Spall fracture in wrought and additively manufactured Ni-based superalloys subjected to high pressure laser-driven shocks
Source abstract
Abstract
The impact response of Nickel-based superalloys is still poorly documented with respect to the industrial interest in these materials. Here, laser-driven shocks are used to study and compare the dynamic behavior of Rene 65 superalloy with different microstructures at very high strain rates in the order of 106 s−1. Rene 65 specimens studied here are either in cast and wrought or additively manufactured (laser powder bed fusion) and subjected to different heat treatment conditions. Time-resolved velocity measurements provide the yield strength (Hugoniot elastic limit) and spall strength (resistance to dynamic tension) of each variant. In addition, post-recovery characterization gives insight into the initiation and propagation of dynamic fracture, which are shown to depend on the different manufacturing routes and thermal histories.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Temperature Alloys and Creep · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Donachie · 2002
2. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties10.2514/1.18239 ↗
3. Reed · 2006
4. Development of a new cast and wrought alloy (René 65) for high temperature disk applications
5. High temperature fatigue of nickel-base superalloys – a review with special emphasis on deformation modes and oxidation10.1016/j.engfailanal.2009.01.010 ↗
6. Thermal stability of cast and wrought alloy rene 65
7. Crack initiation sensitivity of wrought direct aged alloy 718 in the very high cycle fatigue regime: the role of non-metallic inclusions10.1016/j.msea.2016.09.098 ↗
8. An experimental and numerical study of ductile failure under quasi-static and impact loadings of Inconel 718 nickel-base superalloy10.1016/j.ijimpeng.2014.02.007 ↗
9. Anomalous behaviors of a single-crystal Nickel-base superalloy over a wide range of temperatures and strain rates10.1016/j.mechmat.2015.11.015 ↗
10. Effects of shock loading on a solid-solution strengthened superalloy
11. Dynamic impact response and microstructural evolution of inconel 690 superalloy at elevated temperatures10.1016/j.ijimpeng.2004.09.007 ↗
12. Impact strength properties of nickel-based refractory superalloys at normal and elevated temperatures10.1016/j.ijimpeng.2003.11.004 ↗
13. Dynamic response of wrought and additively manufactured Nickel-based alloys to high velocity impacts of laser-launched flyers10.1063/5.0085285 ↗
14. Effects of heat treatment on the ballistic impact properties of Inconel 718 for jet engine fan containment applications10.1016/S0734-743X(01)00018-5 ↗
15. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
16. Review of selective laser melting: materials and applications10.1063/1.4935926 ↗
17. A brief review on the manufacturing of metal components using selective laser melting
18. The metallurgy and processing science of metal additive manufacturing10.1080/09506608.2015.1116649 ↗
19. Microstructure and mechanical properties of rene 41 alloy manufactured by laser powder bed fusion10.1016/j.msea.2019.138849 ↗
20. Alloys-by-design: application to new superalloys for additive manufacturing10.1016/j.actamat.2020.09.023 ↗
21. Direct laser metal deposition (DLMD) additive manufacturing (AM) of Inconel 718 superalloy: elemental, microstructural and physical properties evaluation10.1016/j.ijleo.2022.169018 ↗
22. Spall fracture in additive manufactured Ti-6Al-4V10.1063/1.4963279 ↗
23. Dynamic response of AlSi10Mg alloy fabricated by selective laser melting10.1016/j.msea.2017.02.004 ↗
24. On the dynamic response of additively manufactured 316L10.1063/1.5044804 ↗
25. Improved dynamic impact behaviour of wire-arc additive manufactured ATI 718Plus10.1016/j.msea.2018.09.079 ↗
26. Structure/property characterization of spallation in wrought and additively manufactured tantalum
27. Analysis and constitutive modelling of high strain rate deformation behaviour of wire–arc additive-manufactured ATI 718Plus superalloy10.1007/s00170-019-03616-2 ↗
28. Effects of additive manufacturing on the dynamic response of AlSi10Mg to laser shock loading10.1016/j.msea.2019.02.001 ↗
29. Ganzenmüller · 2022
30. Dynamic behavior of a shock-loaded Ni-based superalloy manufactured by laser metal deposition
31. Impact of the solution cooling rate and of thermal aging on the creep properties of the new cast & wrought rené 65 Ni-based superalloy
32. Assessment of specific contribution of residual stress generated near surface anomalies in the high temperature fatigue life of a René 65 superalloy: effect of Surface Anomalies on the Fatigue Life of a René 65 Superalloy10.1111/ffe.12475 ↗
33. Comparison of the stress relaxation and creep behavior of conventionally forged and additively manufactured René 6510.1007/s10853-023-08399-2 ↗
34. High temperature oxidation of additively manufactured Rene 6510.1016/j.corsci.2023.111273 ↗
35. Ejection of spalled layers from laser shock-loaded metals10.1063/1.3500317 ↗
36. Microjetting from grooved surfaces in metallic samples subjected to laser driven shocks10.1063/1.4863719 ↗
37. Laser interferometer for measuring high velocities of any reflecting surface10.1063/1.1660986 ↗
38. Absolute equation of state measurements of iron using laser driven shocks10.1063/1.1478557 ↗
39. Temperature and melting of laser-shocked iron releasing into an LiF window10.1063/1.1896375 ↗
40. The spall strength of condensed matter10.1016/0022-5096(88)90015-4 ↗
41. Antoun · 2003
42. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
43. Engineering science aspects of the Hall–Petch relation10.1007/s00707-013-1048-2 ↗
44. Influence of grain size on tensile and stress rupture behavior of an advanced wrought Ni-based superalloy
45. Grain distribution characteristics and effect of diverse size distribution on the Hall–Petch relationship for additively manufactured metal alloys10.1016/j.jmrt.2022.09.006 ↗
46. Tensile strengthening in the nickel-base superalloy IN738LC10.1361/105994900770345999 ↗
47. Investigation on the microstructure and tensile behavior of a Ni-based IN792 superalloy10.1177/1687814017752167 ↗
48. On the prediction of the yield stress of unimodal and multimodal γ ′ Nickel-base superalloys10.1016/j.actamat.2015.07.048 ↗
49. Tensile behavior of a new single crystal nickel-based superalloy (CMSX-4) at room and elevated temperatures10.1007/BF02645265 ↗
50. Microstructure and mechanical properties of a nickel-base superalloy heavily alloyed with substitution elements10.1088/1757-899X/1008/1/012008 ↗
51. Temperature-dependent yield strength and deformation mechanism of a casting Ni-based superalloy containing low volume-fraction γ′ phase10.1016/j.jallcom.2022.164187 ↗
52. Spall fracture: methodological aspects, mechanisms and governing factors10.1007/s10704-009-9438-0 ↗
53. Evaluation of allvac 718Plus alloy in the cold worked and heat treated condition