journal article·2025-02Open access

Effects of recovery and phase transformation on the recrystallization kinetics of Ti-6Al-4V during β-processing

Franz Miller Branco Ferraz, Ricardo Henrique Buzolin, Fernando Warchomicka, Talina Terrazas-Monje, Stefan Ebenbauer, Thomas Leitner, Alfred Krumphals, Maria Cecilia Poletti

Abstract

This work unifies the description of microstructure evolution during dynamic and static recrystallization of Ti-6Al-4V in a single model. The developed model incorporates the role of dislocation interactions on the phenomenological concepts of dynamic and static recovery, continuous dynamic and static recrystallization, nucleation rate, and grain growth. The β-grain elongation during hot compression and the role of the deformed prior β-grain size on the number of potential nucleation sites are considered to visualize the influence of the initial grain size before deformation on the kinetics of static recrystallization. The model is calibrated and validated with experimental data from Ti-6Al-4V samples thermomechanically treated in the β-domain. Finally, the model is implemented as subroutines into the commercial FEM-based software DEFORM™ 2D. The proposed model accurately predicts I) the flow behavior and grain refinement during supertransus deformation, II) the influence of initial grain size, temperature, and deformation rate on the static recrystallization kinetics, and III) the grain growth kinetics. Simulations of hot forming followed by isothermal heat treatment and continuous cooling show that the Zener drag effect due to the formation of the α-phase has a greater influence on the kinetics of β-recrystallization than the cooling rate itself.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Constitutive modeling and microstructure research on the deformation mechanism of Ti-6Al-4V alloy under hot forming condition10.1016/j.jallcom.2021.162128 ↗
2. Unified description of the softening behavior of beta-metastable and alpha+beta titanium alloys during hot deformation10.1016/j.msea.2015.10.109 ↗
3. Unveiling the dynamic softening mechanism via micromechanical behavior for a near-β titanium alloy deformed at a high strain rate10.1016/j.jmrt.2023.09.150 ↗
4. The role of β phase in the morphology evolution of α lamellae in a dual-phase titanium alloy during high temperature compression10.1016/j.jallcom.2022.164901 ↗
5. Study on hot deformation behavior of as-cast Ti-5Al-5Mo-5 V-1Cr-1Fe titanium alloy in (α + β) phase region
6. A CDRX-based material model for hot deformation of aluminium alloys
7. Continuous dynamic recrystallization (CDRX) model for aluminum alloys10.1007/s10853-017-1845-4 ↗
8. Modeling of continuous dynamic recrystallization of Al-Zn-Cu-Mg alloy during hot deformation based on the internal-state-variable (ISV) method10.1016/j.ijplas.2018.03.002 ↗
9. A model of continuous dynamic recrystallization10.1016/S1359-6454(03)00078-8 ↗
10. Improved predictability of microstructure evolution during hot deformation of titanium alloys10.3390/ma13245678 ↗
11. Microstructural insights into creep of Ni-based alloy 617 at 700 °C provided by electron microscopy and modelling
12. Recrystallization of single-phase alloys
13. In-situ synchrotron X-ray diffraction of Ti-6Al-4V during thermomechanical treatment in the beta field10.3390/met9080862 ↗
14. A new topological approach for the mean field modeling of dynamic recrystallization10.1016/j.matdes.2018.03.011 ↗
15. A mean-field model of static recrystallization considering orientation spreads and their time-evolution10.1016/j.actamat.2020.08.013 ↗
16. A unified static and dynamic recrystallization Internal State Variable (ISV) constitutive model coupled with grain size evolution for metals and mineral aggregates10.1016/j.ijplas.2018.08.009 ↗
17. Modelling the relationship between deformed microstructures and static recrystallization textures: application to ferritic stainless steels10.1016/j.actamat.2021.117226 ↗
18. Mechanical behavior of Ti–6Al–4V at high and moderate temperatures—Part II: constitutive modeling10.1016/S0921-5093(01)01508-8 ↗
19. Topological aspects in the microstructural evolution of AA6082 during hot plastic deformation
20. Static recrystallization simulations starting from predicted deformation microstructure by coupling multi-phase-field method and finite element method based on crystal plasticity10.1016/j.ijmecsci.2009.09.037 ↗
21. Modeling of static recrystallization kinetics by coupling crystal plasticity FEM and multiphase field calculations
22. Phase-field model during static recrystallization based on crystal-plasticity theory10.1007/s10820-007-9083-8 ↗
23. Mesoscopic modeling of austenite static recrystallization in a low carbon steel using a coupled simulation method10.1016/j.commatsci.2008.11.021 ↗
24. A unified theory of recovery, recrystallization and grain growth, based on the stability and growth of cellular microstructures - I. The basic model10.1016/S1359-6454(97)00070-0 ↗
25. A unified theory of recovery, recrystallization and grain growth, based on the stability and growth of cellular microstructures - II. The effect of second-phase particles10.1016/S1359-6454(97)00173-0 ↗
26. A novel approach to model static recrystallization of austenite during hot rolling of Nb microalloyed steel. Part I: precipitate-free case10.1007/s11661-012-1526-5 ↗
27. Modeling static recrystallization in Al-Mg alloys10.1007/s11661-020-06100-9 ↗
28. A model for static recrystallization with simultaneous precipitation and solute drag10.1007/s11661-016-3524-5 ↗
29. Microstructure evolution in a 6082 aluminium alloy during thermomechanical treatment10.3390/ma11081319 ↗
30. Refinement of the Ti-17 microstructure after hot deformation: coupled mesoscale model
31. Microstructure evolution during hot deformation of Ti-6Al-4V double cone specimens10.1007/s12289-010-0745-9 ↗
32. Hogrefe · 2019
33. Using JMatPro to model materials properties and behavior10.1007/s11837-003-0013-2 ↗
34. The radial temperature gradient in the Gleeble® hot-torsion test and its effect on the interpretation of plastic-flow behavior10.1007/s11661-017-4296-2 ↗
35. The adiabatic correction factor for deformation heating during the uniaxial compression test10.1361/105994901770344593 ↗
36. Refinement of α′ martensite by oxygen in selective laser melted Ti–6Al–4V10.1007/s40195-023-01657-x ↗
37. Phase transformations during cooling in alpha + beta titanium alloys10.1016/S0921-5093(97)00802-2 ↗
38. A predictive mesoscale model for continuous dynamic recrystallization
39. Austenite reconstruction elucidates prior grain size dependence of toughness in a low alloy steel10.1007/s11661-018-4825-7 ↗
40. A comprehensive mean-field approach to simulate the microstructure during the hot forming of Ti-17
41. Dislocation density evolution and interactions in crystalline materials10.1016/j.actamat.2011.08.041 ↗
42. A dislocation-based multi-rate single crystal plasticity model10.1016/j.ijplas.2012.12.006 ↗
43. Mesoscale cyclic crystal plasticity with dislocation substructures10.1016/j.ijplas.2017.06.002 ↗
44. Problems of plastic gliding10.1088/0959-5309/52/1/303 ↗
45. Dislocation model for creep in engineering materials
46. The mobility and migration of boundaries
47. Hot deformation and dynamic α-globularization of a Ti-17 alloy: consistent physical model
48. A dislocation-based model for the microstructure evolution and the flow stress of a Ti5553 alloy
49. A dislocation model for creep in engineering materials
50. Work hardening in heterogeneous alloys - a microstructural approach based on three internal state variables10.1016/S1359-6454(00)00289-5 ↗
51. Dislocation density based model for plastic deformation and globularization of Ti-6Al-4V10.1016/j.ijplas.2013.04.003 ↗
52. Shahryari · 2023
53. A reconsideration of some embedded Runge-Kutta formulae10.1016/0377-0427(86)90027-0 ↗
54. Determination of strain-hardening characteristics by torsion testing
55. Microstructural evolution of a Ti-6Al-4V alloy during β-phase processing: experimental and simulative investigations10.1016/j.msea.2003.09.024 ↗
56. Optimising compression testing for strain uniformity to facilitate microstructural assessment during recrystallisation
57. Behaviour of normal grain growth kinetics in single phase titanium and titanium alloys10.1016/S0921-5093(00)00731-0 ↗
58. Introduction
59. An analysis on the constitutive models for forging of Ti6Al4V alloy considering the softening behavior10.1007/s11665-018-3402-y ↗
60. Buzolin · 2020