Effect of process parameters on grain morphology and high-temperature mechanical properties of Inconel 718 manufactured by EB-PBF
Source abstract
Abstract
Electron beam powder bed fusion (EB-PBF) is one of the technologies used in the additive manufacturing (AM) process. In EB-PBF, scanning strategies can alter the material properties. It is also possible to control the microstructure by adjusting the scanning parameters. This study aims to observe the effect of the scanning parameters on the melt pool and microstructure of Inconel 718 processed by EB-PBF. Experimental work (microstructure observation, high temperature tensile and creep tests) and simulation work (using the COMSOL Multiphysics software) have been performed for this purpose. Increasing the current and scanning speed can decrease the temperature gradient and creep life and increase the tensile strength, while increasing pitch can increase the temperature gradient and creep life and decrease the tensile strength. The solution treatment and aging can change the δ phase and strengthening phase γʹ/γʺ. Previous research studies have demonstrated that the scanning parameters can alter grain morphologies. Inspired by those research studies, this study aims to shed light on how to combine different scanning parameters to acquire an expected microstructure or high-strength or enhanced creep resistance properties, which defines the novelty of this research. Additionally, specimens with two types of special crystal structures, columnar (CL) and equiaxed (EQ), were prepared and their high-temperature strength properties were investigated. The CL specimen showed a significantly longer creep life than the EQ specimen because no grain boundaries were perpendicular to the stress axis. • Low current, speed, beam power, and larger pitch yield columnar microstructure • High current, speed, beam power, and small pitch yield equiaxed microstructure • Columnar microstructure (CL) shows excellent creep properties than equiaxed (EQ) • CL makes a deeper melt pool, has higher grain width, and PDAS than EQ • In EQ: grain boundary δ phase before creep and precipitate-free zone after creep
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Effect of scanning strategy on thermal stresses and strains during electron beam melting of inconel 625: experiment and simulation10.3390/ma16010443 ↗
2. Thermomechanical simulations of residual stresses and distortion in electron beam melting with experimental validation for Ti-6Al-4V10.3390/met10091151 ↗
3. Additive manufacturing of alloy 718 via electron beam melting: effect of post-treatment on the microstructure and the mechanical properties10.3390/ma12010068 ↗
4. The role of yttrium micro-alloying on microstructure evolution and high-temperature mechanical properties of additively manufactured Inconel 71810.1016/j.matdes.2022.111567 ↗
5. Effects of yttrium content on solidification, microstructure, and mechanical properties of laser powder bed fused IN718 superalloy10.1016/j.jallcom.2023.173404 ↗
6. Localized melt-scan strategy for site specific control of grain size and primary dendrite arm spacing in electron beam additive manufacturing10.1016/j.actamat.2017.08.038 ↗
7. Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing10.1016/j.actamat.2016.03.063 ↗
8. Correlation of microstructure to creep response of hot isostatically pressed and aged electron beam melted inconel 71810.1007/s11661-018-4812-z ↗
9. Unidirectional columnar microstructure and its effect on the enhanced creep resistance of selective electron beam melted Inconel 71810.1016/j.jallcom.2019.153320 ↗
10. Influences of post-heat treatment on the microstructure evolution and creep properties of Ni-based superalloy IN718 fabricated by electron beam melting10.3390/met12030446 ↗
11. Three-dimensional phase field modeling of columnar to equiaxed transition in directional solidification of Inconel 718 alloy10.1016/j.jcrysgro.2020.125879 ↗
12. Scan strategies in EBM-printed IN718 and the physics of bulk 3D microstructure development10.1016/j.matchar.2022.112043 ↗
13. Influence of beam diameter on laser powder bed fusion (L-PBF) process
14. 8 - improvements in bonding metals (steel, aluminium)
15. Ni - in 718
16. Prediction of lack-of-fusion porosity for powder bed fusion
17. Numerical modeling of the thermal behavior and residual stress in the direct metal laser sintering process of titanium alloy products
18. Model of laser energy absorption adjusted to optical measurements with effective use in finite element simulation of selective laser melting10.1016/j.matdes.2018.07.029 ↗
19. Heat transfer and material flow during laser assisted multi-layer additive manufacturing10.1063/1.4896751 ↗
20. Differences in the response of additively manufactured titanium alloy to heat treatment - comparison between SLM and EBM
21. Predicting melt pool depth and grain length using multiple signatures from in-situ single camera two-wavelength imaging pyrometry for laser powder bed fusion10.1016/j.jmatprotec.2022.117724 ↗
22. An efficient track-scale model for laser powder bed fusion additive manufacturing: Part 1- thermal model
23. Single-track melt-pool measurements and microstructures in inconel 62510.1007/s11837-018-2771-x ↗
24. Keyhole mode induced simultaneous improvement in strength and ductility of Sc modified Al–Mn alloy manufactured by selective laser melting10.1016/j.msea.2021.141089 ↗
25. Elucidating the effect of preheating temperature on melt pool morphology variation in Inconel 718 laser powder bed fusion via simulation and experiment
26. Grain growth modeling for additive manufacturing of nickel based superalloys
27. Processing parameters in laser powder bed fusion metal additive manufacturing10.1016/j.matdes.2020.108762 ↗
28. A comprehensive comparison of the analytical and numerical prediction of the thermal history and solidification microstructure of inconel 718 products made by laser powder-bed fusion10.1016/J.ENG.2017.05.023 ↗
29. Kou · 2020
30. Enhancing the creep resistance of electron beam melted gamma Ti–48Al–2Cr–2Nb alloy by using two-step heat treatment10.1016/j.intermet.2020.106771 ↗
31. Advances in the solidification of IN718 and RS5 alloys
32. Primary spacing selection of constrained dendritic growth10.1016/0022-0248(93)90015-O ↗
33. Interdendritic spacing: Part II. A comparison of theory and experiment
34. Dendrite growth at the limit of stability: tip radius and spacing10.1016/0001-6160(81)90082-1 ↗
35. Microstructure and yield strength of SLM-fabricated CM247LC Ni-Superalloy10.1016/j.actamat.2017.02.007 ↗
36. Liquation cracking in laser powder bed fusion-fabricated Inconel718 of as-built, stress-relieved, and hot isostatic pressed conditions10.1016/j.msea.2023.145797 ↗
37. Prediction and characterization of variant electron diffraction patterns for γ″ and δ precipitates in an INCONEL 718 alloy10.1007/s11661-999-0239-x ↗
38. Unexpected δ-phase formation in additive-manufactured Ni-based superalloy10.1007/s11837-015-1772-2 ↗
39. Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing10.1016/j.scriptamat.2016.10.035 ↗
40. Unravelling the dominant influence of microsegregation on creep rupture behaviour of additively manufactured inconel 71810.1016/j.msea.2024.147480 ↗
41. Effect of yttrium addition on creep properties of a Ni-base superalloy built up by selective laser melting10.1016/j.scriptamat.2020.03.014 ↗