journal article·2024-05Open access

Effect of Cr content on thermally activated deformation in single-crystal micropillars of Fe–Cr binary alloys

Tianqi Zhu, Naoki Takata, Dasom Kim, Makoto Kobashi, Masataka Yoshino, Motoyuki Tsukamura

Abstract

This study identifies the role of solute Cr in the thermal activation process in the plastic deformation of α-(Fe, Cr) ferrite (BCC solid solutions) using micropillar compression tests for micron-sized single-crystals fabricated on various Fe-Cr binary alloys that were solution-treated at 1573 K. Fe-18%Cr single-crystal micropillars with a mean diameter d of ∼2 μm exhibited a relatively higher strain rate sensitivity (m) of 0.12 for the stress required for slip initiation. Larger Fe-18%Cr micropillars (d = 5 μm) exhibited a lower m value of 0.04. The corresponding activation volume of 50 b3 was equivalent to the millimeter-sized pure Fe and Fe-18%Cr alloy specimens (60–70 b3), indicating the prevalence of a general mechanism involving dislocation motion (kink-pair nucleation of screw dislocations). This mechanism controls the thermal activation process of plastic deformation in the Fe-18%Cr alloy, which has sufficient sources for dislocation multiplication. In the Fe-25%Cr and Fe-40%Cr single crystal micropillars, a less pronounced size-dependent m value (0.01–0.03) was determined, almost independent of specimen size. The corresponding activation volumes of large micropillars (74–77 b3) were similar to those of millimeter-sized specimens, which indicates a mild effect of solute Cr atoms on the thermal activation process of dislocation motion in Fe-Cr binary alloys at ambient temperature. Initial dislocations, rather than Cr content in Fe-Cr binary alloys, led to the low changes in size-dependent activation volume of Fe-Cr alloys with higher Cr content. Planar faults (Cr-enriched regions) were observed in Fe-40%Cr alloys, which may become sufficient sources for dislocation nucleation. However, the influence of Cr-enriched regions on dislocation motion remains unclear.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Ferritic stainless steels in structural applications10.1016/j.tws.2014.03.014 ↗
2. Wright · 1980 · 2
3. Metallic interconnects for solid oxide fuel cells10.1016/j.msea.2005.02.047 ↗
4. Metallic interconnectors for solid oxide fuel cells - a review
5. Effect of chromium content on the corrosion resistance of ferritic stainless steels in sulfuric acid solution10.1016/j.heliyon.2018.e00958 ↗
6. Embrittlement and adding at 475 °C in an experimental ferritic stainless steel containing 38 wt.% chromium10.1016/0921-5093(94)09731-3 ↗
7. Effect of σ-phase embrittlement on fatigue behaviour in high-chromium ferritic stainless steel10.1016/j.proeng.2010.03.030 ↗
8. Phase equilibria and thermodynamic properties in the Fe-Cr system10.1080/10408431003788472 ↗
9. Second-phase particles in ferritic stainless steels containing 40% chromium10.1016/1044-5803(92)90037-I ↗
10. Influence of spinodal decomposition structures on the strength of Fe-Cr alloys: a dislocation dynamics study10.1016/j.actamat.2017.12.051 ↗
11. Towards high-strength, high-ductility ferritic steels: pathways to overcome the “475 ◦C embrittlement” in spinodally decomposed Fe-40Cr alloy10.1016/j.actamat.2023.119355 ↗
12. Comparison between SANS and APT measurements in a thermally aged Fe-19 at.%Cr alloy10.1016/j.matchar.2019.03.027 ↗
13. Thermally decomposed vinary Fe–Cr alloys: toward a quantitative relationship between strength and structure10.1002/adem.202270010 ↗
14. The size of a dislocation10.1088/0959-5309/52/1/305 ↗
15. Dislocations in a simple cubic lattice10.1088/0959-5309/59/2/309 ↗
16. Micro-compression studies of face-centered cubic and body-centered cubic high-entropy alloys: size-dependent strength, strain rate sensitivity, and activation volumes
17. Argon · 2012 · 94
18. Theory of double-kink nucleation in dilute BCC alloys10.1016/j.actamat.2020.07.008 ↗
19. Effect of Cr atoms on the formation of double kinks in screw dislocations in Fe and its correlation with solute hardening and softening in Fe–Cr alloys10.1016/j.commatsci.2008.01.072 ↗
20. Study of the deformation mechanisms in a Fe-14% Cr ODS alloy10.1016/j.jnucmat.2011.10.046 ↗
21. Effect of added stabilizing elements on thermal activation process of plastic deformation in 18Cr ferritic stainless steel10.1016/j.msea.2021.141866 ↗
22. Temperature dependence of activation volume on Cu content of ultra-low carbon steel10.1080/14786435.2017.1359423 ↗
23. Sample dimensions influence strength and crystal plasticity10.1126/science.1098993 ↗
24. Crystal structures and mechanical properties of Fe-Zn intermetallic compounds formed in the coating layer of galvannealed steels10.2355/isijinternational.ISIJINT-2018-066 ↗
25. Overview on micro- and nanomechanical testing: new insights in interface plasticity and fracture at small length scales10.1016/j.actamat.2017.06.019 ↗
26. Anomalous size-dependent strength in micropillar compression deformation of commercial-purity aluminum single-crystals10.1016/j.msea.2019.138710 ↗
27. Influence of dislocation substructure on size-dependent strength of high-purity aluminum single-crystal micropillars10.2320/matertrans.MT-L2023004 ↗
28. Advanced nanoindentation testing for studying strain-rate sensitivity and activation volume10.1007/s11837-017-2536-y ↗
29. Nanoindentation strain-rate jump tests for determining the local strain-rate sensitivity in nanocrystalline Ni and ultrafine-grained Al10.1557/jmr.2011.156 ↗
30. Strain rate sensitivity of flow stress measured by micropillar compression test for single crystals of 18Cr ferritic stainless steel10.2355/isijinternational.ISIJINT-2019-448 ↗
31. Effect of solute Ni on thermal activation process of plastic deformation in Fe–18Cr single-crystal micropillars10.1016/j.msea.2022.144076 ↗
32. Thermal activation process of plastic deformation in Fe-18Cr single-crystal micropillars with high-density dislocations10.1016/j.msea.2021.141459 ↗
33. Effect of trace solute titanium on plastic deformation of α-(Fe, Cr) single-crystal micropillars fabricated from 18Cr ferritic stainless steel10.1016/j.msea.2020.140455 ↗
34. A structural study of the Fe-Cr system alloys10.1016/S1359-6454(96)00088-2 ↗
35. Alloys of Fe-Cr system: the relations between phase transitions “order-disorder” and “ordering-separation”10.1016/j.jallcom.2004.07.050 ↗
36. Influence of orientation on the size effect in bcc pillars with different critical temperatures10.1016/j.msea.2010.10.073 ↗
37. On the mechanical heterogeneity in dual phase steel grades: activation of slip systems and deformation of martensite in DP80010.1016/j.actamat.2019.11.002 ↗
38. Anomalous slip in high-purity niobium single crystals deformed at 77 °K in tension10.1080/14786437208220348 ↗
39. On the mechanism of anomalous slip in bcc metals10.1016/j.msea.2010.09.017 ↗
40. Theory of tensile test10.1016/0001-6160(67)90211-8 ↗
41. Hosford · 2005 · 99
42. Caillard · 2023 · 13
43. Deformation mechanism of [001] oriented Fe-30%Cr alloy single crystals10.2472/jsms.50.1223 ↗
44. Coupled size and temperature effects on intermittent plasticity of BCC micro-crystals10.1016/j.actamat.2023.119201 ↗
45. size- and strain rate-dependence of nickel and Ni–Co micropillars with varying stacking fault energy10.1016/j.msea.2020.140266 ↗
46. Dominating deformation mechanisms in ultrafine-grained chromium across length scales and temperatures10.1016/j.actamat.2017.08.043 ↗
47. Coupled size and temperature effects on intermittent plasticity of BCC micro-crystals10.1016/j.actamat.2023.119201 ↗
48. Micro-pillar plasticity controlled by dislocation nucleation at surfaces10.1080/14786435.2010.502141 ↗
49. Emergence of strain-rate sensitivity in Cu nanopillars: transition from dislocation multiplication to dislocation nucleation10.1016/j.actamat.2011.05.038 ↗
50. Humphreys · 2004 · 169
51. Nucleation of dislocations from [001] bicrystal interfaces in aluminum10.1016/j.actamat.2005.04.012 ↗
52. Emergence of strain-rate sensitivity in Cu nanopillars: transition from dislocation multiplication to dislocation nucleation10.1016/j.actamat.2011.05.038 ↗