Temperature dependence of work hardening controlled by nitrogen-induced dislocation structures in austenitic steel
Source abstract
Abstract
This study examined the temperature-dependent influence of nitrogen on the tensile behavior of austenitic steel at 293, 201, and 77 K. In both nitrogen-free and nitrogen-bearing steels, the work-hardening rate increased as temperature decreased, but the mechanisms differed markedly. In nitrogen-free steel, dislocation cells formed at 293 and 201 K, while planar dislocation arrays and deformation twins appeared at 77 K due to reduced stacking fault energy (SFE). The temperature dependence of the work-hardening rate became evident only at high strains, reflecting the influence of strain-dependent dynamic recovery and deformation twinning, both affected by SFE. In nitrogen-bearing steel, work hardening showed a clear temperature dependence across all strain regions. Planar dislocation arrays developed consistently, with minimal cell formation. The dislocation density increased at lower temperatures due to suppressed slip system activity and dynamic recovery in nitrogen-bearing steel. A Bailey–Hirsch-like relationship was observed between flow stress and the square root of dislocation density in both steels. The slope was steeper in nitrogen-bearing steel, indicating a stronger contribution of dislocation accumulation to strengthening. Nitrogen also promoted long-range stress fields via dislocation pile-ups on planar slip planes. These effects intensified at lower temperatures, as the thermally reduced activation of Frank–Read sources shortened the mean free path, increased dislocation density, and enhanced work hardening.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and Mechanical Properties of Steels · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. The behaviour and deformation mechanisms for 316L stainless steel deformed at cryogenic temperatures10.1016/j.msea.2023.145279 ↗
2. Review of the mechanical properties of high-strength alloys at cryogenic temperatures10.1520/MPC20200138 ↗
3. Reed · 1983
4. Hierarchical strategy toward strong and ductile austenitic stainless steel for cryogenic application10.1016/j.msea.2025.148305 ↗
5. Effect of grain boundary evolution on the microstructure and cryogenic impact toughness of high alloy austenitic stainless steel
6. In-situ neutron diffraction study of serration-involved ultra-cryogenic deformation behavior at 15 K10.1016/j.msea.2024.146453 ↗
7. Effects of dislocations and hydrogen concentration on hydrogen embrittlement of austenitic 316 stainless steels10.1016/j.jallcom.2021.160134 ↗
8. Role of solute hydrogen on mechanical property enhancement in Fe–24Cr–19Ni austenitic steel: an in situ neutron diffraction study10.1016/j.actamat.2025.120767 ↗
9. Effects of grain boundary character distribution on hydrogen-induced cracks initiation and propagation at different strain rates in a nickel-saving and high-nitrogen austenitic stainless steel10.1016/j.msea.2022.144509 ↗
10. Carbon effect on hydrogen diffusivity and embrittlement in austenitic stainless steels10.1016/j.corsci.2020.109226 ↗
11. Production of austenitic steel for the LHC superconducting dipole magnets10.1109/TASC.2006.873244 ↗
12. 2025
13. 2025
14. Cryogenic impact toughness of a work hardened austenitic stainless steel10.1016/j.mtla.2022.101460 ↗
15. The sigmoidal strain hardening behaviour of a metastable AISI 301LN austenitic stainless steel as a function of temperature10.1016/j.msea.2020.139741 ↗
16. Insights into the impact behavior and deformation substructure evolution of the N‐bearing QN1803 and 304 stainless steels
17. The microstructure and mechanical properties of novel cryogenic twinning-induced plasticity steel welded joint10.1016/j.msea.2021.141449 ↗
18. Revealing the cryogenic-temperature toughness and deformation mechanisms in high manganese austenitic steels10.1016/j.matchar.2022.112024 ↗
19. Enhancing strength and cryogenic toughness of high manganese TWIP steel plate by double strengthened structure design10.1016/j.msea.2020.139397 ↗
20. Tensile properties and deformation behavior of ferrite and austenite duplex stainless steel at cryogenic temperatures10.1016/j.msea.2020.140442 ↗
21. Excellent cryogenic strength-ductility synergy in duplex stainless steel with heterogeneous lamella structure10.1016/j.msea.2021.142335 ↗
22. Intermediate stacking fault and twinning induced cooperative strain evolution of dual phase in lean duplex stainless steels with excellent cryogenic strength-ductility combinations10.1016/j.msea.2021.142347 ↗
23. Effect of nitrogen addition on strain rate dependence of flow stress in austenitic stainless steels10.2320/jinstmet.69.867 ↗
24. Fabrication of ultrahigh nitrogen austenitic steels by nitrogen gas absorption into solid solution10.1007/s11661-003-0018-z ↗
25. Work hardening mechanism in high nitrogen austenitic steel studied by in situ neutron diffraction and in situ electron backscattering diffraction10.1016/j.msea.2009.07.066 ↗
26. Simultaneous improvement of strength and plasticity: Nano-twin construction for a novel high-nitrogen TWIP steel10.1016/j.ijplas.2024.104144 ↗
27. Effect of N on microstructure evolution and strain hardening of high-Mn austenitic steel during tensile deformation10.1016/j.msea.2024.146291 ↗
28. Effect of nitrogen content on mechanical properties of 316L(N) austenitic stainless steel10.1016/j.msea.2023.145549 ↗
29. Effects of nitrogen content and strain rate on the tensile behavior of high-nitrogen and nickel-free austenitic stainless steel10.3390/cryst13010129 ↗
30. Nitrogen‐enhanced temperature dependence of grain refinement strengthening in austenitic stainless steel
31. Work-hardening mechanism in high-nitrogen austenitic stainless steel10.2320/matertrans.H-M2020804 ↗
32. Difference between carbon and nitrogen in thermal stability of metastable 18%Cr-8%Ni austenite10.1016/j.scriptamat.2018.05.019 ↗
33. Effect of carbon and nitrogen on Md30 in metastable austenitic stainless steel10.2355/isijinternational.ISIJINT-2020-719 ↗
34. The difference in thermal and mechanical stabilities of austenite between carbon- and nitrogen-added metastable austenitic stainless steels10.1016/j.actamat.2014.10.041 ↗
35. Design of alloy composition in 5%Mn-Cr-C austenitic steels10.2355/isijinternational.55.312 ↗
36. Twinning and strain-induced F.C.C. → H.C.P. transformation in the Fe-Mn-Cr-C system10.1016/0025-5416(77)90093-3 ↗
37. Temperature dependence of stacking fault energy in close-packed metals and alloys10.1016/0025-5416(78)90194-5 ↗
38. XRD measurement of stacking fault energy of Cr-Ni austenitic steels: influence of temperature and alloying elements10.1007/s10853-020-04953-4 ↗
39. Temperature effect on deformation mechanisms and mechanical properties of a high manganese C+N alloyed austenitic stainless steel10.1016/j.msea.2015.06.047 ↗
40. Temperature dependence of deformation behaviors in high manganese austenitic steel for cryogenic applications10.3390/ma14185426 ↗
41. Combined effect of interstitial-substitutional elements on dislocation dynamics in nitrogen-added austenitic stainless steels10.1038/s41598-024-54852-w ↗
42. Thermodynamic analysis of the short-range order strengthening in Fe-Ni-Cr-N austenite10.1016/S0364-5916(96)00029-6 ↗
43. Nanosized Cr-N clustering in expanded austenite layer of low temperature plasma-nitrided Fe-35Ni-10Cr alloy10.1016/j.scriptamat.2022.114637 ↗
44. High-throughput investigation of Cr-N cluster formation in Fe-35Ni-Cr system during low-temperature nitriding10.1016/j.actamat.2023.118921 ↗
45. Monte Carlo analysis of short-range order in nitrogen-strengthened Fe-Ni-Cr-N austenitic alloys10.1016/0921-5093(93)90604-D ↗
46. On the origin of planar slip in f.c.c. alloys10.1016/0001-6160(89)90143-0 ↗
47. Weak beam TEM study on stacking fault energy of high nitrogen steels
48. Effect of the surface layer strained by mechanical grinding on X-ray diffraction analysis10.2355/isijinternational.ISIJINT-2017-578 ↗
49. The contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice10.1107/S0021889899009334 ↗
50. Dislocation densities, arrangements and character from X-ray diffraction experiments10.1016/S0921-5093(00)01685-3 ↗
51. Deformation of single crystal Hadfield steel by twinning and slip10.1016/S1359-6454(99)00383-3 ↗
52. Weak beam Tem studies of composite dislocations in f.c.c. alloys10.1016/0001-6160(75)90160-1 ↗
53. Work-hardening behavior and evolution of dislocation-microstructures in high-nitrogen bearing austenitic steels10.2355/isijinternational.38.474 ↗
54. Competing mechanisms and modeling of deformation in austenitic stainless steel single crystals with and without nitrogen10.1016/S1359-6454(01)00296-8 ↗
55. Effects of short-range ordering and stacking fault energy on tensile behavior of nitrogen-containing austenitic stainless steels10.1016/j.msea.2022.142730 ↗
56. The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silver10.1080/14786436008238300 ↗
57. Thermal stability and thermal property characterisation of Fe–14.4Cr–15.4Ni–2.4Mo–2.36Mn–0.25Ti–1.02Si–0.042C–0.04P–0.005B (mass%) austenitic stainless steel (Alloy D9I)10.1016/j.nucengdes.2012.09.024 ↗
58. In-situ observation of dislocation evolution in ferritic and austenitic stainless steels under tensile deformation by using neutron diffraction10.2355/tetsutohagane.TETSU-2017-082 ↗
59. Kinetics of f.c.c. deformation twinning and its relationship to stress-strain behaviour10.1016/0001-6160(78)90170-0 ↗
60. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
61. The cleavage strength of polycrystal
62. Work-hardening and work-softening of face-centred cubic metal crystals
63. Hirsch · 1975 · 189
64. Effect of nitrogen addition on the stacking-fault energies in Si-added austenitic stainless steel10.2355/isijinternational.ISIJINT-2020-609 ↗
65. Influence of nitrogen content and deformation temperatures on dislocation structures in austenitic stainless steels10.2355/tetsutohagane.TETSU-2024-054 ↗
66. Temperature-dependence of the frank-read source in Si10.1016/S0927-0256(96)00078-X ↗