Strengthening mechanisms of nanoprecipitates at elevated temperature in secondary hardening steel
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Surface Treatment and Residual Stress · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Simultaneous improvement of strength and toughness via two-stage aging for a secondary hardening steel10.1016/j.msea.2024.146171 ↗
2. Effect of post weld heat treatment on the interplay of microstructure, precipitates and properties of creep-resistant 2.25Cr-1Mo-0.25V weld metal10.1016/j.msea.2022.143550 ↗
3. Estimation of die service life against plastic deformation and wear during hot forging processes
4. Microstructures and mechanical properties of spray formed H13 tool steel
5. On the 650° C thermostability of 9–12Cr heat resistant steels containing different precipitates10.1016/j.actamat.2017.05.069 ↗
6. Development and study of high-strength low-Mo fire-resistant steel10.1016/j.matdes.2011.10.055 ↗
7. Effect of heat treatment on microstructure and mechanical properties of Cr–Ni–Mo–Nb steel10.1179/174328407X192796 ↗
8. The effect of vanadium and titanium on the microstructure and properties of Nano-HT450 thermal die steel at elevated temperature
9. Influence of thermal homogenization treatment on structure and impact toughness of H13 ESR steel10.1016/S1006-706X(10)60011-8 ↗
10. 3D atom probe characterization of alloy carbides in tempering martenite I
11. Tailoring the strength and ductility of T91 steel by partial tempering treatment10.1016/j.actamat.2019.02.043 ↗
12. Precipitation behavior of carbide during heating process in Nb and Nb-Mo micro-alloyed steels
13. Effect of hot rolling process on the mechanical and microstructural property of the 9Cr–1Mo steel10.1016/j.anucene.2011.07.027 ↗
14. The use of Fourier analysis in the interpretation of X‐ray line broadening from cold‐worked iron and molybdenum10.1107/S0365110X54001879 ↗
15. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
16. Lattice-parameter variation with carbon content of martensite. 1. X-ray-diffraction experimental-study10.1103/PhysRevB.52.9970 ↗
17. Microstructure-property relationship in a low carbon Nb-B bearing ultra-high strength steel by direct-quenching and tempering10.1016/j.msea.2018.04.086 ↗
18. Tempering microstructure and mechanical properties of an ultra high strength bainitic steel
19. Room temperature microstructure and property evaluation of a heat treated fully bainitic 20CrMoVTiB410 steel10.1007/s11837-016-2063-2 ↗
20. Influence of heat input on post weld microstructure and mechanical properties of friction stir welded HSLA-65 steel10.1016/j.msea.2012.06.057 ↗
21. Strengthening mechanisms of Nb and V microalloying high strength hot-stamped steel10.1016/j.msea.2020.140115 ↗
22. Carbide precipitation in Nb-V-Ti microalloyed ultra-high strength steel during tempering10.1016/j.msea.2016.12.019 ↗
23. Carbides and mechanical properties in a Fe–Cr–Ni–Mo high-strength steel with different V contents10.1016/j.msea.2013.09.030 ↗
24. Stabilization of martensitic microstructure in advanced 9Cr steel during creep at high temperature10.1016/j.msea.2003.11.073 ↗
25. Alloy design of creep resistant 9Cr steel using a dispersion of nano-sized carbonitrides10.1016/j.ijpvp.2006.09.003 ↗
26. Stability of MX-type strengthening nanoprecipitates in ferritic steels under thermal aging, stress and ion irradiation10.1016/j.actamat.2014.03.015 ↗
27. Importance of austenitization temperature and ausforming on creep strength in 9Cr ferritic/martensitic steel10.1016/j.scriptamat.2018.04.038 ↗
28. Relationship between microstructure and creep strength in ferritic steels
29. AP-FIM study on the effect of Mo addition on microstructure in Ti-Nb steel10.1016/0169-4332(94)90351-4 ↗
30. Effect of Mo addition on strength of fire-resistant steel at elevated temperature10.1007/s11665-014-1051-3 ↗
31. The role of deformation in coarsening of M 23 C 6 carbide particles in 9% Cr Steel10.1134/S0031918X20060162 ↗
32. Experimental study of carbides in the Ti–Cr–C system10.1007/s10853-019-03810-3 ↗
33. Atom probe tomographic observation of hydrogen trapping at carbides/ferrite interfaces for a high strength steel10.1016/j.jmst.2017.11.008 ↗
34. The evolution of dislocation density during heat treatment and creep of tempered martensite ferritic steels10.1016/S1359-6454(03)00324-0 ↗
35. Effect of processing parameters on the evolution of dislocation density and sub-grain size of a 12% Cr heat resistant steel during creep at 650° C10.1016/j.msea.2010.10.028 ↗
36. Yong · 2006
37. High strength-superplasticity combination of ultrafine-grained ferritic steel: the significant role of nanoscale carbides10.1016/j.jmst.2020.11.078 ↗
38. Effect of grain boundary segregation of interstitial elements on Hall–Petch coefficient in steels10.2320/matertrans.MA201314 ↗
39. Characterization of the microstructures and mechanical properties of 25CrMo48V martensitic steel tempered at different times10.1016/j.msea.2012.08.049 ↗
40. Measurement of size distribution and volume fraction of precipitates in silicon steel
41. Nanoscale cementite precipitates and comprehensive strengthening mechanism of steel10.1007/s11661-011-0767-z ↗
42. Precipitation hardening in metals10.1179/026708399773002782 ↗
43. Microstructure and high-temperature tensile behavior of modified H13 steel with the addition of tungsten, molybdenum, and lowering of chromium10.1016/j.msea.2023.144655 ↗