journal article·2024-11Open access

The role of processing temperature for achieving superplastic properties in an Al-3Mg-0.2Sc alloy processed by high-pressure torsion

Pedro Henrique R. Pereira, Piotr Bazarnik, Yi Huang, Malgorzata Lewandowska, Terence G. Langdon

Abstract

Experiments were conducted to systematically assess the superplastic properties and the microstructural changes of an Al-3Mg-0.2Sc alloy processed by 10 HPT revolutions at room temperature (RT ≈ 300 K) or at 450 K after subsequent tensile testing at temperatures from 473 to 723 K over a wide range of strain rates. The HPT processing at RT led to the development of elongated grains with an average size of ~140 nm whereas the grain structures were equiaxed and slightly larger (~150 nm) after HPT at 450 K. After HPT processing at RT, the Al-Mg-Sc alloy exhibited true superplastic flow at low homologous temperatures and attained a maximum elongation of ~850 % at 523 K. Nevertheless, the elongations decreased at temperatures T ≥ 623 K and an elongation higher than 400 % was only achieved at 673 K for a strain rate of
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (97)

Show source-provided references
1. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
2. Twenty-five years of ultrafine-grained materials: achieving exceptional properties through grain refinement10.1016/j.actamat.2013.08.018 ↗
3. Nanomaterials by severe plastic deformation: review of historical developments and recent advances10.1080/21663831.2022.2029779 ↗
4. Valiev · 2024
5. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
6. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
7. A review on high-pressure torsion (HPT) from 1935 to 198810.1016/j.msea.2015.11.074 ↗
8. Technical parameters affecting grain refinement by high pressure torsion10.3139/146.110224 ↗
9. Finite element modelling of high-pressure torsion: an overview10.2320/matertrans.MF201906 ↗
10. The processing of difficult-to-work alloys by ECAP with an emphasis on magnesium alloys10.1016/j.actamat.2007.04.043 ↗
11. Modeling the temperature rise in high-pressure torsion10.1016/j.msea.2013.11.015 ↗
12. Effect of temperature rise on microstructural evolution during high-pressure torsion10.1016/j.msea.2017.12.095 ↗
13. Orientation imaging microscopy of ultrafine-grained nickel10.1016/S1359-6462(02)00018-0 ↗
14. Experimental parameters influencing grain refinement and microstructural evolution during high-pressure torsion10.1016/S1359-6454(02)00466-4 ↗
15. A comparison of microstructures and mechanical properties in a Cu–Zr alloy processed using different SPD techniques10.1007/s10853-012-7072-0 ↗
16. A unified approach to grain boundary sliding in creep and superplasticity10.1016/0956-7151(94)90322-0 ↗
17. Observations of high strain rate superplasticity in commercial aluminum alloys with ultrafine grain sizes10.1016/S1359-6462(97)00387-4 ↗
18. Superplastic forming at high strain rates after severe plastic deformation10.1016/S1359-6454(00)00182-8 ↗
19. Superplastic forming 40 Years and still growing10.1007/s11665-007-9076-5 ↗
20. Advances in superplasticity from a laboratory curiosity to the development of a superplastic forming industry10.3390/met12111921 ↗
21. Influence of scandium and zirconium on grain stability and superplastic ductilities in ultrafine-grained Al-Mg alloys10.1016/S1359-6454(01)00368-8 ↗
22. Microstructure of severely deformed Al-3Mg and its evolution during annealing10.1016/S1359-6454(02)00203-3 ↗
23. Effect of Sc and Zr additions on grain stability and superplasticity of the simple thermal–mechanical processed Al–Zn–Mg alloy sheet10.1016/j.msea.2015.09.049 ↗
24. Thermal stability and superplastic behaviour of an Al-Mg-Sc alloy processed by ECAP and HPT at different temperatures10.1088/1757-899X/194/1/012013 ↗
25. Flow behaviour and microstructural stability in an Al-3Mg-0.2Sc alloy processed by high-pressure torsion at different temperatures10.1016/j.msea.2023.145766 ↗
26. Nanoscale structural evolution of Al3Sc precipitates in Al(Sc) alloys10.1016/S1359-6454(01)00116-1 ↗
27. Scandium in aluminium alloys10.1179/174328005X14311 ↗
28. Kinetics and mechanisms of precipitation in an Al-0.2wt.% Sc alloy10.1016/j.msea.2005.02.015 ↗
29. Composition evolution of nanoscale Al3Sc precipitates in an Al-Mg-Sc alloy: experiments and computations10.1016/j.actamat.2005.08.035 ↗
30. The defining role of initial microstructure and processing temperature on microstructural evolution, hardness and tensile response of Al-Mg-Sc-Zr (AA5024) alloy processed by high pressure torsion10.1016/j.jallcom.2021.163548 ↗
31. An examination of the superplastic characteristics of Al–Mg–Sc alloys after processing10.1557/jmr.2017.286 ↗
32. New Al–Mg–Sc alloys10.1016/S0921-5093(99)00673-5 ↗
33. An evaluation of the flow behavior during high strain rate superplasticity in an Al-Mg-Sc alloy
34. Superplastic behavior and microstructure evolution in a commercial Al-Mg-Sc alloy subjected to intense plastic straining10.1007/s11661-006-0218-4 ↗
35. High strain rate superplasticity in an Al-Mg-Sc-Zr alloy subjected to simple thermomechanical processing10.1016/j.scriptamat.2006.03.020 ↗
36. Extraordinary high-strain rate superplasticity of severely deformed Al–Mg–Sc–Zr alloy10.1016/j.msea.2012.01.041 ↗
37. Superplasticity of ultrafine-grained Al–Mg–Sc–Zr alloy10.1016/j.msea.2016.08.074 ↗
38. Grain refinement and superplasticity in an aluminum alloy processed by high-pressure torsion10.1016/j.msea.2004.11.007 ↗
39. Dobatkin · 2006 · vol. 2006 · 533
40. Achieving exceptional superplasticity in a bulk aluminum alloy processed by high-pressure torsion10.1016/j.scriptamat.2008.01.043 ↗
41. High-strain-rate superplasticity of nanocrystalline aluminum alloy 157010.1134/S106378500708007X ↗
42. Using ring samples to evaluate the processing characteristics in high-pressure torsion10.1016/j.actamat.2008.10.046 ↗
43. Exceptionally high strength and good ductility in an ultrafine-grained 316L steel processed by severe plastic deformation and subsequent annealing10.1016/j.matlet.2017.12.040 ↗
44. Influence of grain size on the flow properties of an Al-Mg-Sc alloy over seven orders of magnitude of strain rate10.1016/j.msea.2017.01.020 ↗
45. Developing grain refinement and superplasticity in a magnesium alloy processed by high-pressure torsion10.1016/j.msea.2007.12.046 ↗
46. Microstructural and mechanical characteristics of AZ61 magnesium alloy processed by high-pressure torsion10.2320/matertrans.ME200718 ↗
47. Examining the microhardness evolution and thermal stability of an Al–Mg–Sc alloy processed by high-pressure torsion at a high temperature10.1016/j.jmrt.2017.05.008 ↗
48. Influence of processing temperature on microhardness evolution, microstructure and superplastic behaviour in an Al–Mg alloy processed by high-pressure torsion10.1016/j.jmrt.2023.03.167 ↗
49. Using finite element modeling to examine the flow processes in quasi-constrained high-pressure torsion10.1016/j.msea.2011.07.040 ↗
50. Using finite element modelling to examine the flow process and temperature evolution in HPT under different constraining conditions10.1088/1757-899X/63/1/012041 ↗
51. Using finite element modeling to examine the temperature distribution in quasi-constrained high-pressure torsion10.1016/j.actamat.2012.02.027 ↗
52. The significance of strain reversals during processing by high-pressure torsion10.1016/j.msea.2008.08.021 ↗
53. Effect of aging on microstructural development in an Al-Mg-Si alloy processed by high-pressure torsion10.1007/s10853-012-6400-8 ↗
54. Mechanical properties and microstructural evolution of nanocrystalline titanium at elevated temperatures10.1016/j.msea.2016.05.105 ↗
55. Achieving superior grain refinement and mechanical properties in vanadium through high-pressure torsion and subsequent short-term annealing10.1016/j.msea.2015.12.086 ↗
56. An examination of the elastic distortions of anvils in high-pressure torsion10.1016/j.msea.2015.02.052 ↗
57. Examining the thermal stability of an Al-Mg-Sc alloy processed by high-pressure torsion10.1590/1980-5373-mr-2017-0207 ↗
58. The fabrication of graphene-reinforced Al-based nanocomposites using high-pressure torsion10.1016/j.actamat.2018.10.060 ↗
59. Seventy-five years of superplasticity: historic developments and new opportunities10.1007/s10853-009-3780-5 ↗
60. High-strain-rate superplasticity in metallic materials and the potential for ceramic materials10.2355/isijinternational.36.1423 ↗
61. Fracture processes in superplastic flow10.1179/030634582790427208 ↗
62. Review: achieving superplasticity in metals processed by high-pressure torsion10.1007/s10853-014-8204-5 ↗
63. Developing superplasticity and a deformation mechanism map for the Zn-Al eutectoid alloy processed by high-pressure torsion10.1016/j.msea.2011.04.053 ↗
64. Second paper on statistics associated with the random disorientation of cubes10.1093/biomet/45.1-2.229 ↗
65. An evaluation of the strain contributed by grain boundary sliding in superplasticity10.1016/0921-5093(94)91092-8 ↗
66. Effect of numbers of turns of high-pressure torsion on the development of exceptional ductility in pure magnesium10.1002/adem.201900565 ↗
67. Principles of superplasticity in ultrafine-grained materials10.1007/s10853-006-0954-2 ↗
68. Creep and superplasticity: evolution and rationalization10.1002/adem.201900532 ↗
69. Factors influencing ductility in the superplastic Zn-22 Pct Al eutectoid10.1007/BF02661575 ↗
70. The influence of strain rate on ductility in the superplastic Zn–22% Al eutectoid10.1080/14786437508228105 ↗
71. Humphreys · 2004
72. A unified theory of recovery, recrystallization and grain growth, based on the stability and growth of cellular microstructures - II. The effect of second-phase particles10.1016/S1359-6454(97)00173-0 ↗
73. Polycrystalline plasticity and the evolution of crystallographic texture in FCC metals
74. Relative grain translations in the plastic flow of aluminium
75. Identifying creep mechanisms in plastic flow10.3139/146.101066 ↗
76. On the measurements of superplasticity in an Al-Cu alloy10.1007/BF02667294 ↗
77. The mechanical properties of superplastic materials10.1007/BF02642383 ↗
78. Creep at low stress levels in the superplastic Zn-22% Al eutectoid10.1016/0001-6160(75)90076-0 ↗
79. Flow mechanisms in ultrafine-grained metals with an emphasis on superplasticity10.1016/j.msea.2011.05.005 ↗
80. Review: achieving superplastic properties in ultrafine-grained materials at high temperatures10.1007/s10853-015-9176-9 ↗
81. Deformation mechanism maps based on grain size10.1007/BF02644014 ↗
82. Using X-ray microtomography to evaluate cavity formation in a superplastic magnesium alloy processed by equal-channel angular pressing10.1016/j.actamat.2010.06.049 ↗
83. Bird, Mukherjee, Dorn, In: Brandon, Rosen, Quantitative Relation between Properties and Microstructure, Israel Universities Press, Jerusalem, Israel, 1969, pp. 255–342.
84. High strain rate behavior of ultrafine-grained Al-1.5 Mg10.1016/j.msea.2008.05.043 ↗
85. Seventy years of Hall-Petch, ninety years of superplasticity and a generalized approach to the effect of grain size on flow stress10.1016/j.pmatsci.2023.101131 ↗
86. Deformation mechanisms in ultrafine-grained metals with an emphasis on the Hall-Petch relationship and strain rate sensitivity10.1016/j.jmrt.2021.06.016 ↗
87. Influence of specimen dimensions on the tensile behavior of ultrafine-grained Cu10.1016/j.scriptamat.2008.05.031 ↗
88. Influence of specimen dimensions and strain measurement methods on tensile stress–strain curves10.1016/j.msea.2009.06.031 ↗
89. Ultrahigh high-strain-rate superplasticity in a nanostructured high-entropy alloy10.1038/s41467-020-16601-1 ↗
90. New developments in the processing of metallic alloys for achieving exceptional superplastic properties10.21741/9781644902615-1 ↗
91. Microstructural evolution and tensile testing of a Bi–Sn (57/43) alloy processed by tube high-pressure shearing10.3390/cryst11101229 ↗
92. Principles of severe plastic deformation using tube high-pressure shearing10.1016/j.scriptamat.2012.07.028 ↗
93. Developing high-pressure torsion for use with bulk samples10.1016/j.msea.2005.06.049 ↗
94. Optimizing the procedure of equal-channel angular pressing for maximum superplasticity10.1016/S0921-5093(00)01255-7 ↗
95. Microtexture analysis of restoration mechanisms during high pressure torsion of pure nickel10.1016/j.msea.2016.12.032 ↗
96. Transition from thermally assisted to mechanically driven boundary migration and related apparent activation energies10.1016/j.scriptamat.2018.05.052 ↗
97. Saturation of grain refinement during severe plastic deformation of single phase materials: reconsiderations, current status and open questions10.2320/matertrans.MF201918 ↗