journal article·2024-07Open access

How alloying and processing effects can influence the microstructure and mechanical properties of directly extruded thin zinc wires

Maria Nienaber, Sophie Bramkamp, Noomane Ben Khalifa, Jan Bohlen

Abstract

Zinc (Zn) in particular has gained attention as biodegradable metal due to its advantageous corrosion rates compared to magnesium (Mg) or iron (Fe). Still, strength and ductility of zinc are found to be unfavorable for many medical applications. Strategies to overcome such issues base on a distinct grain refinement of the respective product. One important condition of the metal is assumed to be in the form of wires, which in the present work stem from a direct extrusion setup and high degrees of deformation, therefore a hot forming procedure as the underlying thermomechanical treatment. A basic binary alloying approach with Mg, manganese (Mn) and copper (Cu) is applied, limiting the content to a solid solution range of the alloys. The processability and the processing ranges are examined as well as their impact on the microstructure development and the resulting mechanical behavior. Higher extrusion speed leads to inhomogeneous material flow during extrusion. Alloying Zn can reduce the influence of process parameters and decrease the average grain sizes of wires which experienced lower temperature impact. The forming ability of pure Zn and ZnMg-alloy remain limited whereas they appear more beneficial for the alloys with Mn and especially Cu.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Biodegradable metals for cardiovascular stents: from clinical concerns to recent Zn-alloys10.1002/adhm.201501019 ↗
2. The influence of alloying and fabrication techniques on the mechanical properties, biodegradability and biocompatibility of zinc: a comprehensive review10.1016/j.actbio.2019.01.035 ↗
3. A comprehensive review of the current research status of biodegradable zinc alloys and composites for biomedical applications10.3390/ma16134797 ↗
4. Biodegradable metallic wires in dental and orthopedic applications: a review10.3390/met8040212 ↗
5. Metallic biomaterials: current challenges and opportunities10.3390/ma10080884 ↗
6. Biodegradable metals10.1016/j.mser.2014.01.001 ↗
7. Improved cytotoxicity testing of magnesium materials10.1016/j.mseb.2011.04.008 ↗
8. Mechanical properties, crystallographic texture, and in vitro bio-corrosion of low-alloyed Zn–Mg, produced by hot and cold drawing for biodegradable surgical wires10.1007/s43452-021-00311-6 ↗
9. Recent research and progress of biodegradable zinc alloys and composites for biomedical applications: biomechanical and biocorrosion perspectives
10. Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation10.1016/j.actbio.2011.05.008 ↗
11. Casting with zinc-alloys
12. Microstructure, texture and mechanical properties of Mg-3.0Zn-0.2Ca alloys fabricated by extrusion at various temperatures10.1016/j.jallcom.2015.08.215 ↗
13. Effects of extrusion temperature on microstructure, mechanical properties and in vitro degradation behavior of biodegradable Zn-3Cu-0.5Fe alloy10.1016/j.msec.2019.110106 ↗
14. Zinc exhibits ideal physiological corrosion behavior for bioabsorbable stents10.1002/adma.201300226 ↗
15. Slip, twinning, and fracture in hexagonal close-packed metals10.1007/BF02648537 ↗
16. Effect of crystal orientation on indentation-induced deformation behavior of zinc10.1016/j.msea.2020.139064 ↗
17. Flow softening, twinning and dynamic recrystallization in AZ31 magnesium10.1016/j.msea.2013.06.074 ↗
18. Dynamic recrystallization of a wrought magnesium alloy: grain size and texture maps and their application for mechanical behavior predictions
19. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
20. The cleavage strength of polycrystals
21. The influence of strain rate and annealing heat treatments on the corrosion and mechanical properties of WE43 and Zn7Ag biodegradable wires for application in soft tissue reconstructions
22. Microstructure and texture development in hydrostatically extruded Mg-Al-Zn alloys during tensile testing at intermediate temperatures10.1016/j.actamat.2012.12.039 ↗
23. Tensile elongation (110%) observed in ultrafine-grained Zn at room temperature10.1063/1.1494866 ↗
24. Influence of the grain size on the strain rate sensitivity in an Mg–Al–Zn alloy at moderate temperatures10.1016/j.scriptamat.2006.07.013 ↗
25. Magnesium, iron and zinc alloys, the trifecta of bioresorbable orthopaedic and vascular implantation - a review10.4172/2155-952X.1000178 ↗
26. Current status and perspectives of zinc-based absorbable alloys for biomedical applications10.1016/j.actbio.2019.07.034 ↗
27. Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr
28. Production of zinc wire for use as a high strength biodegradable surgical threads
29. Development of bioabsorbable zinc-magnesium alloy wire and validation of its application to urinary tract surgeries10.1007/s00345-020-03138-7 ↗
30. Influence of the microstructure of the initial material on the Zn wires prepared by direct extrusion with a huge extrusion ratio10.3390/met11050787 ↗
31. Can zinc alloys be strengthened by grain refinement? A critical evaluation of the processing of low-alloyed binary zinc alloys using ECAP10.1016/j.msea.2019.01.117 ↗
32. Fabrication, mechanical properties and in vitro degradation behavior of newly developed ZnAg alloys for degradable implant applications10.1016/j.msec.2017.04.023 ↗
33. Achieving room temperature superplasticity in the Zn-0.5Cu alloy processed via equal channel angular pressing10.1016/j.msea.2018.03.052 ↗
34. Zn-Li alloy after extrusion and drawing: structural, mechanical characterization, and biodegradation in abdominal aorta of rat10.1016/j.msec.2017.02.167 ↗
35. Microstructure, deformation, and property of wrought magnesium alloys10.1007/s11661-020-05974-z ↗
36. Magnesium extrusion alloys: a review of developments and prospects10.1080/09506608.2017.1421439 ↗
37. Twinning-detwinning assisted reversible plasticity in thin magnesium wires prepared by one-step direct extrusion10.1016/j.matdes.2016.08.016 ↗
38. On the direct extrusion of magnesium wires from Mg-Al-Zn series alloys10.3390/met10091208 ↗
39. Property profile development during wire extrusion and wire drawing of magnesium alloys AZ31 and ZX10
40. Drawing of magnesium fine wire and medical application of drawn wire
41. Absorbable filament technologies: wire-drawing to enable next-generation medical devices
42. Corrosion behavior of Mg wires for ureteral stent in artificial urine solution10.1016/j.corsci.2021.109567 ↗
43. Shielding AZ91D-1%Ca from corrosion through ultrasound melt treatment: a study for stent design10.1016/j.jma.2023.07.013 ↗
44. Recent progress of novel biodegradable zinc alloys: from the perspective of strengthening and toughening10.1016/j.jmrt.2022.01.004 ↗
45. Novel Zn-based alloys for biodegradable stent applications: design, development and in vitro degradation10.1016/j.jmbbm.2016.03.018 ↗
46. The grain refining mechanism of cast zinc through silver inoculation10.1016/j.actamat.2014.07.026 ↗
47. Magnesium permanent mold castings optimization
48. Comment on Mg-Zn (magnesium-zinc)10.1007/BF02667700 ↗
49. Alloying and processing effects on the microstructure, mechanical properties, and degradation behavior of extruded magnesium alloys containing calcium, cerium, or silver10.3390/ma13020391 ↗
50. Advanced direct extrusion process with real-time controllable extrusion parameters for microstructure optimization of magnesium alloys
51. The effect of solute elements on the grain refinement of cast Zn10.1007/s11661-013-1861-1 ↗
52. Influence of process parameters and die design on the microstructure and texture development of direct extruded magnesium flat products
53. Processing effects on the formability of extruded flat products of magnesium alloys10.3389/fmats.2019.00253 ↗
54. Hot-extrusion behavior of biodegradable Zn-Mg alloys
55. The origin of "rare earth" texture development in extruded Mg-based alloys and its effect on tensile ductility10.1016/j.msea.2008.05.045 ↗
56. Calcium and zirconium as texture modifiers during rolling and annealing of magnesium-zinc alloys10.1016/j.matchar.2015.02.002 ↗
57. Unraveling recrystallization mechanisms governing texture development from rare-earth element additions to magnesium10.1007/s11661-018-4520-8 ↗
58. Effect of rare earth elements on the microstructure and texture development in magnesium-manganese alloys during extrusion10.1016/j.msea.2010.07.081 ↗
59. Zn–0.8Mn alloy for degradable structural applications: hot compression behaviors, four dynamic recrystallization mechanisms, and better elevated-temperature strength10.1016/j.jmst.2022.08.002 ↗
60. Dynamic recrystallization and its effect on superior plasticity of cold-rolled bioabsorbable zinc-copper alloys10.3390/ma14133483 ↗
61. Influence of strain rate and crystallographic orientation on dynamic recrystallization of pure Zn during room-temperature compression10.1016/j.jmst.2020.12.077 ↗
62. Effect of process temperature on the texture evolution and mechanical properties of rolled and extruded AZ31 flat products10.3390/cryst12091307 ↗
63. Microstructure evolution of polycrystalline zinc during tensile testing at room temperature10.1007/s11665-023-08466-4 ↗
64. Mechanical characteristics and structure of highly deformed zinc10.1007/s11665-021-06520-7 ↗
65. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
66. Alloying design strategy for biodegradable zinc alloys based on first-principles study of solid solution strengthening
67. Diameter-dependent in vitro performance of biodegradable pure zinc wires for suture application10.1016/j.jmst.2019.03.006 ↗
68. Influence of heat treatments on the microstructure and mechanical properties of two fine Mg–Li–Y alloy wires for bioresorbable applications10.1002/adem.202201164 ↗
69. Influence of thermal processing on resoloy wire microstructure and properties10.1002/adem.202001278 ↗