The effect of heating stage parameters on AlSi coating microstructure and fracture at high temperatures
Source abstract
Abstract
AlSi coating fracture during press hardening of boron steel can significantly increase tool wear and reduce the product quality. During heating of AlSi-coated press hardening steel, the coating layer evolves due to diffusion. This results in various Fe Al intermetallic compounds (such as FeAl, Fe2Al5), voids throughout the coating and rise in surface roughness. The goal of this study is to investigate the effect of heating parameters on AlSi coating micro-structure and thereby on its fracture behavior during deformation at elevated temperatures. Heating and quenching experiments are performed and later the coating layer is inspected under the microscope to check the distribution of intermetallics, voids and surface roughness. Subsequently, the coating fracture for the micro-structures resulting from different heating parameters is investigated during uniaxial tensile deformation at 700 °C. After the test, the severity of coating cracks is correlated in terms of the percentage of Fe-rich compounds and void distributions in the AlSi coating. The results show that by increasing the amount of Fe-rich compounds in the coating, its crack density is significantly reduced. Finally, it is shown that by adjusting the heating stage parameters, it is possible to further improve the ductility of coating micro-structure and minimize coating fracture upon tensile deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metal Alloys Wear and Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Lechler · 2009
2. Studies on the rate of growth of alloying layer aluminized steel10.2320/jinstmet1952.19.10_578 ↗
3. Reactions between low alloyed steel and initially pure as well as iron-saturated aluminum melts between 670 and 800-degrees-c
4. A review on hot stamping10.1016/j.jmatprotec.2010.07.019 ↗
5. Suehiro · 2003
6. Phase formation at the interface between a boron alloyed steel substrate and an Al-rich coating10.1016/j.surfcoat.2013.03.045 ↗
7. Microstructure studies of an aluminide coating on 9Cr-1Mo steel during high temperature oxidation10.1016/j.surfcoat.2005.11.038 ↗
8. Mehrer · 2007
9. Diffusion in intermetallic phases of the Fe–Al and Fe–Si systems10.1016/S0921-5093(97)00680-1 ↗
10. Evolution of phases, microstructure, and surface roughness during heat treatment of aluminized low carbon steel10.1007/s11661-009-0105-x ↗
11. Effect of Si on the growth behavior of the Fe 2 Al 5 phase at Al-x Si (liquid)/Fe (solid) interface during holding by in-situ synchrotron radiography
12. Equilibrium point defects in intermetallics with the B2 structure: NiAl and FeAl10.1103/PhysRevB.48.6712 ↗
13. Theory of atomic defects and diffusion in ordered compounds, and application to B2-FeAl10.1016/S0966-9795(98)00116-2 ↗
14. Wolff · 1997
15. Venema · 2019
16. Thermo-mechanical behavior of the Al–Si alloy coated hot stamping boron steel10.1016/j.matdes.2014.03.011 ↗
17. Numerical and experimental studies of AlSi coating microstructure and its fracture at high temperatures10.1016/j.msea.2021.142067 ↗
18. Modeling crack initiation in Al-Si coating during heating/quenching phase of hot stamping process
19. Investigating AlSi coating fracture at high temperatures using acoustic emission sensors10.1016/j.surfcoat.2021.127587 ↗
20. Coating degradation in hot press forming10.2355/isijinternational.50.561 ↗
21. In situ surface imaging: high temperature environmental SEM study of the surface changes during heat treatment of an AlSi coated boron steel10.1016/j.matchar.2020.110266 ↗
22. Influence of multi-step heating methods on properties of Al–Si coating boron steel sheet10.3390/coatings11020164 ↗
23. Investigation on induction heating for hot stamping of boron alloyed steels10.1016/j.cirp.2009.03.090 ↗
24. Press-hardened components from Kassel-chances and challenges
25. Enhancing ductility of the Al-Si coating on hot stamping steel by controlling the Fe-Al phase transformation during austenitization10.1007/s11431-014-5576-3 ↗