Effects of β phase and initial dislocation density on dwell fatigue deformation and crack initiation mechanism in Ti-5Al-2Fe-3Mo alloy
Source abstract
Abstract
Dwell fatigue deformation and crack initiation were investigated for the Ti-5Al-2Fe-3Mo (mass%) alloy with equiaxed α and β grains. Two materials were heated in the α+β region and either air cooled (AC) or water quenched (WQ), leading to dfferent dislocations densities and microstructures. Dislocation densities were comparable in the α phase but increased in the β phase due to dwell fatigue. Geometrically necessary dislocations were uniformly distributed with high density in β grains but were absent in α grains. Work hardening in the β phase may reduce plastic strain accumulation during dwell fatigue. High initial dislocation density in the β phase impeded slip transfer across β grains, thereby minimizing plastic strain accumulation. A higher β volume fraction and initial dislocation density may reduce dwell sensitivity. In the WQ, cracks initiated on the { 10 1 ‾ 0 } facet nearly perpendicular to the loading axis, with microcracks in β grains potentially propagating to the { 10 1 ‾ 0 } plane in the adjacent α grains. In the AC, cracks initiated near the (0001) facet inclined at approximately 45°, likely originating at the basal twist boundary between neighboring α grains due to suppressed microcracking in β grains. The higher initial dislocation density in the β phase of the AC compared to the WQ may have suppressed microcrack initiation in β grains of the AC. Thus, different initial dislocation densities in the β phase influenced the crack initiation sites. • The influence of β phase on dwell fatigue deformation and crack initiation were analyzed for an α+β type titanium alloy. • The dislocation density increase in the β phase was mainly caused by the dislocation cutting within the β grains. • The higher initial dislocation density in the β phase may suppress microcrack initiation in the β grains. • Higher β volume fraction and initial dislocation density in the β phase are beneficial for reducing dwell sensitivity.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. An overview on the use of titanium in the aerospace industry10.1016/0921-5093(96)10233-1 ↗
2. A review of dwell sensitive fatigue in titanium alloys: the role of microstructure, texture and operating conditions10.1016/S0142-1123(03)00145-2 ↗
3. Observations on the faceted initiation site in the dwell-fatigue tested Ti-6242 alloy: crystallographic orientation and size effects10.1007/s11661-006-0095-x ↗
4. Crystallography of fracture facets in a near-alpha titanium alloy10.1007/s11661-006-0144-5 ↗
5. Deformation and creep modeling in polycrystalline Ti-6Al alloys10.1016/S1359-6454(03)00289-1 ↗
6. Lengthscale-dependent, elastically anisotropic, physically-based hcp crystal plasticity: application to cold-dwell fatigue in Ti alloys10.1016/j.ijplas.2006.10.013 ↗
7. Discrete dislocation and crystal plasticity analyses of load shedding in polycrystalline titanium alloys10.1016/j.ijplas.2016.08.009 ↗
8. Determination of Ti-6242 α and β slip properties using micro-pillar test and computational crystal plasticity10.1016/j.jmps.2016.06.007 ↗
9. The role of β-titanium ligaments in the deformation of dual phase titanium alloys10.1016/j.msea.2019.01.032 ↗
10. The effect of the beta phase on the micromechanical response of dual-phase titanium alloys10.1016/j.ijfatigue.2017.03.020 ↗
11. Understanding thermal alleviation in cold dwell fatigue in titanium alloys10.1016/j.ijplas.2018.07.018 ↗
12. On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium10.1016/S0031-8914(34)80244-3 ↗
13. Modeling Ti–6Al–4V using crystal plasticity, calibrated with multi-scale experiments, to understand the effect of the orientation and morphology of the α and β phases on time dependent cyclic loading10.1016/j.jmps.2020.104192 ↗
14. Influence of dispersed β phase on local deformation pattern in mill-annealed Ti-Fe-O alloy under dwell fatigue loading10.1016/j.ijfatigue.2021.106447 ↗
15. A comparative study on dwell fatigue of Ti-6Al-2Sn-4Zr-xMo (x = 2 to 6) alloys on a microstructure-normalized basis10.1007/s11661-014-2541-5 ↗
16. Quantifying the dislocation structures of additively manufactured Ti–6Al–4V alloys using X-ray diffraction line profile analysis
17. The effect of cooling rates on the microstructure and mechanical properties of thermo-mechanically processed Ti–Al–Mo–V–Cr–Fe alloys10.1016/j.msea.2013.03.083 ↗
18. Titanium alloys developed by nippon steel & sumitomo metal corporation
19. High resolution electron backscatter diffraction measurements of elastic strain variations in the presence of larger lattice rotations10.1016/j.ultramic.2012.01.004 ↗
20. On solving the orientation gradient dependency of high angular resolution EBSD10.1016/j.ultramic.2011.10.013 ↗
21. Measurement of residual elastic strain and lattice rotations with high resolution electron backscatter diffraction10.1016/j.ultramic.2011.05.007 ↗
22. Fractographical analyses of crack initiation site in high-cycle fatigue for Ti–Fe–O Alloy at low temperature10.2355/isijinternational.ISIJINT-2017-673 ↗
23. Global optimum of microstructure parameters in the CMWP line-profile-analysis method by combining Marquardt-Levenberg and Monte-Carlo procedures10.1016/j.jmst.2019.01.014 ↗
24. Contrast factors of dislocations in the hexagonal crystal system10.1107/S0021889802009536 ↗
25. Grain to grain slip activity in plastically deformed Zr determined by X-ray micro-diffraction line profile analysis10.1016/j.actamat.2006.09.031 ↗
26. Deconvolution of the instrumental functions in powder X-ray diffractometry10.1107/S0021889801018945 ↗
27. LMFIT: Non-Linear Least-Squares Minimization and Curve-Fitting for Python, https://lmfit.github.io/lmfit-py/.
28. Dwell-sensitive fatigue under biaxial loads in the near-alpha titanium alloy IMI68510.1016/0142-1123(94)90194-5 ↗
29. Analysis of subsurface fatigue crack generation in Ti–Fe–O alloy at low temperature10.2355/isijinternational.ISIJINT-2017-514 ↗
30. Effects of crystallographic texture on subsurface fatigue crack generation in Ti-Fe-O alloy at low temperature10.2355/isijinternational.ISIJINT-2021-381 ↗
31. Compatibility of deformation in two-phase Ti-Al alloys: dependence on microstructure and orientation relationships10.1007/BF02670762 ↗
32. Deformation behavior of HCP Ti-Al alloy single crystals10.1007/s11661-002-0153-y ↗
33. In-situ investigation on tensile deformation and fracture behaviors of a new metastable β titanium alloy10.1016/j.msea.2020.140187 ↗
34. Effect of alloying elements in hot-rolled metastable β-titanium alloys. Part II: mechanical properties10.1007/s11661-016-3508-5 ↗
35. Intragranular deformation mechanisms during ambient-temperature creep in hexagonal close-packed metals10.2320/matertrans.M2009224 ↗
36. Presences of primary creep in various phase metals and alloys at ambient temperature10.1016/j.msea.2004.01.146 ↗
37. Strain localization and fatigue crack formation at (0001) twist boundaries in titanium alloys10.1016/j.actamat.2021.117227 ↗