journal article·2024-08Open access

Gaining understanding of the effect of alloy composition on the properties of Ti–Cu–Mn–Al alloys

M. Al-hajiri, Y. Alshammari, F. Yang, L. Bolzoni

Abstract

High performance cheaper Ti alloys can be developed based on the addition of several alloying elements, amongst which are Cu, Mn and Al. Studies are available in literature about binary and some ternary alloys based on the addition of these elements; however, no quaternary Ti–Cu–Mn–Al alloys were developed. Therefore, in this study quaternary Ti–Cu–Mn–Al alloys were manufactured via powder metallurgy to gain a better understanding of the effect of the alloy composition and the achievable mechanical performance. It is found that the selected quaternary Ti–Cu–Mn–Al alloys are characterised by a lamellar structure, which is progressively refined as the amount of alloying elements increases, and precipitation of the Ti 2 Cu intermetallic occurs if the Cu content is high enough. The amount of residual porosity increases and changes morphology as more thermal energy is invested in the diffusion of the alloying elements. In terms of mechanical behaviour, the quaternary Ti–Cu–Mn–Al alloys undergo both elastic and plastic deformation upon tensile loading. Strength and hardness linearly increase and the ductility monotonically decreases, which is the result of the compromise between the amount of residual porosity and the several strengthening mechanisms brought about by the actual total amount of alloying elements added.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced Welding Techniques Analysis · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Biocompatibility of antibacterial Ti-Cu sintered alloy: in Vivo bone Response10.1007/s10856-015-5600-6 ↗
2. Evaluation of reactive induction sintering as a manufacturing Route for blended elemental Ti-5Al-2.5Fe alloy10.1016/j.jmatprotec.2018.01.013 ↗
3. Sintering Trajectories: Description on how density, surface Area, and grain size change10.1007/s11837-015-1795-8 ↗
4. Advancement in the pressureless sintering of CP titanium using high-frequency induction heating10.1007/s11661-019-05381-z ↗
5. Mechanical properties and microstructures of cast Ti-Cu alloys10.1016/S0109-5641(02)00027-1 ↗
6. Effect of the existing form of Cu element on the mechanical properties, bio-corrosion and antibacterial properties of Ti-Cu alloys for biomedical application10.1016/j.msec.2016.08.033 ↗
7. Antibacterial Ti-Cu alloy with enhanced mechanical properties as implant applications10.1088/2053-1591/abc371 ↗
8. Optimization of mechanical properties, biocorrosion properties and antibacterial properties of as-cast Ti-Cu alloys10.1088/1748-6041/11/6/065001 ↗
9. Effect of extrusion processing on the microstructure, mechanical properties, biocorrosion properties and antibacterial properties of Ti-Cu sintered alloys10.1016/j.msec.2016.07.051 ↗
10. Effect of Cu content on the antibacterial activity of titanium-copper sintered alloys10.1016/j.msec.2013.11.028 ↗
11. Thixoforming of titanium: the microstructure and processability of semisolid Ti-Cu-Fe alloys10.1016/j.vacuum.2020.109567 ↗
12. A comparison of the microstructures, thermal and mechanical properties of pressed and sintered Ti-Cu, Ti-Ni and Ti-Cu-Ni alloys intended for dental applications10.1016/j.jallcom.2020.156494 ↗
13. Effect of Mn-content on the deformation behavior of binary Ti-Mn alloys10.4028/www.scientific.net/KEM.705.214 ↗
14. Mechanical properties, microstructures, and biocompatibility of low-cost β-type Ti-Mn alloys for biomedical applications
15. The effect of deficiencies of manganese and copper on osteoinduction and on resorption of bone particles in rats10.1007/BF02563794 ↗
16. Sigel · 2000
17. Effect of manganese on the microstructure, mechanical properties and corrosion behavior of titanium alloys10.1016/j.matchemphys.2016.06.016 ↗
18. Fabrication of low-cost beta-type Ti-Mn alloys for biomedical applications by metal injection molding process and their mechanical properties10.1016/j.jmbbm.2016.02.035 ↗
19. Improvement of microstructure, mechanical and corrosion properties of biomedical Ti-Mn alloys by Mo addition10.1016/j.matdes.2016.07.115 ↗
20. A new kind of biomedical Ti-Mn-Nb alloy
21. Basic characterization of new Ti-Mn-Zr alloys
22. Recent development of effect mechanism of alloying elements in titanium alloy design10.1016/S1875-5372(14)60082-5 ↗
23. Effect of order in Ti3Al particles and of temperature on the deformation behavior of age-hardened Ti-Al alloys10.1016/0025-5416(77)90169-0 ↗
24. Nanoscale strain characterization of Ti3Al precipitate-reinforced Ti alloys10.1016/j.matlet.2017.08.005 ↗
25. Ternary Ti alloys functionalised with antibacterial activity10.1038/s41598-020-79192-3 ↗
26. Antibacterial Ti-Mn-Cu alloys for biomedical applications10.1093/rb/rbaa050 ↗
27. Microstructure and properties of burn-resistant Ti-Al-Cu alloys10.1023/A:1004873501005 ↗
28. Properties characterization of cast Ti-Al-Cu alloys for dental applications, medical device materials IV
29. Development of Cu-bearing powder metallurgy Ti alloys for biomedical applications10.1016/j.jmbbm.2019.05.014 ↗
30. Fabrication of Ti-Al-Cu new alloys by inductive sintering, characterization, and corrosion evaluation10.1016/j.jmrt.2019.07.040 ↗
31. Changes in Ti-Al-Mn alloy compositions during their smelting in a vacuum induction furnace
32. Effect of Mn on the properties of powder metallurgy Ti-2.5Al-xMn alloys10.3390/ma16144917 ↗
33. Superplastic deformation behaviour and microstructure evolution of near-α Ti-Al-Mn alloy10.1016/j.msea.2017.10.017 ↗
34. Effect of microstructural features on the fracture toughness of a welded alpha-beta Ti-Al-Mn alloy10.1016/S0013-7944(97)00075-1 ↗
35. Molchanova · 1965 · 154
36. The ω phase transformation during the low temperature aging and low rate heating process of metastable β titanium alloys10.1016/j.matchemphys.2019.122125 ↗
37. Structural stabilities of β-Ti alloys studied using a new Mo equivalent derived from [β/(α + β)] phase-boundary slopes10.1007/s11661-015-2923-3 ↗
38. State of the art in beta titanium alloys for airframe applications10.1007/s11837-015-1442-4 ↗
39. Effect of Fe addition on properties of Ti-6Al-xFe manufactured by blended elemental process10.1016/j.jmbbm.2019.103518 ↗
40. Oxidation and corrosion behavior of new low-cost Ti-7Fe-3Al and Ti-7Fe-5Cr alloys from titanium hydride powders10.3390/met10020254 ↗
41. Mechanical properties and grindability of dental cast Ti-Nb alloys10.4012/dmj.22.328 ↗
42. The effect of α+ β forging on the mechanical properties and microstructure of binary titanium alloys produced via a cost-effective powder metallurgy route
43. Powder metallurgy strategies to improve properties and processing of titanium alloys: a review10.1002/adem.201600743 ↗
44. Murray · 1987
45. Mechanical behaviour of induction sintered blended elemental powder metallurgy Ti alloys
46. Engineering the heterogeneous nuclei in Al-Si alloys for solidification control10.1016/j.apmt.2016.11.001 ↗
47. The effect of copper content on the mechanical and tribological properties of hypo-, hyper-and eutectoid Ti-Cu alloys10.3390/ma13153411 ↗
48. Physics and phenomenology of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
49. On the use of considere's criterion in tensile testing of materials which accumulate internal damage10.1016/S1359-6462(99)00159-1 ↗
50. Fabrication and characterisation of low-cost powder metallurgy Ti-xCu-2.5Al alloys produced for biomedical applications10.1016/j.jmbbm.2021.105022 ↗
51. Effects of composition and heat treatment on the mechanical behavior of Ti-Cu alloys10.1016/j.matdes.2013.10.050 ↗