Microstructure and deformation behavior of the wire-arc directed energy deposited high-performance near-β Ti-10V-2Fe-3Al alloy
Source abstract
Abstract
The near-β titanium alloy Ti-10V-2Fe-3Al is a high-performance alloy in use in highly loaded, safety relevant applications such as landing gears. The conventional manufacturing route employs several forging and heat treatment steps. Here, we investigate an alternative route via wire-based directed energy deposition (waDED) offering advantages regarding energy consumption, time, and resource efficiency. The deposited and heat-treated material is characterized in terms of microstructure using optical light microscopy, scanning electron microscopy including electron back-scatter diffraction and high-energy X-ray diffraction. The mechanical properties are assessed using microhardness and tensile testing. The microstructure consists of large primary β grains with embedded α laths. Upon aging, the retained β-phase decomposes forming a bimodal microstructure. In the final solution heat-treated and aged condition, yield strength values reach above 960 MPa and ultimate tensile strength values above 1030 MPa with fracture strains of about 3 % and only weak anisotropy. The performed analyses suggest that plastic deformation is assisted by stress-induced martensite formation. This transformation was substantiated by atomistic simulations. A comprehensive understanding of the material characteristics of the Ti-10V-2Fe-3Al alloy processed by waDED and subsequent heat treatments is provided – a contribution to implementing advanced titanium alloys processed via alternative routes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Opportunities and issues in the application of titanium alloys for aerospace components10.3390/met10060705 ↗
2. An analysis of the forgeability of Ti-10V-2Fe-3Al β titanium alloy using a combined estrin mecking and avrami material constitutive model10.1016/j.ijmecsci.2021.106975 ↗
3. The microstructural evolution of near beta alloy Ti-10V-2Fe-3Al during subtransus forging10.1007/s11661-005-0223-z ↗
4. Design properties of a high-strength titanium alloy, Ti-10V-2Fe-3Al
5. Strong deformation anisotropies of ω-precipitates and strengthening mechanisms in Ti-10V-2Fe-3Al alloy micropillars: precipitates shearing vs precipitates disordering10.1016/j.actamat.2016.06.065 ↗
6. Stepanova · 2023
7. Wire-feed additive manufacturing of metal components: technologies, developments and future interests10.1007/s00170-015-7077-3 ↗
8. Invited review article: strategies and processes for high quality wire arc additive manufacturing
9. Investigation of complex single-walled intersecting structures fabricated by wire-arc directed energy deposition10.1108/RPJ-10-2023-0345 ↗
10. An environmental impact comparison between wire + arc additive manufacture and forging for the production of a titanium component
11. On the origin of microstructural banding in Ti-6Al4V wire-arc based high deposition rate additive manufacturing10.1016/j.actamat.2018.12.038 ↗
12. Effects of high deposition rate during cold metal transfer additive manufacturing on microstructure and properties of Ti-6Al-4V
13. Comparison of microstructure refinement in wire-arc additively manufactured Ti–6Al–2Sn–4Zr–2Mo–0.1Si and Ti–6Al–4V built with inter-pass deformation10.1007/s11661-022-06811-1 ↗
14. The influence of microstructure heterogeneity on the tensile deformation behaviour of cold metal transfer additively manufactured Ti6Al4V10.1016/j.jallcom.2024.178257 ↗
15. High strength heat-treatable β-titanium alloy for additive manufacturing10.1016/j.msea.2020.139646 ↗
16. High stability and high strength β-titanium alloys for additive manufacturing10.1016/j.msea.2021.141326 ↗
17. Eliminating porosity defects, promoting equiaxed grains and improving the mechanical properties of additively manufactured Ti-22V-4Al with super-transus hot isostatic pressing
18. Influence of interpass cooling conditions on microstructure and tensile properties of Ti-6Al-4V parts manufactured by WAAM10.1007/s40194-020-00921-3 ↗
19. Low-cycle fatigue behavior of wire and arc additively manufactured Ti-6Al-4V material10.3390/ma16186083 ↗
20. Influence of the temperature–time regime on the mechanical properties during the DED-arc process of near-net-shape Ti-6Al-4 V components10.1007/s40194-023-01513-7 ↗
21. Fatigue performance of Ti-6Al-4V processed by wire-arc directed energy deposition
22. Deformation mechanism of bimodal microstructure in Ti-6Al-4V alloy: the effects of intercritical annealing temperature and constituent hardness10.1016/j.jmst.2020.08.057 ↗
23. Optimization of the post-process heat treatment strategy for a Near-α titanium base alloy produced by laser powder bed fusion10.3390/ma15031032 ↗
24. Deformation and strength characteristics of laves phases in titanium alloys10.1016/j.matdes.2019.107891 ↗
25. 2000 · 1
26. Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti6Al4V by selective electron beam melting10.1016/j.matchar.2013.07.012 ↗
27. The fast azimuthal integration python library: PyFAI10.1107/S1600576715004306 ↗
28. Profex: a graphical user interface for the rietveld refinement program BGMN10.1107/S1600576715014685 ↗
29. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
30. Efficient iterative schemes for initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
31. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
32. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
33. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
34. Holec
35. Electronic properties of random alloys: special quasirandom structures10.1103/PhysRevB.42.9622 ↗
36. Models of configurationally-complex alloys made simple10.1016/j.cpc.2023.108664 ↗
37. The influence of iron in minimizing the microstructural anisotropy of Ti-6Al-4V produced by laser powder-bed fusion10.1007/s11661-020-05692-6 ↗
38. Use of alloying to effect an equiaxed microstructure in additive manufacturing and subsequent heat treatment of high-strength titanium alloys10.1007/s11661-021-06475-3 ↗
39. The interdependence theory: the relationship between grain formation and nucleant selection10.1016/j.actamat.2011.04.035 ↗
40. Additive manufacturing of ultrafine-grained high-strength titanium alloys10.1038/s41586-019-1783-1 ↗
41. Beryllium as a grain refiner in titanium alloys10.1016/j.jallcom.2009.03.016 ↗
42. Donachie · 2000
43. Effect of beta flecks on mechanical properties of Ti-10V-2Fe-3Al alloy10.1016/S0921-5093(98)00954-X ↗
44. Towards β-fleck defect free additively manufactured titanium alloys by promoting the columnar to equiaxed transition and grain refinement10.1016/j.actamat.2021.117511 ↗
45. Orientation dependent mechanical properties of commercially pure (cp) titanium10.1016/j.matchar.2014.10.011 ↗
46. Alpha texture variations in additive manufactured Ti-6Al-4V investigated with neutron diffraction
47. High strain rate deformation of aged TRIP Ti-10V-2Fe-3Al (Wt.%) examined by in-situ synchrotron X-ray diffraction10.1016/j.actamat.2022.118621 ↗
48. Micromechanics of Ti-10V-2Fe-3Al: in situ synchrotron characterisation and modelling10.1016/j.actamat.2007.08.049 ↗
49. A novel approach to control the thermal/stress-induced products of body-centered cubic titanium alloys in terms of specific orientation moduli
50. Deformation of an alloy with a lamellar microstructure: experimental behavior of individual widmannstatten colonies of an alpha - beta titanium alloy10.1007/BF02643801 ↗
51. Strength and fracture resistance of in-situ alloyed compositionally-graded Al-Si processed by dual-wire arc directed energy deposition
52. Interplay between effect of Mo and chemical disorder on the stability of β/βo-TiAl phase10.1016/j.intermet.2015.03.001 ↗
53. On the energetics of the cubic‐to‐hexagonal transformations in tiAl+Mo alloys10.1016/j.actamat.2022.118268 ↗
54. Factors affecting confidence index in EBSD analysis10.1016/j.ultramic.2021.113269 ↗
55. Morinaga · 1988 · 1601
56. Influence of α morphology and volume fraction on the stress-induced martensitic transformation in Ti-10V-2Fe-3Al10.1016/j.msea.2011.03.107 ↗
57. Effects of the morphology of grain boundary α-phase on the anisotropic deformation behaviors of additive manufactured Ti–6Al–4V10.1016/j.matdes.2022.111150 ↗
58. Froes · 2015
59. Assessing the scale contributing factors of three carbide-free bainitic steels: a complementary theoretical and experimental approach10.1016/j.matdes.2020.109217 ↗
60. Carbon partitioning into austenite after martensite transformation10.1016/S1359-6454(03)00059-4 ↗