In-situ synchrotron diffraction analysis of deformation mechanisms in an AA5083 sheet metal processed by modified equal-channel angular pressing
Source abstract
Abstract
Severe plastic deformation (SPD) is a process to significantly improve the mechanical properties of materials by grain refinement. For forming at room temperature (RT), higher strengths can thus be achieved; for increased temperatures (HT), greater elongations can be achieved. This great potential has been chiefly applied only on laboratory scale due to a lack of industrial process design. Equal-channel angular pressing (ECAP) offers the possibility to integrate these advantages in industrial processes. This paper investigates a modified ECAP process for aluminum AA5083 sheet metal. Two passes of ECAP for sheet metal and an additional heat treatment were used. To study the material deformation on a micro-scale, in-situ synchrotron measurements at DESY (Hamburg) were performed to analyze the evolution of lattice strains and dislocation densities during tensile testing. The mechanical properties of the ECAP-processed sheet material reveal an increase in yield strength and a decrease in elongation at RT. Higher strains can be measured for the processed material at elevated test temperatures. In-situ diffraction results show a changed behavior of the ECAP sheet material compared to the reference material for both temperature regimes. These changes are based on the increased defect density in the material, which leads to increased strength at RT. At HT, dynamic recrystallization occurs during tensile testing, and the prevailing deformation mechanisms reconfigure. Electron backscatter diffraction (EBSD) and micrographs are used to interpret and supplement the observations. The findings provide the basis for the in-depth understanding of the deformation behavior of the material and help to apply the ECAP process on an industrial scale.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Metal forming techniques for lightweight construction10.1016/j.jmatprotec.2006.04.085 ↗
2. Lightweight construction for electric mobility using aluminium
3. Severe plastic deformation (SPD) processes for metals10.1016/j.cirp.2008.09.005 ↗
4. Segal · 1977
5. Processing by severe plastic deformation: historical developments and current impact
6. The use of severe plastic deformation techniques in grain refinement10.1007/s11837-004-0295-z ↗
7. High Strength AA7050 Al alloy processed by ECAP: microstructure and mechanical properties10.1016/j.msea.2011.04.007 ↗
8. Correlation between hydrogen storage properties and textures induced in magnesium through ECAP and cold rolling10.1016/j.ijhydene.2013.12.154 ↗
9. Prediction of generation of high- and low-angle grain boundaries (HAGB and LAGB) during severe plastic deformation10.1007/s11661-020-05873-3 ↗
10. Effect of a duplex grain size on the tensile ductility of an ultra-fine grained Al–Mg alloy, AA5754, produced by asymmetric rolling and annealing10.1016/j.scriptamat.2004.02.021 ↗
11. Microstructures and mechanical properties of ECAP 5083 Al Alloy10.2320/matertrans.42.1074 ↗
12. Paradox of strength and ductility in metals processed by severe plastic deformation10.1557/JMR.2002.0002 ↗
13. Current issues in recrystallization: a review10.1016/S1369-7021(98)80046-1 ↗
14. A review of microstructural evolution and modelling of aluminium alloys under hot forming conditions10.3390/met10111516 ↗
15. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
16. Deformation mechanisms during low-and high-temperature superplasticity in 5083 Al-Mg alloy10.1007/s11661-002-0062-0 ↗
17. Superplasticity in the aluminium–zinc eutectoid10.1179/msc.1969.3.1.1 ↗
18. Steady‐state creep of crystals10.1063/1.1722604 ↗
19. Superplasticity-recent advances and future dircetions10.1016/0079-6425(89)90004-2 ↗
20. Principles of superplasticity in ultrafine-grained materials10.1007/s10853-006-0954-2 ↗
21. Ultrafine-grained plates of Al-Mg-Si alloy obtained by incremental equal Channel Angular pressing: microstructure and mechanical properties10.1007/s11661-017-4258-8 ↗
22. Equal-channel angular sheet extrusion of interstitial-free (IF) steel: microstructural evolution and mechanical properties10.1016/j.msea.2011.05.014 ↗
23. Equal channel angular drawing of aluminium sheet10.1016/j.msea.2006.04.007 ↗
24. Enhanced mechanical behavior and reduced mechanical anisotropy of AZ31 Mg alloy sheet processed by ECAP10.1016/j.msea.2015.09.058 ↗
25. Numerical and experimental study on ECAP-processing parameters for efficient grain refinement of AA5083 sheet metal10.4028/www.scientific.net/KEM.794.315 ↗
26. Establishing Equal-Channel Angular Pressing (ECAP) for sheet metals by using backpressure: manufacturing of high-strength aluminum AA5083 sheets10.1007/s00170-023-11692-8 ↗
27. In-situ analysis of the thermoelastic effect and its relation to the onset of yielding of low carbon steel10.1016/j.matdes.2022.110753 ↗
28. Hot tensile behavior of superplastic and commercial AA5083 sheets at high temperature and strain rate10.4028/www.scientific.net/KEM.554-557.63 ↗
29. The process of grain refinement in Equal-Channel Angular pressing10.1016/S1359-6454(97)00494-1 ↗
30. 50125 · 2004
31. Thermal stability of SPD-processed aluminum alloys - internal friction as an indication for recovery, recrystallization and abnormal grain growth10.1016/j.jmrt.2022.01.149 ↗
32. Effect of Equal-Channel Angular pressing and targeted heat treatment on aluminum AA7075 sheet metal
33. Mueller · 1999
34. Rotatable multifunctional load frames for neutron diffractometers at FRM II—design, specifications and applications10.1016/j.nima.2013.01.049 ↗
35. FIT2D a multi-purpose data reduction, analysis and visualization program10.1107/S1600576716000455 ↗
36. The reflection of X-rays by crystals10.1098/rspa.1913.0040 ↗
37. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-scherrer spectrum10.1080/14786435608238074 ↗
38. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
39. Estimation of lattice strain in ZnO nanoparticles: X-ray peak profile analysis10.1007/s40094-014-0141-9 ↗
40. The “state of the art” of the diffraction analysis of crystallite size and lattice strain10.1524/zkri.2008.1213 ↗
41. Microstructure and mechanical properties variations of pure aluminum subjected to one pass of ECAP-Conform process10.1016/j.msea.2019.01.058 ↗
42. Pecharsky · 2003
43. Sur un Phénomène Observé lors de L'essai de Traction d'Alliages en Cours de Transformation
44. Facing the issues of sheet metal equal‐Channel Angular pressing: a modified approach using stacks to produce ultrafine‐grained high ductility AA5083 sheets
45. The conflicts between strength and toughness10.1038/nmat3115 ↗
46. In-situ analysis of the elastic-plastic characteristics of high strength dual-phase steel
47. Dislocation density evolution of AA 7020-T6 investigated by in-situ synchrotron diffraction under tensile load10.1016/j.matchar.2015.09.004 ↗
48. Theory of the effect of dynamic strain aging on mechanical properties10.1002/pssa.2210300120 ↗
49. Effect of Mg addition on microstructure and mechanical properties of aluminum10.1016/j.msea.2004.03.076 ↗
50. Mechanical behavior, deformation mechanism and microstructure evolutions of ultrafine-grained Al during recovery via annealing
51. Low-temperature superplastic behavior of a submicrometer-grained 5083 Al alloy fabricated by severe plastic deformation10.1007/s11661-002-0271-6 ↗
52. Failure mechanisms in superplastic AA5083 materials10.1007/s11661-006-0036-8 ↗
53. Shear fracture mechanism in micro-tension of an ultrafine-grained pure copper using synchrotron radiation X-ray tomography10.1016/j.scriptamat.2017.01.021 ↗
54. High resolution surface studies of superplastic deformation in shear and tension10.1002/mawe.200800291 ↗