Lean tool steel processed via laser powder bed fusion: in situ observation of transformation induced plasticity
Source abstract
Abstract
The high industrial demand for sustainable tooling concepts is a strong driving force for the development of lean steels and manufacturing processes. Thereby, additive manufacturing has been gaining momentum in tool and mold manufacturing for several years due to its ability to create complex designs in significantly shorter time than traditional processing methods, often at a reduced cost. This study presents a lean Fe92.65Cr4.2V2.1B0.05C1 (wt.%) cold-work tool steel processable via laser powder bed fusion (PBF-LB/M) without additional substrate plate heating. In the as-built state, a microstructure composed of austenite, martensite, V-rich carbides and a B-enriched phase was concluded from investigations with electron backscatter diffraction, X-ray diffraction and transmission electron microscopy. This complex microstructure provides a high ultimate compressive strength of 4935 ± 101 MPa, adequate compressive fracture strain and a pronounced work hardening. In particular, the work hardening can be also ascribed to the transformation of retained austenite into martensite, in the means of transformation induced plasticity (TRIP) effect, which was demonstrated by in situ synchrotron measurements during quasi-static compression testing. Such a martensitic transformation was also detected after pin on disc experiments, promoting a superior performance of Fe92.65Cr4.2V2.1B0.05C1. In comparison to a commercial high alloyed cold-work tool steel (1.2379) which was tested under identical conditions, the lean steel fabricated by PBF-LB/M, revealed higher ultimate compressive strength under quasi-static compression load, similar compressive fracture strain and a significantly enhanced abrasive wear resistance. Therefore, the PBF-LB/M-fabricated lean steel offers significant potential as resource-efficient material for tooling applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Grohol · 2023
2. Selective laser melting10.1002/latj.201290018 ↗
3. Laser powder bed fusion of stainless steel grades: a review10.3390/met9070731 ↗
4. Formation mechanism of non-metallic inclusions in different stainless steel grades10.2355/isijinternational.43.1191 ↗
5. Inclusions in stainless steels − A review10.1002/srin.201700130 ↗
6. Steels in additive manufacturing: a review of their microstructure and properties10.1016/j.msea.2019.138633 ↗
7. Selective laser melting of crack-free high density M2 high speed steel parts by baseplate preheating10.1115/1.4028513 ↗
8. Effect of carbon content on the processability of Fe-C alloys produced by laser based powder bed fusion10.3389/fmats.2021.800021 ↗
9. Hot work tool steel processed by laser powder bed fusion: a review on Most relevant influencing factors10.1002/adem.202170027 ↗
10. Microstructure and properties of selective laser melted high hardness tool steel10.1016/j.phpro.2013.03.157 ↗
11. Microstructure and mechanical properties of X65MoCrWV3-2 cold-work tool steel produced by selective laser melting
12. Cracking mechanism in a laser powder bed fused cold-work tool steel: the role of residual stresses, microstructure and local elemental concentrations10.1016/j.actamat.2021.117570 ↗
13. Crack-free in situ heat-treated high-alloy tool steel processed via laser powder bed fusion: microstructure and mechanical properties10.1016/j.heliyon.2022.e10171 ↗
14. Improving sustainability with simpler alloys10.1126/science.aaw9905 ↗
15. Strategies for improving the sustainability of structural metals10.1038/s41586-019-1702-5 ↗
16. Achieving exceptional wear resistance in a crack-free high-carbon tool steel fabricated by laser powder bed fusion without pre-heating10.1016/j.jmst.2023.02.012 ↗
17. Improved corrosion behavior of a novel Fe85Cr4Mo8V2C1 tool steel processed by laser powder bed fusion10.1016/j.jallcom.2021.158887 ↗
18. The effect of boron on microstructure and mechanical properties of high-strength cast FeCrVC10.1016/j.msea.2013.07.085 ↗
19. 2014
20. Dinnebier · 2019
21. Phenomenological model of anisotropic peak broadening in powder diffraction10.1107/S0021889898006001 ↗
22. The high energy materials science beamline (HEMS) at PETRA III10.4028/www.scientific.net/MSF.772.57 ↗
23. Combined texture and structure analysis of deformed limestone from time-of-flight neutron diffraction spectra10.1063/1.364220 ↗
24. The (hkl) dependence of diffraction-line broadening caused by strain and size for all laue groups in rietveld refinement10.1107/S0021889897009795 ↗
25. Warren · 1990
26. Rietveld texture analysis from synchrotron diffraction images. II. Complex multiphase materials and diamond anvil cell experiments10.1017/S0885715614000360 ↗
27. Micromechanics and microstructure evolution during in situ uniaxial tensile loading of TRIP-assisted duplex stainless steels10.1016/j.msea.2018.07.040 ↗
28. Elastic properties of Fe–C and Fe–N martensites10.2355/isijinternational.55.1512 ↗
29. Effect of cooling rate on precipitation behaviour and transformation characteristics of a novel FeCrVBC cast alloy10.1016/j.jallcom.2019.152544 ↗
30. The positions of the carbon atoms in austenite
31. Lipson · J. Iron Steel Inst. · 1944 · 149 · 123
32. Der Dreistoff: Vanadin—Chrom—Kohlenstoff10.1007/BF00902086 ↗
33. Kinetics of crystalline nucleus formation in supercooled liquid Tin1, 210.1021/ja01129a044 ↗
34. The molecular mechanism of solidification10.1016/0001-6160(64)90130-0 ↗
35. Nucleation in condensed matter: applications in materials and biology
36. Austenite grain size and the martensite-start temperature10.1016/j.scriptamat.2008.11.043 ↗
37. Influence of solidification cell structure on the martensitic transformation in additively manufactured steels
38. The role of the austenite grain size in the martensitic transformation in low carbon steels10.1016/j.matdes.2019.107625 ↗
39. Effect of grain refinement on thermal stability of metastable austenitic steel10.2320/matertrans.45.2245 ↗
40. The relationship between austenite strength and the transformation to martensite in Fe-10 pct Ni-0.6 pct C alloys10.1007/BF02646560 ↗
41. Influence of increased carbon content on the processability of high-speed steel HS6-5-3-8 by laser powder bed fusion
42. The effect of carbon content on the c/a ratio of as-quenched martensite in Fe-C alloys10.1016/j.msea.2017.05.094 ↗
43. Zum Gahr · 1987
44. Stachowiak · 2011
45. Czichos · 2015
46. Microstructure and abrasive wear behavior of a novel FeCrMoVC laser cladding alloy for high-performance tool steels10.1016/j.wear.2017.04.021 ↗
47. Microstructure and properties of FeCrMoVC tool steel produced by selective laser melting10.1016/j.matdes.2015.09.148 ↗
48. On the influence of retained austenite in the abrasive wear behaviour of a laser surface melted tool steel10.1016/j.wear.2004.09.029 ↗
49. The maximum hardness of strained surfaces and the abrasive wear of metals and alloys10.1016/0043-1648(67)90276-1 ↗
50. Friction-induced phase transformations and evolution of microstructure of austenitic stainless steel observed by operando synchrotron X-ray diffraction10.1016/j.actamat.2022.118033 ↗
51. Abrasion-induced microstructural changes during low stress abrasion of a plain carbon (0.5% C) steel10.1016/0043-1648(91)90341-Q ↗
52. Low-alloyed steel with superior dry abrasive wear resistance and mechanical properties processed via steel mold casting10.1016/j.wear.2025.205756 ↗