Experimental investigation of creep crack growth behavior in the heat affected zone of boron added modified 9Cr–1Mo steel weld
Source abstract
Abstract
Abstract This study aims to quantify the improvement in the creep crack growth (CCG) resistance in the heat-affected zone (HAZ) of boron added modified 9Cr–1Mo (P91B) steel weld at 898 K. The crack growth rates in the HAZ of P91B weld have been compared with the crack growth rates in HAZ of without boron P91 steel weld. The creep crack growth rates are estimated as per ASTM E1457 using 7 mm thick compact tension specimens with a notch in the HAZ and test duration 248h-11,000 h. The CCG rate ( a ˙ ) vs. C* correlation, commonly expressed as a ˙ = D ( C ∗ ) ϕ , has been established. In comparison, the crack growth rate in the HAZ of P91 weld is found to be threefold as compared to HAZ of P91B weld; with the difference in CCG rate increasing towards a higher C* range. Creep damage assessment study has been done in the vicinity of creep crack in HAZ of a P91B weld specimen tested for 11,000 h. The extent of cavitation, cavities link-up, and micro-crack formation in HAZ of P91B weld is found to be relatively lower than HAZ of P91 weld. Most of the cavities appear to be discrete in nature. This testifies improvement in the creep crack growth resistance in the HAZ of P91B weld due to controlled boron addition of about 100 ppm to modified 9Cr–1Mo steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Advanced materials for structural components of Indian sodium cooled fast reactors10.1016/j.ijpvp.2016.02.027 ↗
2. Creep damage evaluation of 9Cr-1Mo-V-Nb steel welded joints showing Type IV fracture10.1016/j.ijpvp.2005.09.004 ↗
3. Failure mechanisms of high temperature components in power plants, ASME10.1115/1.482794 ↗
4. Microstructural investigations on Type IV cracking in a high Cr steel10.2355/isijinternational.42.1497 ↗
5. Characterization of microstructures across the heat-affected zone of the modified 9Cr-1Mo weld joint to understand its role in promoting Type IV cracking10.1007/s11661-006-9050-0 ↗
6. Evaluation of creep damage in heat affected zone of thick welded joint for mod. 9Cr-1Mo Steel10.1016/j.ijpvp.2009.04.008 ↗
7. Type IV failure in weldment of creep resistant ferritic alloys: I. Micromechanical origin of creep strain localization in the heat affected zone10.1016/j.jmps.2019.103774 ↗
8. Suppression of Type IV fracture and improvement of creep strength of 9Cr steel welded joints by boron addition10.1016/j.ijpvp.2006.09.013 ↗
9. Improvement of type IV cracking resistance of 9Cr heat resisting steel weldment by boron addition
10. Transition of crack from type IV to type II resulting from improved utilization of boron in the modified 9Cr-1Mo steel weldment10.1007/s11661-012-1179-4 ↗
11. A review of austenite memory effect in HAZ of B containing 9% Cr martensitic heat resistant steel10.3390/met9111233 ↗
12. Effect of boron on carbide coarsening at 873 K (600 °C) in 9 to 12% chromium steels10.1007/s11661-012-1205-6 ↗
13. Theoretical investigation of stabilizing mechanism by boron in body-centered cubic iron through (Fe,Cr)23(C,B)6 precipitates10.1007/s11661-016-3397-7 ↗
14. Difference of creep crack growth behaviour for base, heat-affected zone and welds of modified 9Cr–1Mo steel10.1179/096034011X13057032585557 ↗
15. Creep crack growth properties of P91 and P22 welded joints10.1111/ffe.12628 ↗
16. Applicability of C* parameter in assessing Type IV creep cracking in mod. 9Cr-1Mo Steel welded joint10.1016/j.engfracmech.2010.04.023 ↗
17. Study of creep crack growth in a modified 9Cr-1Mo steel weld metal and heat affected zone10.1016/j.msea.2015.12.053 ↗
18. Tensile cracks in creeping solids”
19. Influence of creep ductility and state of stress on creep crack growth
20. An engineering approach to the prediction of creep crack growth10.1115/1.3225859 ↗
21. 2017
22. Edition · 2007
23. Specimen geometry and size effects on the creep crack growth behaviour of p91 weldments
24. Experimental investigation of constraint effects on creep crack growth
25. Use of miniature specimens for creep crack-growth testing10.1115/1.482814 ↗
26. ASTM E1820-17a, Standard test method for measurement of fracture toughness.
27. Evaluation of the creep cavitation behavior in grade 91 steels10.1016/j.ijpvp.2016.02.018 ↗