journal article·2020-01

Effect of ultrasonic treatment on the structure of coarse-grained nickel

A.A. Samigullina, A.P. Zhilyaev, E.R. Shayakhmetova, A.A. Nazarov, A.A. Mukhametgalina

Publisher page

Abstract

Abstract Commercially pure coarse-grained nickel was studied. On the electrically polished surface of four samples an area 1 × 1 mm2 in size was marked by a special indenter and studied by EBSD analysis. All the samples were subjected to ultrasonic treatment (UST) with stress amplitudes of 20–80 MPa. The marked area was studied after that. In all the samples, X-ray diffraction analysis, TEM study, microhardness measurements and surface roughness analysis were carried out before and after the UST. It was shown that the UST results in an increase in dislocation density, an increase in the fraction of low-angle boundaries, an increase in microhardness and root-mean-square microstrain. The values of these parameters depend on the UST amplitude.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic Effects on Materials · Microstructure and mechanical properties · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Ultrasound-assisted crystallization (sonocrystallization)10.1016/j.ultsonch.2006.12.004 ↗
2. Ultrasound-induced martensitic transition in ferromagnetic Ni2.15Mn0.81Fe0.04Ga shape memory alloy10.1016/j.jmmm.2003.12.778 ↗
3. The influence of the initial structural state of armco iron on the ultrasonic treatment effect10.1007/s11182-009-9192-9 ↗
4. Ultrasonic impact peening for the surface properties' management10.1016/j.jsv.2007.03.054 ↗
5. Enhanced fatigue behavior of powder metallurgy Ti-6Al-4V alloy by applying ultrasonic impact treatment10.1016/j.msea.2015.06.072 ↗
6. Work-softening of metal crystals by alternating the rate of glide strain10.1016/0001-6160(61)90112-2 ↗
7. On possible mechanisms of the acoustoplastic effect10.1134/S1028335807050011 ↗
8. Acoustoplastic effect and the stress superimposition mechanism10.1134/1.1131170 ↗
9. Structure relaxation of nickel, processed by high pressure torsion, with the ultrasonic treatment10.22226/2410-3535-2012-3-134-138 ↗
10. Effect of ultrasonic treatment on the strength and ductility of bulk nanostructured nickel processed by equal-channel angular pressing
11. Effect of ultrasonic treatment on the structure and properties of ultrafine-grained nickel10.1134/S0031918X10120082 ↗
12. The increase of impact strength of ultrafine grained nickel after ultrasonic treatment10.22226/2410-3535-2014-1-52-54 ↗
13. Microstructure changes in ultrafine-grained nickel processed by high pressure torsion under ultrasonic treatment10.1016/j.ultras.2017.09.005 ↗
14. The increase of impact strength of ultrafine grained nickel after ultrasonic treatment10.22226/2410-3535-2014-1-52-54 ↗
15. Softening and hardening of ECAP nickel under ultrasonic treatment10.1016/j.msea.2017.05.054 ↗
16. Resonance interaction of an Edge_Dislocation wall with a traveling sound wave10.1134/S1063783410120085 ↗
17. Interaction of dislocation tripoles with a standing sound wave10.1134/S0031918X15100105 ↗
18. Drift of dislocation tripoles under ultrasound influence10.1016/j.ultras.2015.08.001 ↗
19. Ultrasonic stimulation of polygonization
20. Ultrasound influence on behavior of disordered dislocation systems in a crystal with non-equilibrium grain boundaries10.22226/2410-3535-2016-3-183-188 ↗
21. Relaxation of the residual defect structure in deformed polycrystals under ultrasonic action10.1134/S0031918X17070079 ↗
22. Resonant interaction of edge dislocations with running acoustic waves10.1088/0965-0393/18/2/025012 ↗
23. Cross-slip of a dislocation in an ultrasonic field and the influence of the amplitude and frequency of ultrasound, the orientation of the sample, and the dynamic viscosity coefficient on this process
24. Structure evolution in coarse-grained nickel under ultrasonic treatment10.1016/j.msea.2018.06.052 ↗
25. Prediction of the cyclic stress-strain curve of polycrystalline nickel10.1016/S1359-6454(01)00355-X ↗
26. Lutterotti
27. A profile refinement method for nuclear and magnetic structures10.1107/S0021889869006558 ↗
28. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-scherrer spectrum10.1080/14786435608238074 ↗
29. Micro-plasticity and recent insights from intermittent and small-scale plasticity10.1016/j.actamat.2017.06.023 ↗