journal article·2025-11Open access

Elucidating the effect of sintering time on the process-structure-property relationship of Inconel 625 produced by metal extrusion additive manufacturing

Y.N. Aditya, Sahil Rohila, Sajad Hosseinimehr, David Ester, Michael J. Benoit

Abstract

Inconel 625 (IN625), a Ni-based superalloy valued for its strength and corrosion resistance, is known to suffer from microcracking during fusion-based additive manufacturing. Metal Extrusion Additive Manufacturing (MEAM) offers a solid-state alternative that eliminates solidification, thereby reducing the risk of microcracking. However, there is currently a lack of understanding between the interrelationship of process conditions, microstructure, and mechanical properties for IN625 produced by MEAM. This study investigates the influence of sintering time, 5 min (short time) versus 4 h (long time) at 1290 °C, on the densification, microstructure, and mechanical performance of MEAM-processed IN 625. The 4 h sintered sample achieved a higher relative density (99.5 %) compared to the 5 min sample (98.5 %), and both developed (Nb + Mo) rich carbides with distinct morphologies and volume fractions. Extended sintering reduced residual porosity, resulting in improved tensile strength and elongation. Fractographic analysis confirmed ductile failure via microvoid coalescence in both cases. These findings underscore the critical role of sintering duration in optimising density; despite developing microstructure characteristics that should degrade mechanical properties at longer sintering times, the mechanical properties of the 4 h sample were superior to those of the 5 min sample, revealing reduction of porosity to be the critical mechanism for maximising mechanical properties for this alloy and process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (86)

Show source-provided references
1. Kwabena Adomako · 2022
2. Influence of powder characteristics and additive manufacturing process parameters on the microstructure and mechanical behaviour of inconel 625 fabricated by selective laser melting
3. Precipitation kinetics and morphology of grain boundary carbides in Ni-Base superalloy haynes 28210.1007/s11661-020-06019-1 ↗
4. Effect of post-processes on the microstructure and mechanical properties of laser powder bed fused IN718 superalloy
5. Determining volume fractions of γ, γ′, γ″, δ, and MC-carbide phases in inconel 718 as a function of its processing history using an advanced neutron diffraction procedure
6. Selvaraj · 2021
7. Machinability of nickel based superalloys: a review10.1016/j.matpr.2017.02.266 ↗
8. Microstructure and mechanical properties of additive manufactured inconel 718 alloy strengthened by oxide dispersion with 0.3 wt% Sc addition
9. Selective laser melting of inconel 625 alloy with reduced defect formation10.2351/7.0000093 ↗
10. Effect of alloy composition and laser powder bed fusion parameters on the defect formation and mechanical properties of inconel 62510.1007/s00170-021-06957-z ↗
11. Material extrusion additive manufacturing of low-viscosity metallic feedstocks: performances of the plunger-based approach
12. Metal injection moulding of CP-Ti components for biomedical applications10.1016/j.jmatprotec.2012.03.001 ↗
13. Additive manufacturing of 17–4 PH steel using metal injection molding feedstock: analysis of 3D extrusion printing, debinding and sintering
14. Tensile performance and plastic anisotropy of material extrusion steel 316L: influence of primary manufacturing parameters
15. 1 - thermodynamics of sintering10.1533/9781845699949.1.3 ↗
16. Defect evolution and mitigation in metal extrusion additive manufacturing: from deposition to sintering
17. Effects of fused filament fabrication parameters on the manufacturing of 316L stainless-steel components: geometric and mechanical properties10.1108/RPJ-01-2022-0023 ↗
18. Density and shrinkage evaluation of AISI 316L parts printed via FDM process10.1080/10426914.2021.1905830 ↗
19. Optimization of the 3D printing parameters for tensile properties of specimens produced by fused filament fabrication of 17-4PH stainless steel10.3390/ma13030774 ↗
20. A comparative analysis between material extrusion and other additive manufacturing techniques: defects, microstructure and corrosion behavior in nickel alloy 625
21. Advanced metal transfer additive manufacturing of high temperature turbine blades10.1007/s00170-022-09176-2 ↗
22. Additive manufacturing of 17–4 PH steel using metal injection molding feedstock: analysis of 3D extrusion printing, debinding and sintering
23. Dimensional accuracy and mechanical characterization of inconel 625 components in atomic diffusion additive manufacturing10.3390/applmech5020022 ↗
24. Metal fused filament fabrication of the nickel-base superalloy IN 71810.1007/s10853-022-06937-y ↗
25. Influence of the iron content on the microstructure and electrochemical behavior of as-cast modified inconel 62510.1016/j.corsci.2021.109892 ↗
26. Effect of Nb content on microstructure and corrosion resistance of inconel 625 coating formed by laser cladding
27. Application of finite element, phase-field, and CALPHAD-based methods to additive manufacturing of Ni-based superalloys10.1016/j.actamat.2017.05.003 ↗
28. Evolution of microtexture and microstructure during sintering of copper10.1007/s11661-019-05317-7 ↗
29. Microstructure, microtexture and grain boundary character evolution in microwave sintered copper
30. Haines · 2022
31. Toward a better understanding of phase transformations in additive manufacturing of Alloy 71810.1016/j.mtla.2020.100862 ↗
32. Carbide precipitation in nickel base superalloys 718 and 625 and their effect on mechanical properties
33. Effect of recrystallization annealing on microstructure and tensile properties of inconel 617B alloy cold rolled pipes
34. Deformation twinning and the role of stacking fault energy during cryogenic testing of Ni-based superalloy 625
35. The distribution of grain boundary planes in interstitial free steel10.1007/s11661-012-1393-0 ↗
36. Effect of twin boundaries on the microstructure and mechanical properties of inconel 625 alloy
37. A first report on sintering diagrams10.1016/0001-6160(74)90167-9 ↗
38. Chen · 2015 · 1
39. In situ investigation of the fracture of primary carbides and its mechanism in M50 steel
40. Study on deviation distribution of Σ3 and Σ9 boundaries in hastelloy C-276 superalloy with different hot rolling reductions10.1016/j.jmrt.2023.03.107 ↗
41. Twinning-related grain boundary engineering10.1016/j.actamat.2004.05.031 ↗
42. The role of ∑9 boundaries in grain boundary engineering
43. Evolution of site-specific solidification microstructure and texture during additive manufacturing of stainless steel 316L by laser powder bed fusion10.1016/j.matchar.2025.114971 ↗
44. Non-equilibrium microstructure, crystallographic texture and morphological texture synergistically result in unusual mechanical properties of 3D printed 316L stainless steel
45. Effect of samarium doping on the structural, optical and magnetic properties of sol–gel processed BiFeO3 thin films
46. Compressive stress for large-pore removal in sintering10.1111/j.1151-2916.1988.tb07518.x ↗
47. An improved process for solving the sintering problem of Al-Si alloy powder metallurgy10.3390/met14111295 ↗
48. Hall-petch strengthening by grain boundaries and annealing twin boundaries in non-equiatomic Ni2FeCr medium entropy alloy10.3390/met13010134 ↗
49. Effects of solution treatments on the microstructure and mechanical properties of inconel 625 fabricated by electron beam freeform fabrication10.1016/j.msea.2024.146637 ↗
50. Modeling solid solution strengthening in nickel alloys10.1007/s11661-997-0268-2 ↗
51. Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - mechanical machining case10.1016/j.actamat.2019.08.059 ↗
52. Microstructural evolution and strengthening mechanisms of inconel 718 alloy with different W addition fabricated by laser cladding10.1016/j.msea.2022.144535 ↗
53. Cyclic plasticity and dislocation structures
54. The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silver
55. Microstructure and mechanical properties of Y2O3 strengthened inconel 625 alloy fabricated by selective laser melting10.1016/j.msea.2022.143813 ↗
56. Interfacial nanophases stabilize nanotwins in high-entropy alloys10.1016/j.actamat.2019.12.010 ↗
57. Microstructure evolution characteristics of inconel 625 alloy from selective laser melting to heat treatment10.1016/j.msea.2017.08.058 ↗
58. Additive manufactured high entropy alloys: a review of the microstructure and properties
59. Optimized heat treatment for electron beam powder bed fusion processed IN718: correlating microstructure, texture, and mechanical properties10.1002/adem.202401905 ↗
60. Microstructures and mechanical behavior of inconel 625 fabricated by solid-state additive manufacturing10.1016/j.msea.2017.03.105 ↗
61. A critical review on the performance and microstructural characteristics of materials fabricated through friction stir additive methods and deposition techniques10.1016/j.jmrt.2024.11.094 ↗
62. Influence of heat treatments on microstructure evolution and mechanical properties of inconel 625 processed by laser powder bed fusion10.1016/j.msea.2018.05.044 ↗
63. Microstructural characteristics and mechanical properties of carbon nanotube reinforced inconel 625 parts fabricated by selective laser melting10.1016/j.matdes.2016.09.080 ↗
64. Comparison of microstructure features and mechanical properties for additive manufactured and wrought nickel alloys 625
65. Interlaboratory study for nickel alloy 625 made by laser powder bed fusion to quantify mechanical property variability10.1007/s11665-016-2169-2 ↗
66. Analysis of as-built microstructures and recrystallization phenomena on inconel 625 alloy obtained via laser powder bed fusion (L-pbf)10.3390/met11040619 ↗
67. Investigation on the tensile and compressional behavior of inconel 625 fabricated through laser powder bed fusion10.1007/s11665-021-05672-w ↗
68. Laser metal deposition of inconel 625: microstructure and mechanical properties10.2351/1.4757717 ↗
69. Effect of solution temperature on static recrystallization and ductility of inconel 625 superalloy fabricated by directed energy deposition
70. Effect of process parameter and scanning strategy on the microstructure and mechanical properties of inconel 625 superalloy manufactured by laser direct energy deposition10.3365/KJMM.2023.61.10.772 ↗
71. Free-form laser consolidation for producing metallurgically sound and functional components10.2351/1.521927 ↗
72. Fatigue and fracture toughness characteristics of laser rapid manufactured inconel 625 structures10.1016/j.msea.2010.08.034 ↗
73. Microstructural architecture, microstructures, and mechanical properties for a nickel-base superalloy fabricated by electron beam melting
74. Effect of layer thickness and heat treatment on microstructure and mechanical properties of alloy 625 manufactured by electron beam powder bed fusion10.3390/ma15217767 ↗
75. Characterization of inconel 625 fabricated using powder-bed-based additive manufacturing technologies10.1016/j.jmatprotec.2018.08.031 ↗
76. Comparison of microstructures and properties for a Ni-Base superalloy (alloy 625) fabricated by electron beam melting
77. Mechanical properties of friction-stir-welded inconel 625 alloy10.2320/matertrans.M2009200 ↗
78. Thermo-mechanical process variables driven microstructure evolution during additive friction stir deposition of IN625
79. Microstructure, mechanical and corrosion study of friction stir processed inconel 625 additive layers deposited via wire arc direct energy deposition
80. Polycrystalline cast superalloys
81. Wrought and P/M superalloys
82. Improving the deposition efficiency and mechanical properties of additive manufactured inconel 625 through hot wire laser metal deposition10.1016/j.jmatprotec.2023.118175 ↗
83. Powder bed binder jet printed alloy 625: densification, microstructure and mechanical properties10.1016/j.matdes.2016.06.067 ↗
84. 2023
85. “Desktop metal
86. “Markforged