Modeling of temperature-sensitive anisotropic behavior of AZ31B magnesium alloy sheets: Integration of polycrystal plasticity and yield function calibration
Source abstract
Abstract
Accurate modeling of the temperature-sensitive in-plane anisotropic behavior of Mg alloys using finite element method simulations is crucial for the widespread application of this environmentally friendly material. This study evaluates the applicability and accuracy of using a polycrystalline plasticity model to calibrate phenomenological models for AZ31B magnesium alloy sheets across multiple temperature scales. Mechanical tests including uniaxial tension tests, and layer and disk compression tests were conducted at various temperatures (25–250 °C) to obtain anisotropic data. A part of the experimental data was utilized to identify the viscoplastic self-consistent polycrystal plasticity (VPSC) model based on the texture information of the material. Subsequently, virtual experiments were conducted within the VPSC model to simulate the anisotropic parameters of the alloy under various temperature conditions. These parameters were next employed to calibrate three yield functions and compared with corresponding results calibrated based on the experimental data. The approach demonstrated an exceptional capability in fitting the experimental results in most cases, although the interference from grain activities influences the accuracy of VPSC model in predicting the R-values at higher temperatures. Overall, this approach is practical for enhancing the accuracy of anisotropy modeling across temperature scales with a few conveniently obtainable tests. Moreover, among the yield functions, Yld 2004-18p provided the most accurate modeling of the anisotropic behavior of the Mg alloy sheet.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B10.1016/j.ijplas.2004.05.018 ↗
2. Cold rolling textures in AZ31 wrought magnesium alloy10.1016/j.scriptamat.2004.01.010 ↗
3. Deformation microstructures and textures of some cold rolled Mg alloys10.1016/S0921-5093(04)00942-6 ↗
4. Texture evolution during cold rolling of dilute Mg alloys10.1016/j.scriptamat.2015.06.009 ↗
5. Linear transformation-based anisotropic yield functions10.1016/j.ijplas.2004.06.004 ↗
6. Material model development of magnesium alloy and its strength evaluation10.3390/ma14020454 ↗
7. A theory of the yielding and plastic flow of anisotropic metals10.1098/rspa.1948.0045 ↗
8. Theoretical plasticity of textured aggregates10.1017/S0305004100055596 ↗
9. Constitutive modeling of orthotropic plasticity in sheet metals10.1016/0022-5096(90)90006-P ↗
10. A user-friendly theory of orthotropic plasticity in sheet metals10.1016/0020-7403(93)90061-X ↗
11. A 6-component yield function for anisotropic materials10.1016/0749-6419(91)90052-Z ↗
12. Yield function development for aluminum alloy sheets10.1016/S0022-5096(97)00034-3 ↗
13. Unconditionally convex yield functions for sheet metal forming based on linear stress deviator transformation10.4028/www.scientific.net/KEM.504-506.667 ↗
14. Non-quadratic yield criterion for orthotropic sheet metals under plane-stress conditions10.1016/S0020-7403(03)00139-5 ↗
15. An improved analytical description of orthotropy in metallic sheets10.1016/j.ijplas.2004.04.003 ↗
16. A new yield criterion for orthotropic sheet metals under plane–stress conditions
17. A criterion for description of anisotropy and yield differential effects in pressure-insensitive metals10.1016/j.ijplas.2003.11.021 ↗
18. Orthotropic yield criterion for hexagonal closed packed metals10.1016/j.ijplas.2005.06.001 ↗
19. A virtual materials testing approach to calibrate anisotropic yield functions for the simulation of earing during deep drawing of aluminium alloy sheet10.1016/j.msea.2021.141389 ↗
20. Capability of the BBC2008 yield criterion in predicting the earing profile in cup deep drawing simulations10.1016/j.euromechsol.2013.11.013 ↗
21. A virtual laboratory using high resolution crystal plasticity simulations to determine the initial yield surface for sheet metal forming operations10.1016/j.ijplas.2016.01.002 ↗
22. Sachs · 1928 · Z-VDI 72 · 734
23. Plastic strain in metals
24. A theory of the plastic distortion of a polycrystalline aggregate under combined stresses10.1080/14786445108561065 ↗
25. Modelling the plastic anisotropy of metals10.1007/BF02736210 ↗
26. A self-consistent approach of the large deformation polycrystal viscoplasticity10.1016/0001-6160(87)90297-5 ↗
27. A self-consistent viscoplastic model - prediction of rolling textures of anisotropic polycrystals10.1016/0921-5093(94)91047-2 ↗
28. Multi-scale investigation of highly anisotropic zinc alloys using crystal plasticity and inverse analysis10.1016/j.msea.2018.05.038 ↗
29. Integrated crystal plasticity and phase field model for prediction of recrystallization texture and anisotropic mechanical properties of cold-rolled ultra-low carbon steels10.1016/j.ijplas.2019.102644 ↗
30. Calibration of Barlat Yld2004-18P yield function using CPFEM and 3D RVE for the simulation of single point incremental forming (SPIF) of 7075-O aluminum sheet10.1016/j.ijmecsci.2018.05.015 ↗
31. Modelling of grain size effects in progressive microforming using CPFEM10.1016/j.ijmecsci.2024.108971 ↗
32. Simulation of metal forming- Visualization of invisible phenomena in the digital era10.1016/j.cirp.2022.05.007 ↗
33. Multi-level deep drawing simulations of AA3104 aluminium alloy using crystal plasticity finite element modelling and phenomenological yield function10.1177/16878140211001203 ↗
34. Modeling the temperature dependent effect of twinning on the behavior of magnesium alloy AZ31B sheet10.1016/j.msea.2006.03.160 ↗
35. Investigating the temperature dependency of plastic deformation in a Mg-3Al-1Zn alloy10.1016/j.msea.2018.04.019 ↗
36. Temperature dependent evolution of anisotropy and asymmetry of α-Ti in thermomechanical working: characterization and modeling10.1016/j.ijplas.2019.102650 ↗
37. Mechanical testing of thin sheet magnesium alloys in biaxial tension and uniaxial compression10.1007/s11340-014-9892-0 ↗
38. Plane stress yield function for aluminum alloy sheets - part 1: theory10.1016/S0749-6419(02)00019-0 ↗
39. A simplified method for the evaluation of the layer compression test using one 3D digital image correlation system and considering the material anisotropy by the equibiaxial Lankford parameter
40. Dieter · 2003
41. Determination of the yield of four sheet materials (AA6111-T4, AC600, DX54D+Z, and H220BD+Z) by using uniaxial tensile and hydraulic bulge tests10.1007/s00170-018-2339-5 ↗
42. A self-consistent anisotropic approach for the simulation of plastic-deformation and texture development of polycrystals - application to zirconium alloys10.1016/0956-7151(93)90130-K ↗
43. On the role of the constitutive model and basal texture on the mechanical behaviour of magnesium alloy AZ31B sheet10.1631/jzus.A1000107 ↗
44. Prediction of deformation texture of FCC metals using crystal plasticity self-consistent model and its comparison with prediction based on taylor's uniform strain assumption10.2472/jsms.68.818 ↗
45. Experiment and crystal plasticity analysis on plastic deformation of AZ31B Mg alloy sheet under intermediate temperatures: how deformation mechanisms evolve10.1016/j.ijplas.2015.12.006 ↗
46. Modelling of formula for flow stress of a magnesium alloy AZ31 sheet at elevated temperatures10.1016/j.jmatprotec.2005.02.034 ↗
47. Mechanical response of AZ31B magnesium alloy: experimental characterization and material modeling considering proportional loading at room temperature10.1016/j.ijplas.2013.10.006 ↗
48. Anisotropic yield surfaces of additively manufactured metals simulated with crystal plasticity10.1016/j.euromechsol.2022.104506 ↗
49. Plastic anisotropy and deformation behavior of extruded Mg-Y sheets at elevated temperatures10.1016/j.msea.2017.06.047 ↗
50. Correlation of plastic deformation and dynamic recrystallization in magnesium alloy Zk6010.1016/S1359-6454(01)00020-9 ↗
51. Interaction between texture evolution and dynamic recrystallization of extruded AZ80 magnesium alloy during hot deformation10.1016/j.msea.2020.139537 ↗
52. Prediction of anisotropic deformation behavior of TA32 titanium alloy sheet during hot tension by crystal plasticity finite element model10.1016/j.msea.2022.143137 ↗