of He and Cr on defect accumulation in ion-irradiated ultrahigh-purity Fe(Cr) alloys10.1016/j.actamat.2013.08.007 ↗
74. Correlation of fast neutron, fusion neutron and electron irradiations based on the dislocation loop density10.1016/0022-3115(90)90241-E ↗
75. Heavy-ion irradiations of Fe and Fe-Cr model alloys part 2: damage evolution in thin-foils at higher doses10.1080/14786430802380477 ↗
76. Precipitation of Cr-rich clusters in Fe-Cr alloys: effects of irradiation from first principles modeling and experimental observations10.1016/j.jnucmat.2023.154715 ↗
77. Resolution of the carbon contamination problem in ion irradiation experiments10.1016/j.nimb.2017.08.039 ↗
78. Irradiation damage concurrent challenges with RAFM and ODS steels for fusion reactor first-wall/blanket: a review
79. Macro-Scale strain localization in highly irradiated stainless steel investigated using digital image correlation10.1016/j.actamat.2022.117858 ↗
80. Deformation mode maps for tensile deformation of neutron-irradiated structural alloys10.1016/j.jnucmat.2004.08.006 ↗
81. Hardening and strain localisation in helium-ion-implanted tungsten10.1038/s41598-019-54753-3 ↗
82. Hardie CD, Roberts SG, Bushby AJ. Understanding the Effects of Ion Irradiation Using Nanoindentation Techniques. n.d.
83. Liu W. X-ray Laue Diffraction Microscopy in 3D at 34-ID-E, APS White or Mono X-rays K-B Mirrors Area Detectors Differential Aperture Sample Coordinates of Detector Images Coordinates of Sample and Wire Stages n.d.