journal article·2025-12Open access

Modelling microstructural evolution and creep behaviour of a novel martensitic 10 % Cr steel: a physics-based mean-field approach

Laura Witzmann, Florian Riedlsperger, Philipp Kürnsteiner, Dirk Kulawinski, John Hald, Bernhard Krenmayr, Heiko Groiss, Bernhard Sonderegger

Abstract

Creep deformation significantly limits the lifespan of components in high-temperature applications, such as thermal power plants, and understanding its underlying microstructural mechanisms is essential for accurately predicting plastic deformation, which may vary considerably depending on the initial microstructure. Here, we refined a physics-based mean-field model and applied it to a novel 10% Cr martensitic steel alloy. The model is based on an initial microstructure which includes subgrain size and various dislocation density types, and on precipitate evolution obtained from MatCalc, and describes both creep deformation and microstructural evolution. To this end, we incorporated enhanced treatment of physical phenomena, such as the Zener pinning effect, refined pipe diffusion, the solute drag effect, and temperature-dependent mechanical properties. We validated our model using precipitation kinetics simulations and comprehensive experimental investigations, including electron backscatter diffraction (EBSD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), of samples in one as-received and one post-creep state (210 MPa at 600°C). The model is effective for predicting creep rates and simulating microstructural evolution, and aligns well with experimental results. Further, it offers insights into dislocation evolution and precipitate interactions, thus establishing a link between microstructure and macroscopic properties, which in turn enables multi-scale modelling. This model provides a useful tool for predicting creep behaviour and optimising high-temperature materials, and hence for guiding material design in both academic research and industrial applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Thermodynamics and its prediction and CALPHAD modeling: review, state of the art, and perspectives10.1016/j.calphad.2023.102580 ↗
2. Ab initio study of Cr interactions with point defects in bcc Fe10.1103/PhysRevB.75.014110 ↗
3. Fundamental models for the creep of metals
4. Problems of plastic gliding10.1088/0959-5309/52/1/303 ↗
5. Anderson · 2017
6. The kinetics of static recovery by dislocation climb10.1038/s41524-022-00790-y ↗
7. A crystal plasticity-based approach for creep-fatigue life prediction and damage evaluation in a nickel-based superalloy10.1016/j.ijfatigue.2020.106031 ↗
8. Application of an advanced mean-field dislocation creep model to P91 for calculation of creep curves and time-to-rupture diagrams10.1016/j.mtla.2020.100760 ↗
9. Application of a physically-based dislocation creep model to P92 for constructing TTR diagrams10.1080/09603409.2022.2037326 ↗
10. Prediction of TTR diagrams via physically based creep simulations of martensitic 9-12% Cr-Steels10.4028/p-C6bEBF ↗
11. The evolution of dislocation density during heat treatment and creep of tempered martensite ferritic steels10.1016/S1359-6454(03)00324-0 ↗
12. On the contribution of carbides and micrograin boundaries to the creep strength of tempered martensite ferritic steels10.1016/j.actamat.2006.08.046 ↗
13. Martensitic steels for rotors in ultra-supercritical power plants
14. Laboratory and pilot commercial Process/Product develeopment of modified 9Cr-1Mo ferritic alloy
15. Modified 9 Cr - 1 Mo steel - an improved alloy for steam generator application
16. High temperature forged components for advanced steam power plants
17. Development of creep resistant cast steels within the European Collaboration in advanced steam turbine materials for ultra efficient low emission steam power plant/COST 501-522
18. Alloy Design of MARBN for Boiler and Turbine Applications at 650 o C10.1080/09603409.2021.1963393 ↗
19. BN type inclusions formed in high Cr ferritic heat resistant steel10.1179/174892406X160624 ↗
20. Microstructural aspects of superior creep resistance of a 10%Cr martensitic steel10.1016/j.msea.2016.09.096 ↗
21. Precipitates evolution during creep in advanced 9%Cr martensitic steel containing boron for turbine rotors
22. Mechanism for boron nitrogen strengthening in martensitic creep resistant steels
23. Mechanism for boron nitrogen strengthening of creep strength enhanced ferritic steels
24. Numerical simulation to the effect of soluble nitrogen on high-temperature strength of ferritic heat-resistant steels10.2320/jinstmet1952.63.4_440 ↗
25. Numerical approach to the I-S effect in ferritic heat-resisting steels10.1016/S0921-5093(97)00153-6 ↗
26. Effect of nitrogen on the high temperature creep behavior of 9Cr-2Co steel10.2355/isijinternational.37.181 ↗
27. Creep of ferritic steels
28. Hättestrand
29. Phase transitions of copper precipitates in Fe–Cu alloys10.1080/01418610108217139 ↗
30. Atomistic and continuums modeling of cluster migration and coagulation in precipitation reactions10.1016/j.commatsci.2012.02.033 ↗
31. Role of copper on Laves phase morphology in 9-12%Cr steels10.1088/1757-899X/219/1/012015 ↗
32. Creep behavior of a 10%Cr heat-resistant martensitic steel with low nitrogen and high boron contents at 650 °C10.1016/j.msea.2019.138353 ↗
33. Neddemeyer · 2023
34. Assessment of geometrically necessary dislocation levels derived by 3D EBSD10.1016/j.actamat.2015.06.051 ↗
35. About quantitative EBSD analysis of deformation and recovery substructures in pure Tantalum10.1088/1757-899X/89/1/012038 ↗
36. Dislocations with edge components in nanocrystalline bcc Mo10.1557/jmr.2012.403 ↗
37. Effect of grain orientation on deformation structure in cold-rolled polycrystalline aluminium10.1016/S1359-6454(98)00229-8 ↗
38. Microstructurally based modeling of creep deformation and damage in martensitic steels
39. A dislocation model for creep in engineering materials
40. Microstructural development during high temperature creep of 9% Cr steel10.1016/S0921-5093(97)00708-9 ↗
41. Dislocation-based modeling of long-term creep behaviors of Grade 91 steels10.1016/j.actamat.2018.02.001 ↗
42. Evolution of microstructure and deformation resistance in creep of tempered martensitic 9–12%Cr–2%W–5%Co steels10.1016/j.actamat.2006.02.038 ↗
43. Modelling the creep behaviour of tempered martensitic steel based on a hybrid approach10.1016/j.msea.2016.03.071 ↗
44. Grains, phases, and interfaces: an interpretation of microstructure
45. Modelling stress relaxation after hot deformation: Microstructure-property relationships in Nb-bearing steels10.1016/j.ijplas.2022.103219 ↗
46. A model for static recrystallization with simultaneous precipitation and solute drag10.1007/s11661-016-3524-5 ↗
47. The impurity-drag effect in grain boundary motion10.1016/0001-6160(62)90092-5 ↗
48. Mean-Field microstructure kinetics modeling
49. Modelling of kinetics in multi-component multi-phase systems with spherical precipitates I: theory
50. X-ray diffraction Rietveld analysis of cold worked austenitic stainless steel10.1016/j.matlet.2011.09.065 ↗
51. Study on dislocation density, microstructure, and mechanical properties of P92 steel for different heat treatment conditions10.1002/mawe.202100023 ↗
52. Experimental and computational study of cementite precipitation in tempered martensite10.1088/0965-0393/23/5/055012 ↗
53. Thermodynamic modelling and microstructural study of Z-phase formation in a Ta-alloyed martensitic steel10.3390/ma14061332 ↗
54. Fine (Cr,Fe)2B borides on grain boundaries in a 10Cr–0.01B martensitic steel10.1016/j.scriptamat.2018.07.021 ↗
55. Scheil–Gulliver simulation with partial redistribution of fast diffusers and simultaneous solid–solid phase transformations10.3139/146.101535 ↗
56. Thermo-kinetic modeling of Cu precipitation in α-Fe10.1016/j.actamat.2015.08.042 ↗
57. Statistical theory of nucleation, condensation and coagulation10.1080/00018737600101402 ↗
58. Grade 92 creep-strength-enhanced ferritic steel
59. Influence of heat treatments on microstructural parameters and mechanical properties of P92 steel10.1179/026708300101506993 ↗
60. Characterisation of the Micro- and nanoscale structure of new creep-resistant steels for use in advanced USC steam power plants10.2320/matertrans.48.931 ↗
61. Microstructural stability and creep rupture strength of the martensitic steel P92 for advanced power plant10.1016/S1359-6454(97)00176-6 ↗
62. Microstructure-based creep modelling of a 9%Cr martensitic steel10.3184/096034008X354873 ↗
63. Free dislocations and boundary dislocations in tempered martensite ferritic steels10.1016/j.msea.2004.03.080 ↗
64. Über die vermeintliche Isomerie des roten und gelben Quecksilberoxyds und die Oberflächenspannung fester Körper10.1515/zpch-1900-3431 ↗
65. The kinetics of precipitation from supersaturated solid solutions10.1016/0022-3697(61)90054-3 ↗
66. Self-Diffusion in grain boundaries and dislocation pipes in Al, Fe, and Ni and application to AlN precipitation in steel10.1007/s11665-014-0921-z ↗
67. Analyse des Spannungsrelaxationsverhaltens von P91-Stahl: potential für eine verbesserte Vorhersage des Primärkriechverhaltens
68. Characterization of geometrically necessary dislocation evolution during creep of P91 steel using electron backscatter diffraction10.1016/j.matchar.2022.112501 ↗
69. Creep properties, creep deformation behavior, and microstructural evolution of 9Cr-3W-3Co-1CuVNbB martensite ferritic steel10.1016/j.msea.2017.11.061 ↗
70. Microstructural insights into creep of Ni-based alloy 617 at 700 °C provided by electron microscopy and modelling10.1016/j.matchar.2023.112720 ↗
71. Recent progress in the microstructurally based creep modelling of Ni-based alloy 61710.1080/09603409.2023.2281123 ↗
72. CreeSo – software for creep simulation of complex alloys10.1080/09603409.2022.2058237 ↗