Multi-modal microstructure evolution and strengthening mechanisms in Al6Si1Mg0.5Er1Zr alloy fabricated by laser powder bed fusion
Source abstract
Abstract
This study presents the first systematic investigation of multi-modal microstructure regulation strategies and their strengthening mechanisms in an Al6Si1Mg0.5Er1Zr (wt.%) alloy fabricated via laser powder bed fusion (LPBF). Through comprehensive analysis of the coupled evolution between nanoprecipitates and grain structure during direct aging (DA), high-temperature solid solution (SS) treatment, and solid solution and aging (T6) heat treatment, we reveal the synergistic grain refinement mechanism induced by Er/Zr co-addition. A novel quantitative characterization methodology combining EBSD with k-means clustering algorithm was developed to elucidate the multi-scale heterogeneous grain architecture in additively manufactured aluminum alloys, particularly identifying SS treatment-induced grain growth behavior. Multiple distinct strengthening regimes were achieved through optimized aging pathways: a nano-Si precipitation-dominated system via DA (175 °C/10 h) and a β″-Mg2Si precipitation-controlled system through T6 (540 °C/1 h + 175 °C/5 h). Experimental results demonstrate that the yield strength (208–373 MPa) and elongation (5.5–14.5 %) can be synergistically modulated through heat treatment, thus offering a novel microstructure engineering approach for optimizing the strength-plasticity combinations in additively manufactured aluminum alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. Heat treatment of aluminium alloys produced by laser powder bed fusion: a review10.1016/j.matdes.2021.109651 ↗
2. 3D printing of Aluminium alloys: additive manufacturing of aluminium alloys using selective laser melting10.1016/j.pmatsci.2019.100578 ↗
3. Understanding melt pool characteristics in laser powder bed fusion: an overview of single- and multi-track melt pools for process optimization
4. Additive manufacturing: a new design approach-LPBF design and production flow chart algorithm10.1007/s40964-024-00878-5 ↗
5. A review of research on aluminum alloy materials in structural engineering
6. A review on traditional processes and laser powder bed fusion of aluminum alloy microstructures, mechanical properties, costs, and applications10.3390/ma17112553 ↗
7. A review on the correlation between microstructure, heat treatment and mechanical properties of additively manufactured AlSi10Mg by LPBF
8. Recent progress on microstructure manipulation of aluminium alloys manufactured via laser powder bed fusion10.1080/17452759.2022.2125880 ↗
9. Composition-dependent solidification cracking of aluminum-silicon alloys during laser powder bed fusion
10. Effect of heat treatments on microstructure and mechanical properties of AlSi7Mg fabricated by selective laser melting10.1007/s11665-021-06324-9 ↗
11. Effect of heat treatments on microstructure and mechanical properties of AlSi10Mg alloys fabricated by laser powder bed fusion10.1007/s00170-023-11812-4 ↗
12. A selective laser melting and solution heat treatment refined Al–12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility10.1016/j.actamat.2015.05.017 ↗
13. Microstructure and mechanical properties of a hypereutectic al–si–cu alloy manufactured by laser powder bed fusion
14. Solute trapping and non-equilibrium microstructure during rapid solidification of additive manufacturing10.1038/s41467-023-43563-x ↗
15. Cellular size dependence on the strength of additively manufactured austenitic stainless steel
16. Selective laser melting of Er modified AlSi7Mg alloy: effect of processing parameters on forming quality, microstructure and mechanical properties10.1016/j.msea.2022.143085 ↗
17. Machine-learning assisted laser powder bed fusion process optimization for AlSi10Mg: new microstructure description indices and fracture mechanisms10.1016/j.actamat.2020.10.010 ↗
18. Evolution of multi-cellular structure on Zr and Er modified Al6Si1Mg alloy fabricated by laser powder bed fusion10.1016/j.jmrt.2023.05.232 ↗
19. Effects of direct aging treatment on microstructure, mechanical properties and residual stress of selective laser melted AlSi10Mg alloy10.1016/j.jmst.2022.08.032 ↗
20. Aging response of an A357 Al alloy processed by selective laser melting10.1002/adem.201800406 ↗
21. Ad hoc heat treatments for selective laser melted Alsi10mg alloy aimed at stress-relieving and enhancing mechanical performances10.1007/s11837-019-03973-z ↗
22. Multiple precipitation pathways in an Al-7Si-0.6Mg alloy fabricated by selective laser melting10.1016/j.scriptamat.2018.09.045 ↗
23. Changes in the microstructure and mechanical properties of additively manufactured AlSi10Mg alloy after exposure to elevated temperatures10.1016/j.matchar.2018.01.028 ↗
24. Enhancement in mechanical properties of selectively laser-melted AlSi10Mg aluminum alloys by T6-like heat treatment10.1016/j.msea.2018.07.103 ↗
25. Effect of heat treatment on the microstructure and mechanical properties of Er-containing Al–7Si–0.6 Mg alloy by laser powder bed fusion10.1016/j.jmrt.2022.04.023 ↗
26. Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment10.1016/j.matchar.2018.04.022 ↗
27. Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy10.1016/j.msea.2018.10.026 ↗
28. A comparative study of the effects of thermal treatments on AlSi10Mg produced by laser powder bed fusion
29. Heat treatment effect on the mechanical properties and fracture mechanism in AlSi10Mg fabricated by additive manufacturing selective laser melting process10.1016/j.msea.2018.05.074 ↗
30. Effect of Er and Zr additions and aging treatment on grain refinement of aluminum alloy fabricated by laser powder bed fusion10.1016/j.jallcom.2022.165237 ↗
31. Microstructure and mechanical properties of Al-Mg-Mn-Er-Zr alloys fabricated by laser powder bed fusion10.1016/j.matdes.2022.111064 ↗
32. Effect of aging treatment on phase evolution and mechanical properties of selective laser melted Al-Mg-Er-Zr alloy10.1016/j.matlet.2022.133001 ↗
33. Approaching an ultrafine microstructure and excellent tensile properties of a novel Er/Zr modified Al–7Si-0.6 Mg alloy fabricated by selective laser melting10.1016/j.jmrt.2022.12.040 ↗
34. Influence of post-heat treatment on the microstructure and mechanical properties of Al-Cu-Mg-Zr alloy manufactured by selective laser melting10.1016/j.jmst.2021.09.036 ↗
35. Strength and strain hardening of a selective laser melted AlSi10Mg alloy10.1016/j.scriptamat.2017.07.025 ↗
36. Study of precipitation in Al–Mg–Si alloys by atom probe tomography II. Influence of Cu additions10.1016/j.actamat.2015.08.018 ↗
37. Characterization of nanostructures in a high pressure die cast Al-Si-Cu alloy10.1016/j.actamat.2021.117500 ↗
38. Erbium and ytterbium solubilities and diffusivities in aluminum as determined by nanoscale characterization of precipitates10.1016/j.actamat.2009.05.007 ↗
39. Effect of heat treatment on the microstructure and anisotropy in mechanical properties of A357 alloy produced by selective laser melting10.1016/j.matdes.2018.05.026 ↗
40. Towards a high strength aluminium alloy development methodology for selective laser melting10.1016/j.matdes.2019.107775 ↗
41. Criteria for developing castable, creep-resistant aluminum-based alloys–A review10.1515/ijmr-2006-0042 ↗
42. The crystal structure of Ni4Mo10.1063/1.1723945 ↗
43. Additively manufactured fine-grained ultrahigh-strength bulk aluminum alloys with nanostructured strengthening defects10.1016/j.mattod.2024.05.006 ↗
44. An SLM-processed Er- and Zr- modified Al–Mg alloy: microstructure and mechanical properties at room and elevated temperatures
45. Synergy of tensile strength and ductility in a novel additively manufactured Al-Mg-Mn-Er-Zr alloy with a trilevel equiaxed heterogeneous structure10.1080/17452759.2024.2440039 ↗
46. Microstructure and mechanical properties of a precipitation-strengthened Al-Zr-Sc-Er-Si alloy with a very small Sc content10.1016/j.actamat.2017.10.040 ↗
47. Modulating the damping capacity of SLMed AlSi10Mg trough stress-relieving thermal treatments
48. On the silicon spheroidization in Al–Si alloys10.1016/S1471-5317(03)00010-5 ↗
49. Stability and stoichiometry of L12 Al3(Sc,Zr) dispersoids in Al-(Si)-Sc-Zr alloys10.1016/j.actamat.2021.117117 ↗
50. Rapid solidification and non-equilibrium phase constitution in Laser Powder Bed Fusion (LPBF) of AlSi10Mg alloy: analysis of nano-precipitates, eutectic phases, and hardness evolution10.1007/s11661-019-05505-5 ↗
51. The crystal structure of the β″ phase in al–mg–si alloys10.1016/S1359-6454(97)00493-X ↗
52. Effect of post-process heat treatment on microstructure and properties of selective laser melted AlSi10Mg alloy10.1016/j.matlet.2018.09.109 ↗
53. Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments10.1016/j.msea.2017.08.029 ↗
54. Effect of annealing on anisotropic tensile properties of Al–12%Si alloy fabricated by laser powder bed fusion10.3390/cryst10111007 ↗
55. The Al-Zr (aluminum-zirconium) system10.1007/BF02667556 ↗
56. Microstructure prediction of selective laser melting AlSi10Mg using finite element analysis10.1016/j.matdes.2018.01.022 ↗
57. A model for solute evolution in laser powder bed fused Al-Si alloys and its application to improve thermal conductivity10.1016/j.actamat.2023.119444 ↗
58. Prismatic substructure formed during solidification of metals10.1139/p53-003 ↗
59. (aluminum-erbium)10.1007/s11669-011-9877-y ↗
60. On the Zener drag10.1016/0001-6160(85)90214-7 ↗
61. The effect of erbium on the microstructure and mechanical properties of Al–Mg–Mn–Zr alloy10.1016/j.msea.2009.02.045 ↗
62. Coarsening resistance at 400 °C of precipitation-strengthened Al–Zr–Sc–Er alloys10.1016/j.actamat.2011.07.057 ↗
63. The crystal structure of the β′ phase in Al–Mg–Si alloys10.1016/j.actamat.2007.02.032 ↗
64. Accurately measured precipitate–matrix misfit in an Al–Mg–Si alloy by electron microscopy10.1016/j.scriptamat.2016.02.031 ↗
65. Influence of Cu on the mechanical properties and precipitation behavior of AlSi7Mg0.5 alloy during aging treatment10.1016/j.scriptamat.2005.08.044 ↗
66. The Al-Si (aluminum-silicon) system10.1007/BF02868729 ↗
67. Machine learning-augmented modeling on the formation of Si-dominated Non-β″ early-stage precipitates in Al-Si-Mg alloys with Si supersaturation induced by non-equilibrium solidification10.1016/j.actamat.2024.120454 ↗
68. Revision of the classical nucleation theory for supersaturated solutions
69. Precipitate formation in aluminium alloys: Multi-scale modelling approach10.1016/j.actamat.2020.05.050 ↗
70. Diffusion coefficients of some solutes in fcc and liquid Al: critical evaluation and correlation10.1016/S0921-5093(03)00624-5 ↗
71. First-principles calculations of β″-Mg5Si6/α-Al interfaces10.1016/j.actamat.2007.06.045 ↗
72. First-principles calculation of interface binding strength and fracture performance of β’/Al interface in Al–Mg–Si–Cu alloy
73. Additive manufacturing and mechanical properties of the dense and crack free Zr-modified aluminum alloy 6061 fabricated by the laser-powder bed fusion
74. Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms10.1016/j.actamat.2020.03.060 ↗
75. Superior mechanical properties of a selective-laser-melted AlZnMgCuScZr alloy enabled by a tunable hierarchical microstructure and dual-nanoprecipitation10.1016/j.mattod.2021.11.019 ↗
76. A statistical theory of solid solution hardening10.1002/pssb.19700410221 ↗
77. Structure-property models in Al-Zn-Mg-Cu alloys: a critical experimental assessment of shape castings10.1016/j.msea.2018.07.048 ↗
78. Solute strengthening from first principles and application to aluminum alloys10.1016/j.actamat.2012.03.037 ↗
79. The study on the coarsening process and precipitation strengthening of Al3Er precipitate in Al–Er binary alloy10.1016/j.jallcom.2014.04.093 ↗
80. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy10.1016/j.actamat.2013.09.042 ↗
81. Modelling of the age hardening behaviour of Al–Mg–Si alloys10.1016/S1359-6454(00)00301-3 ↗
82. Strengthening mechanisms in direct metal laser sintered AlSi10Mg: Comparison between virgin and recycled powders
83. Liu · 2019 · 168
84. Effects of platform pre-heating and thermal-treatment strategies on properties of AlSi10Mg alloy processed by selective laser melting10.3390/met8110954 ↗
85. Microstructure and mechanical properties of Al–12Si produced by selective laser melting: effect of heat treatment10.1016/j.msea.2013.10.023 ↗