Evaluation of thermal anisotropic evolution in the sinter structure of direct sinter joining to silicon via coupled microstructural characterizations
Source abstract
Abstract
Sinter joining is vital for developing next-generation power devices, and therefore, the joining properties of suitable materials such as fine metal particles have drawn considerable research attention. The evolution of the sinter structure and its relationship to the joint strength has previously been studied in terms of pore size, porosity, and grain size; however, its link to fracture morphology remains ambiguous, especially for dissimilar interfaces. In this study, the effect of the anisotropic microstructural evolution of an Ag/Si sintered joint on fracture behavior and joint strength during thermal storage at 250 °C was investigated. A coupled approach involving two-dimensional (2D) characterization based on cross-sectional observation and three-dimensional (3D) characterization rooted in X-ray nano-computed tomography was devised for clarifying the relationship between the thermal storage and macroscale/microscale fracture behaviors of a joint. A steep decrease in joint strength occurred at the initial stage of thermal storage; however, high durability with a joint strength greater than 40 MPa was maintained even after thermal storage for 1000 h. The 2D and 3D analyses reveal identical microstructural evolutions with respect to the anisotropic movement of Ag, oxygen-containing Ag, and pores in the sintered structure. Furthermore, microscale tensile tests show a marked decrease in local strength in the sintered layer because of the formation of large voids. Pore aggregation is found to dominate the anisotropic microstructural evolution and play a significant role in determining the fracture behavior and macroscale properties of Ag/Si sintered joints.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Deformation and oxidation of copper Metallization on ceramic substrate during thermal cycling from-40 °C to 250 °C10.1109/TCPMT.2015.2423612 ↗
2. Characterization of Bi-Ag-X solder for high temperature sic die attach10.1109/TCPMT.2014.2345500 ↗
3. Microstructure and shear properties of ultrasonic-assisted Sn2.5Ag0.7Cu0.1RExNi/Cu solder joints under thermal cycling10.1038/s41598-021-85685-6 ↗
4. Effects of Ag flake addition in Sn-3.0Ag-0.5Cu on microstructure and mechanical properties with high-temperature storage test10.1007/s11664-021-09102-4 ↗
5. Small particle melting of pure metals10.1016/0040-6090(86)90422-0 ↗
6. Melting in semiconductor nanocrystals10.1126/science.256.5062.1425 ↗
7. Joining of silver nanomaterials at low temperatures: processes, properties, and applications10.1021/acsami.5b02134 ↗
8. Comparing the mechanical and thermal-electrical properties of sintered copper (Cu) and sintered silver (Ag) joints10.1016/j.jallcom.2021.158783 ↗
9. Sintering mechanism of a supersaturated Ag-Cu nanoalloy film for power electronic packaging10.1021/acsami.9b20731 ↗
10. Pressureless sintering of nanosilver paste at low temperature to join large area (≥100 mm2) power chips for electronic packaging10.1016/j.matlet.2014.04.127 ↗
11. A novel multiscale silver paste for die bonding on bare copper by low-temperature pressure-free sintering in air10.1016/j.matdes.2017.11.054 ↗
12. Low-temperature low-pressure die attach with hybrid silver particle paste10.1016/j.microrel.2011.07.088 ↗
13. Ag particles for sinter bonding: flakes or spheres?10.1063/1.5099140 ↗
14. Microstructure and mechanical properties of sintered Ag particles with flake and spherical shape from nano to micro size10.1016/j.matdes.2018.11.062 ↗
15. Microscale Ag particle paste for sintered joints in high-power devices10.1016/j.matlet.2015.08.071 ↗
16. Large-scale ceramic–metal joining by nano-grained Ag particles paste sintering in low-temperature pressure-less conditions10.1016/j.scriptamat.2021.113747 ↗
17. A novel metal-to-metal bonding process through in-situ formation of Ag nanoparticles using Ag2O microparticles10.1088/1742-6596/165/1/012074 ↗
18. Ogura · 2015 · vol. 56 · 1030
19. Silver oxide decomposition mediated direct bonding of silicon-based materials10.1038/s41598-018-28788-x ↗
20. AlN-to-Metal direct bonding process utilizing sintering of Ag nanoparticles derived from the reduction of Ag2O10.1007/s11664-018-6504-2 ↗
21. Metallization-free silver sinter bonding to silicon via in situ decomposition of silver oxalate10.1016/j.matlet.2021.130205 ↗
22. Microstructural studies and bonding strength of pressureless sintered nano-silver joints on silver, direct bond copper (DBC) and copper substrates aged at 300 °C10.1016/j.jallcom.2016.06.132 ↗
23. Microstructural evolution and degradation mechanism of SiC–Cu chip attachment using sintered nano-Ag paste during high-temperature ageing10.1016/j.jallcom.2020.156442 ↗
24. Fracture behavior of thermally aged Ag–Cu composite sinter joint through microscale tensile test coupled with nano X-ray computed tomography10.1016/j.matdes.2021.109818 ↗
25. Microstructure evolution during 300 °C storage of sintered Ag nanoparticles on Ag and Au substrates10.1016/j.jallcom.2014.08.062 ↗
26. Improvement of high-temperature thermal aging reliability of Ag–Au joints by modifying Ni/Au surface finish10.1007/s10854-019-02415-5 ↗
27. An explanation for the effect of Au surface finish on the quality of sintered Ag-Au joints10.1016/j.apsusc.2023.156356 ↗
28. Thermostable Ag die-attach structure for high-temperature power devices10.1007/s10854-015-3894-2 ↗
29. Novel interface material used in high power electronic die-attaching on bare Cu substrates10.1007/s10854-016-5208-8 ↗
30. High-temperature reliability of low-temperature and pressureless micron Ag sintered joints for die attachment in high-power device10.1007/s10854-018-8903-9 ↗
31. Bonding strength of multiple SiC die attachment prepared by sintering of Ag nanoparticles10.1016/j.jmatprotec.2014.08.002 ↗
32. A statistical distribution function of wide applicability10.1115/1.4010337 ↗
33. Highly strong interface in Ag/Si sintered joints obtained through Ag2O–Ag composite paste10.1016/j.msea.2023.144647 ↗
34. Fast preparation of printable highly conductive polymer nanocomposites by thermal decomposition of silver carboxylate and sintering of silver nanoparticles10.1021/am100456m ↗
35. A review of watershed implementations for segmentation of volumetric images10.3390/jimaging8050127 ↗
36. Introducing high efficiency image detector to X-ray imaging tomography10.1088/1742-6596/849/1/012051 ↗
37. Microscale tensile test of galvannealed steel/aluminum dissimilar joint for estimation of intrinsic interfacial strength10.1016/j.scriptamat.2020.05.022 ↗
38. Surface self-diffusion of silver in various atmospheres10.1016/0001-6160(65)90199-9 ↗
39. Hillock formation, hole growth and agglomeration in thin silver films10.1016/0040-6090(80)90244-8 ↗
40. Effect of oxygen on microstructural coarsening behaviors and mechanical properties of Ag sinter paste during high-temperature storage from macro to micro10.1016/j.jallcom.2020.155173 ↗
41. Effectiveness of oxygen during sintering of silver thin films derived by nanoparticle ink10.3390/nano12111908 ↗
42. Effects of oxygen adsorption on morphological evolution of epitaxial Ag island films grown on Si10.3938/jkps.76.1071 ↗
43. Ultrathin metal films and particles on oxide surfaces: structural, electronic and chemisorptive properties10.1039/ft9969201435 ↗
44. Metal deposits on well-ordered oxide films10.1016/S0079-6816(99)00012-X ↗
45. Oxygen-induced giant grain growth in Ag films10.1063/1.4998741 ↗
46. Ultrathin silver film electrodes with ultralow optical and electrical losses for flexible organic photovoltaics10.1021/acsami.8b08578 ↗
47. Insights into effects of O-incorporated Ag nanoparticles as wetting seeds toward improving Ag wetting on oxides10.1016/j.apsusc.2021.150135 ↗
48. Establishing substoichiometric Ag oxidation and its physicochemical, optoelectrical, and structural consequences for Ag electrodes10.1021/acsaelm.2c00888 ↗
49. Fracture dominant in friction stir spot welded joint between 6061 aluminum alloy and galvannealed steel based on microscale tensile testing10.1016/j.matdes.2021.110344 ↗