journal article·2025-05Open access

Ultra-high strength of nanocrystalline Inconel 718 composites by high-pressure torsion deformation and graphite reinforcements

Manoel Kasalo, Sebastian Suarez, Simon Fellner, Martin Stockinger, Stefan Wurster, Andrea Bachmaier

Abstract

A combination of colloidal mixing and high-pressure torsion (HPT) deformation was used to fabricate bulk graphite-reinforced Inconel 718 composites from powder materials. This study provides insight into the development of microstructure and mechanical properties of these composites in dependency on applied strain, deformation temperature, and graphite content. Scanning electron microscopy reveals significant grain and phase refinement down to the nanocrystalline regime of the graphite-reinforced Inconel 718 as well as the pure deformed Inconel 718 reference material. Furthermore, HPT deformation represents an effective method to fragment and dissolve the undesired Laves phase at room temperature and to obtain bulk nanocrystalline Inconel 718 in a single process step. Moreover, the graphite reinforcement phase was able to be finely dispersed within the matrix. Deformation temperature and reinforcement phase fraction appear to be the key factors in controlling the Laves phase fragmentation. Cross-sectional microhardness gradients were observed as a result of the process parameter-dependent microstructural evolution, leading to a maximum hardness of ∼7.5 GPa. The nanocrystalline composites show ultra-high tensile strength values above 2100 MPa, retaining ductile deformation until fracture and improved thermomechanical properties. The functional properties of graphite and the high strength of the processed Inconel 718 composites might extend the material's lifespan and potentially open new application areas. • Nanocrystalline Inconel 718 composites manufactured by HPT at room temperature. • Control of Laves phase fragmentation by strain, temperature, and graphite fraction. • Composites exhibit ultra-high strength, ductile fracture, and high hardness. • Anomalous hardening with rising temperatures due to fine Laves phase precipitates.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Surface Treatment and Residual Stress · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Rahim · 2015 · 3
2. Evolution of lattice spacing of gamma double prime precipitates during aging of polycrystalline Ni-base superalloys: an in situ investigation10.1007/s11661-019-05536-y ↗
3. Phase transformations in nickel base superalloy Inconel 718 during cyclic loading at high temperature10.30657/pea.2017.15.04 ↗
4. Laves phase control of Inconel 718 superalloy fabricated by laser direct energy deposition via δ aging and solution treatment10.1016/j.jmrt.2020.06.061 ↗
5. Impact of heat treatment and building direction on tensile properties and fracture mechanism of Inconel 718 produced by SLM process10.3390/met14040440 ↗
6. Effect of laser energy density on the microstructure and microhardness of Inconel 718 alloy fabricated by selective laser melting10.3390/cryst12091243 ↗
7. Generation of metallic nanocomposites by severe plastic deformation10.1179/1743280412Y.0000000003 ↗
8. Effect of carbon in severe plastically deformed metals10.1002/adem.202000879 ↗
9. Enhanced tribological properties of MWCNT/Ni bulk composites – influence of processing on friction and wear behaviour10.1016/j.carbon.2013.08.054 ↗
10. Mechanical response and wear behavior of graphene reinforced Inconel 718 composite produced via hybrid accumulative roll bonding and gas tungsten arc welding process10.1016/j.jmrt.2022.06.013 ↗
11. Effect of TiC particle size on processing, microstructure and mechanical properties of an Inconel 718/TiC composite material made by binder jetting additive manufacturing10.3390/met13071271 ↗
12. Optimizing tensile properties and hardness of Inconel 718 by cold rolling10.3390/met14040455 ↗
13. Mechanical properties of Aluminum-Copper(p) composite metallic materials10.1016/j.jart.2016.05.009 ↗
14. Progress in aluminum-based composites prepared by stir casting: mechanical and tribological properties for automotive, aerospace, and military applications10.3390/lubricants12120421 ↗
15. On the reinforcement homogenization in CNT/metal matrix composites during severe plastic deformation10.1016/j.matchar.2018.01.007 ↗
16. The limits of refinement by severe plastic deformation10.1002/adem.200600133 ↗
17. Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: an interdisciplinary review10.1016/j.jallcom.2024.174667 ↗
18. B02 Committee, Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service, ASTM International, West Conshohocken, PA.
19. Development of a new testing procedure for performing tensile tests on specimens with sub-millimetre dimensions10.1520/JTE20120175 ↗
20. Equivalent strains in severe plastic deformation10.1002/adem.200310085 ↗
21. Saturation of fragmentation during severe plastic deformation10.1146/annurev-matsci-070909-104445 ↗
22. Ducki · 2015 · 111
23. High-pressure torsion applied to nickel single crystals10.1080/14786430802337071 ↗
24. Processing of Nanocrystalline Inconel 718—Graphite Composites by High-Pressure Torsion
25. The effect of Laves phase on the mechanical properties of wrought and cast + HIP Inconel 718
26. First-principles study of structural and electronic properties of Laves phases structures YM 2 (M = Cu and Zn)10.1051/matecconf/20130504037 ↗
27. Performance testing and rapid solidification behavior of stainless steel powders prepared by gas atomization10.3390/ma14185188 ↗
28. The physical metallurgy of cast and wrought alloy 718
29. Tribology of self-lubricating metal matrix composites
30. Microstructure evolution and mechanical properties of (CoCrNi)90(AlTiZr)5(CuFeMo)5 multicomponent alloy: a pathway through multicomponent alloys toward new superalloys10.1016/j.jallcom.2020.158412 ↗
31. Enhancing mechanical properties in Ti-Containing FeMn40Co10Cr10C0.5 High-Entropy alloy through Chi (χ) phase dissolution and precipitation hardening10.1016/j.matlet.2024.137516 ↗
32. The metallurgy of alloy 625
33. Carbide precipitation in nickel base superalloys 718 and 625 and their effect on mechanical properties
34. Laves phases: a review of their functional and structural applications and an improved fundamental understanding of stability and properties10.1007/s10853-020-05509-2 ↗
35. Influence of processing parameters on the mechanical properties of HPT‐deformed nickel/carbon nanotube composites10.1002/adem.201800422 ↗
36. Influence of impurities and deformation temperature on the saturation microstructure and ductility of HPT-deformed nickel10.1016/j.actamat.2011.08.023 ↗
37. Ultrahigh-strength low carbon steel obtained from the martensitic state via high pressure torsion10.1016/j.actamat.2018.12.028 ↗
38. The role of carbon segregation on nanocrystallisation of pearlitic steels processed by severe plastic deformation10.1007/s10853-006-0750-z ↗
39. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
40. Effects of processing routes on room temperature tensile strength and elongation for Inconel 71810.1016/j.matdes.2017.01.069 ↗
41. Mechanical and tribological behaviors of graphene/Inconel 718 composites10.1016/S1003-6326(18)64841-1 ↗
42. The influence of particles size and its distribution on the degree of stress concentration in particulate reinforced metal matrix composites10.1016/j.msea.2018.06.067 ↗
43. Tensile and fracture toughness properties of SiCp reinforced Al alloys: effects of particle size, particle volume fraction, and matrix strength10.1361/10599490421358 ↗
44. Strengthening and weakening effects of particles on strength and ductility of SiC particle reinforced Al-Cu-Mg alloys matrix composites
45. The physical meaning of indentation and scratch hardness10.1088/0508-3443/7/5/301 ↗
46. Anisotropic fracture behavior of ultrafine-grained iron10.1016/j.msea.2009.12.033 ↗