journal article·2025-02

Realizing improved strain aging capability in bake-hardenable steel

Gang Hee Gu, Yongju Kim, Hyeonseok Kwon, Jae Heung Lee, Sangbong Yi, Emad Maawad, Changwan Ha, Min Hong Seo, Hyoung Seop Kim

Publisher page

Abstract

It was revealed that heterogeneous microstructures enhance the strain aging capability of bake-hardenable steels. The improved strain aging capability was validated through a quantitative comparison using a single material with identical chemical composition, grain size, and initial dislocation density. Beyond well-known improvements by hetero-deformation induced (HDI) strengthening and hardening, heterostructured low-carbon steel was found to have improved strain aging ability compared to its homogeneous counterpart. The mechanisms underlying enhanced strain aging capability are as follows: The strength enhancement mechanism of heterostructured materials, defined as HDI effect, produces additional geometrically necessary dislocations (GNDs) during plastic deformation. The increased dislocation density in the heterostructured low-carbon steel compared to its homogeneous counterpart (∼ 1.9 X 10^14 m^-2 at 5 % plastic pre-strain) provides additional carbon segregation sites, forming Cottrell atmospheres during subsequent low-temperature heat treatment (200 °C for 20 min). The segregated carbon atoms function as pinning dislocations, and a greater number of pinned dislocations in the heterostructured low-carbon steel necessitates higher stresses for the initiation of plastic deformation. Consequently, the heterostructured low-carbon steel, subjected to the strain aging process with 5 % plastic pre-strain, achieved an improved yield strength over the homogeneous low-carbon steel in the same state, primarily attributed to the contributions of the HDI effect (∼17.14 MPa) and an improved bake hardening response (∼19.37 MPa). These findings uncover additional functionalities of heterostructured low-carbon steels, offering substantial implications that span from fundamental research to industrial applications, particularly due to their enhanced mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Synergetic effect of Sc micro-alloying and low-frequency electromagnetic casting in 7A36 aluminum alloy with enhanced mechanical and corrosion properties10.1007/s12540-024-01662-4 ↗
2. Improving strength and ductility of Ti-4Al-0.005B titanium alloy through tailoring equiaxed and lamellar microstructure during thermal mechanical process10.1016/j.jmrt.2022.08.114 ↗
3. Multi-scale microstructure strengthening strategy in CoCrFeNiNb0.1Mo0.3 high entropy alloy overcoming strength-ductility trade-off10.1016/j.msea.2023.145446 ↗
4. Quantification of bake hardening effect in DP600 and TRIP700 steels10.1016/j.matdes.2014.01.001 ↗
5. Bake hardening of 7Mn–3Al-0.2C steel: influence of intercritical annealing temperature10.1016/j.msea.2022.143077 ↗
6. Bake hardening of ultra-fine grained low carbon steel produced by constrained groove pressing10.1016/j.msea.2012.04.024 ↗
7. Rana · 2016
8. Competition between grain boundary segregation and Cottrell atmosphere formation during static strain aging in ultra low carbon bake hardening steels10.1016/j.actamat.2004.03.046 ↗
9. Tensile properties and bake hardening response of dual phase steels with varied martensite volume fraction
10. Shear deformation behavior of heterostructured materials: experimental and numerical analyses10.1007/s12540-023-01572-x ↗
11. Ultra-high strength and ductility of eutectic high-entropy alloy with duplex heterostructure at room and cryogenic temperatures
12. Deformation mechanisms in a novel multiscale hetero-structured Mg alloy with high strength-ductility synergy10.1016/j.ijplas.2023.103766 ↗
13. Strength and ductility enhancement of plain carbon steel by heterostructure design10.1016/j.msea.2023.144770 ↗
14. Fundamental analysis of deformation behavior in core-shell heterostructured materials10.1016/j.commatsci.2022.111818 ↗
15. Excellent strengthening of low-carbon steel by severe free-end torsion10.1007/s12540-022-01369-4 ↗
16. Excellent strengthening of low-carbon steel by severe free-end torsion10.1007/s12540-022-01369-4 ↗
17. Enhancing strength and ductility of Al-matrix composite via a dual-heterostructure strategy10.1016/j.ijplas.2023.103825 ↗
18. Effects of pre-strain and temperature on bake hardening of TWIP900CR steel10.1016/S1006-706X(15)30012-1 ↗
19. A new finding on the benefits of heterostructured bake-hardenable steels: enhanced strain aging ability10.1016/j.msea.2024.146120 ↗
20. Unprecedented bake hardening responses of interstitial high-entropy alloy by synergistic effect with lattice distortion10.1016/j.matdes.2023.112289 ↗
21. Two-dimensional detector software: from real detector to idealised image or two-theta scan10.1080/08957959608201408 ↗
22. X-ray studies of deformed metals10.1016/0502-8205(59)90015-2 ↗
23. The determination of density and distribution of dislocations in deformed single crystals from broadened X-ray diffraction profiles10.1002/pssa.19700020224 ↗
24. Global optimum of microstructure parameters in the CMWP line-profile-analysis method by combining Marquardt-Levenberg and Monte-Carlo procedures10.1016/j.jmst.2019.01.014 ↗
25. Dislocation model of strain anisotropy10.1154/1.2918549 ↗
26. Characterization of dislocation evolution in cyclically loaded austenitic and ferritic stainless steels via XRD line-profile analysis10.2355/isijinternational.ISIJINT-2019-077 ↗
27. The convolutional multiple whole profile (CMWP) fitting method, a global optimization procedure for microstructure determination10.3390/cryst10070623 ↗
28. A unified phenomenological description of work hardening and creep based on one-parameter models10.1016/0001-6160(84)90202-5 ↗
29. Importance of microstructural features in bimodal structure-property linkage10.1007/s12540-022-01200-0 ↗
30. Deformation incompatibility enables hetero-deformation induced strengthening in Ti/Nb laminates10.1080/21663831.2022.2128916 ↗
31. Multi-scale investigation on local strain and damage evolution of Al1050/steel/Al1050 clad sheet10.1016/j.jmrt.2022.07.056 ↗
32. Indentation hardness and hot pressing10.1016/0001-6160(80)90166-2 ↗
33. Unconventional dislocation starvation behavior of medium-entropy alloy single crystal pillars containing pre-existing dislocations10.1016/j.jmst.2022.07.065 ↗
34. Micro-cantilever bending tests for understanding size effect in gradient elasticity10.1016/j.matdes.2022.110398 ↗
35. Dislocation density distribution at slip band-grain boundary intersections10.1016/j.actamat.2019.10.031 ↗
36. Hull · 2011
37. Superior strength-ductility combination resulted from hetero-zone boundary affected region in Cu-Fe layered material10.1016/j.jmst.2023.09.027 ↗
38. The dislocation behaviour and GND development in a nickel based superalloy during creep10.1016/j.ijplas.2019.02.015 ↗
39. Dual-phase hetero-structured strategy to improve ductility of a low carbon martensitic steel10.1016/j.msea.2021.142584 ↗
40. Enhanced fatigue resistance and fatigue-induced substructures in an additively manufactured CoCrNi medium-entropy alloy treated by ultrasonic surface rolling process
41. Additional hardening in harmonic structured materials by strain partitioning and back stress10.1080/21663831.2018.1439115 ↗
42. Multi-scaled heterostructure enables superior strength–ductility combination of a CoCrFeMnN compositionally-complex alloy
43. A dislocation-based model for all hardening stages in large strain deformation10.1016/S1359-6454(98)00196-7 ↗
44. Theory of lattice strain in a material undergoing plastic deformation: Basic formulation and applications to a cubic crystal10.1103/PhysRevB.79.214106 ↗
45. The influence of post-aging treatment on the microstructure and micromechanical behaviors of additively manufactured maraging steel investigated by in situ high-energy X-ray diffraction10.1016/j.jmst.2024.02.044 ↗
46. Size-dependent plastic deformation and failure mechanisms of nanotwinned Ni3Al: insights from an atomistic cracking model10.1016/j.msea.2015.10.006 ↗
47. Revealing the deformation mechanisms of ⟨110⟩ symmetric tilt grain boundaries in CoCrNi medium-entropy alloy10.1016/j.ijplas.2023.103832 ↗
48. First in situ lattice strains measurements under load at VULCAN10.1007/s11661-010-0495-9 ↗
49. In situ neutron diffraction study of IF and ultra low carbon steels upon tensile deformation10.1016/S1359-6454(02)00473-1 ↗
50. Microstructures and mechanical properties of the Mg–8Gd–4Y–Nd–Zn–3Si (wt%) alloy10.1016/j.msea.2013.01.056 ↗
51. The effects of grain size and porosity on the elastic modulus of nanocrystalline materials10.1016/S0965-9773(99)00052-5 ↗
52. Inelastic effects on springback in metals10.1016/S0749-6419(01)00054-7 ↗
53. Nonlinear elastic behaviors of low and high strength steels in unloading and reloading10.1016/j.msea.2012.11.020 ↗
54. Nano-scale solute heterogeneities in the ultrastrong selectively laser melted carbon-doped CoCrFeMnNi alloy10.1016/j.msea.2019.138726 ↗
55. From dislocation to nano-precipitations: evolution to low thermal conductivity and high thermoelectric performance in n-type PbTe10.1002/adfm.202005479 ↗
56. Monte Carlo and molecular dynamics simulations of screw dislocation locking by Cottrell atmospheres in low carbon Fe–C alloys10.1016/j.scriptamat.2015.06.012 ↗