Characterization of the strain rate sensitivity of basal, prismatic and pyramidal slip in Zircaloy-4 using micropillar compression
Source abstract
Abstract
The slip strength of individual slip systems at different strain rates will control the mechanical response and strongly influence the anisotropy of plastic deformation. In this work, the slip activity and strain rate sensitivity of the basal, prismatic, and pyramidal slip systems are explored by testing at variable strain rates (from 10E-4 s^-1 to 125 s^-1) using single crystal micropillar compression tests. These systematic experiments enable the direct fitting of the strain rate sensitivities of the different slips using a simple analytical model and this model reveals that deformation in polycrystals will be accommodated using different slip systems depending on the strain rate of deformation in addition to the stress state (i.e. Schmid's law). It was found that the engineering yield stress increases with strain rate, and this varied by slip systems. Activation of the prismatic slip system results in a high density of parallel, clearly discrete slip planes, while the activation of the pyramidal slip leads to the plastic collapse of the pillar, leading to a 'mushroom' morphology of the deformed pillar. This characterization and model provide insight that helps inform metal forming and understanding of the mechanical performance of these engineering alloys in the extremes of service conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · High-Velocity Impact and Material Behavior · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Variable temperature micropillar compression to reveal basal slip properties of Zircaloy-410.1016/j.scriptamat.2018.12.014 ↗
2. Hydrogen-enhanced degradation and oxide effects in zirconium alloys for nuclear applications10.1016/j.ijhydene.2011.04.002 ↗
3. Hydride formation on deformation twin in zirconium alloy10.1016/j.jnucmat.2016.10.020 ↗
4. Microstructure of Zircaloy-4 alloy during β phase quenching and determination of critical quenching diameter of its rods10.1016/j.nme.2018.10.014 ↗
5. Effect of hydride precipitation on the fatigue cracking behavior in a zirconium alloy cladding tube10.1016/j.ijfatigue.2019.105230 ↗
6. On the mechanistic basis of deformation at the microscale in hexagonal close-packed metals
7. Dimensional accuracy of tubes in cold pilgering10.1016/j.jmatprotec.2016.01.001 ↗
8. Strain rate and temperature effects on the selection of primary and secondary slip and twinning systems in HCP Zr10.1016/j.actamat.2015.01.037 ↗
9. Finite strain crystal plasticity-phase field modeling of twin, dislocation, and grain boundary interaction in hexagonal materials
10. High strain rate tension and compression tests
11. High rates and impact experiments10.1007/978-0-387-30877-7_33 ↗
12. Nanomechanical testing at high strain rates: new instrumentation for nanoindentation and microcompression10.1016/j.matdes.2018.03.050 ↗
13. Sample dimensions influence strength and crystal plasticity10.1126/science.1098993 ↗
14. In situ small-scale mechanical testing under extreme environments10.1557/mrs.2019.126 ↗
15. Microscale high-cycle fatigue testing by dynamic micropillar compression using continuous stiffness measurement10.1007/s11340-017-0362-3 ↗
16. Micropillar compression of ceramics at elevated temperatures10.1016/j.scriptamat.2009.01.029 ↗
17. Cryogenic in situ microcompression testing of Sn10.1016/j.actamat.2014.06.026 ↗
18. Prismatic slip in zirconium single crystals at elevated temperatures10.1007/BF02658531 ↗
19. Temperature insensitivity of the flow stress in body-centered cubic micropillar crystals10.1016/j.actamat.2016.02.008 ↗
20. Prismatic-to-Basal plastic slip transition in zirconium
21. High strain rate testing at the nano-scale: a proposed methodology for impact nanoindentation10.1016/j.matdes.2018.04.045 ↗
22. High strain rate compression of epoxy micropillars10.1016/j.eml.2020.100905 ↗
23. Effects of the initial dislocation density on size effects in single-crystal magnesium10.1016/j.actamat.2013.03.019 ↗
24. Size-induced strengthening in nanostructured Mg alloy micropillars10.1080/21663831.2014.924164 ↗
25. Microcompression study of Mg (0 0 0 1) single crystal10.1016/j.scriptamat.2009.12.048 ↗
26. Micropillar and macropillar compression responses of magnesium single crystals oriented for single slip or extension twinning10.1016/j.actamat.2013.10.073 ↗
27. In situ TEM compression testing of Mg and Mg-0.2 wt.% Ce single crystals10.1016/j.scriptamat.2010.09.047 ↗
28. Size effects in strength and plasticity of single-crystalline titanium micropillars with prismatic slip orientation10.1016/j.scriptamat.2011.05.033 ↗
29. Local strain rate sensitivity of single α phase within a dual-phase Ti alloy10.1016/j.actamat.2016.01.057 ↗
30. Local deformation mechanisms of two-phase Ti alloy10.1016/j.msea.2015.09.016 ↗
31. Intrinsic anisotropy of strain rate sensitivity in single crystal alpha titanium10.1016/j.actamat.2016.07.044 ↗
32. Microstructural heterogeneity in rate-dependent plasticity of multiphase titanium alloys10.1016/j.jmps.2017.03.012 ↗
33. In situ micropillar deformation of hydrides in Zircaloy-410.1016/j.actamat.2015.03.037 ↗
34. Compression of zirconium single crystals parallel to the c-axis10.1016/0022-3115(73)90189-X ↗
35. Evolution of deformation twinning mechanisms in magnesium from low to high strain rates10.1016/j.matdes.2022.110646 ↗
36. (a) Prismatic, (a) basal, and (c+a) slip strengths of commercially pure Zr by micro-cantilever tests10.1016/j.actamat.2015.06.020 ↗
37. Formation of very large ‘blocky alpha’ grains in Zircaloy-410.1016/j.actamat.2017.03.002 ↗
38. Optimizing broad ion beam polishing of zircaloy-4 for electron backscatter diffraction analysis10.1016/j.micron.2022.103268 ↗
39. A novel pole figure inversion method: specification of the MTEX algorithm10.1107/S0021889808030112 ↗
40. Cold dwell fatigue analyses integrating crystal-level strain rate sensitivity and microstructural heterogeneity10.1016/j.ijfatigue.2021.106398 ↗
41. Thermodynamic analysis of dislocation glide controlled by dispersed local obstacles10.1016/0025-5416(69)90026-3 ↗
42. Lengthscale-dependent, elastically anisotropic, physically-based hcp crystal plasticity: application to cold-dwell fatigue in Ti alloys10.1016/j.ijplas.2006.10.013 ↗
43. Characterisation and modelling of micro- and macroscale creep and strain rate sensitivity in Zircaloy-410.1016/j.msea.2022.142981 ↗
44. Effects of high rates of loading on the deformation behavior and failure mechanisms of hexagonal close-packed metals and alloys10.1007/s11661-002-0162-x ↗
45. Colossal grain growth yields single-crystal metal foils by contact-free annealing10.1126/science.aao3373 ↗
46. Grain structure control during metal 3D printing by high-intensity ultrasound10.1038/s41467-019-13874-z ↗