journal article·2025-02

Activating metastability engineering via control of initial microstructure in C-added CoCrFeNiMo medium-entropy alloy: in situ X-ray diffraction study

Hyeonseok Kwon, Jae Heung Lee, Ji Yeong Lee, Gang Hee Gu, Sang Guk Jeong, Changwan Ha, Jaemin Wang, Byeong-Joo Lee, Emad Mawaad, Sangbong Yi, Hyoung Seop Kim

Publisher page

Abstract

Deformation-induced martensitic transformation (DIMT) from face-centered cubic to body-centered cubic or body-centered tetragonal martensite in metastable ferrous medium-entropy alloys (FeMEAs) can be effectively tuned by modifying initial microstructures to achieve the desired mechanical response. For example, partial recrystallization can promote a faster rate of DIMT by providing numerous nucleation sites for the martensite embryos, such as profuse shear bands and nanotwins. Precipitation-driven changes in matrix concentrations can also influence the phase stability and the DIMT kinetics. In this work, two Co18.5Cr12Fe55Ni9Mo3.5C2 (at%) FeMEA samples with different fractions of recrystallized regions and precipitate volume fractions were fabricated, and the difference in their DIMT behaviors and work hardening responses was investigated with in situ high energy X-ray diffraction analysis during tensile testing. The sample with a higher fraction of non-recrystallized regions and carbide precipitates showed low FCC phase stability mediated by the profuse nucleation sites in non-recrystallized regions and precipitation-driven metastability, and rapid DIMT to α′ martensite from the beginning of plastic deformation. Meanwhile, the other sample showed a delay in DIMT until the final stage of deformation. The lattice strain evolution demonstrated dynamic stress partitioning onto the newly born α′ martensite. Furthermore, the phase stress calculation showed that the stress partitioning creates a meaningful contribution to the enhancement of the work hardening and flow stress of the sample with the faster DIMT kinetics, validating our strategy to regulate DIMT via initial microstructure in search of improved mechanical performances.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. High-entropy alloys10.1038/s41578-019-0121-4 ↗
2. Recent progress in high entropy alloys10.3166/acsm.31.633-648 ↗
3. Strong and ductile non-equiatomic high-entropy alloys: design, processing, microstructure, and mechanical properties10.1007/s11837-017-2540-2 ↗
4. Effect of warm rolling on the structure and tensile properties of a metastable Fe-based medium entropy alloy10.1007/s12540-023-01532-5 ↗
5. Annealing-induced abnormally ultrahigh cryogenic strength-ductility synergy in a cold rolled ferrous medium entropy alloy10.1016/j.intermet.2023.107933 ↗
6. Fe55Co17.5Ni10Cr12.5Mo5 high-entropy alloy with outstanding cryogenic mechanical properties driven by deformation-induced phase transformation behavior10.1007/s12540-022-01215-7 ↗
7. A novel Fe-rich non-equiatomic medium-entropy alloy with superior mechanical properties10.1016/j.jallcom.2023.170029 ↗
8. Structure and properties of Ti-rich Ti–Zr–Nb–Mo medium-entropy alloys10.1016/j.jallcom.2021.159137 ↗
9. Novel metastable Nonequiatomic Ti-Zr-Nb-Mo medium-entropy alloys with high yield-strength-to-elastic-modulus ratios10.1007/s12540-021-01122-3 ↗
10. Nano-precipitates strengthened non-equiatomic medium-entropy alloy with outstanding tensile properties10.1016/j.msea.2020.139218 ↗
11. Exceptional phase-transformation strengthening of ferrous medium-entropy alloys at cryogenic temperatures10.1016/j.actamat.2018.09.057 ↗
12. Doubled strength and ductility via maraging effect and dynamic precipitate transformation in ultrastrong medium-entropy alloy10.1038/s41467-023-35863-z ↗
13. High-density nanoprecipitates and phase reversion via maraging enable ultrastrong yet strain-hardenable medium-entropy alloy10.1016/j.actamat.2023.118810 ↗
14. Ultrahigh cryogenic strength and ductility in a duplex metastable ferrous medium-entropy alloy10.1016/j.scriptamat.2023.115334 ↗
15. Phase‐transformation ductilization of brittle high‐entropy alloys via metastability engineering10.1002/adma.201701678 ↗
16. Metastability driven hierarchical microstructural engineering: overview of mechanical properties of metastable complex concentrated alloys10.1016/j.jallcom.2020.155625 ↗
17. Enhancement of hardness and yield strength induced by Cu-rich phase and its effect at cryogenic temperature on gas tungsten arc welds of ferrous medium-entropy alloy10.1007/s12540-022-01376-5 ↗
18. Microstructural evolution of a ductile metastable β titanium alloy with combined TRIP/TWIP effects10.1016/j.jallcom.2016.12.394 ↗
19. Regulation of cryogenic mechanical behaviors of C-added non-equiatomic CoCrFeNiMo ferrous medium-entropy alloy via control of initial microstructure10.1016/j.jmst.2024.05.003 ↗
20. Metastability engineering of partially recrystallized C-doped non-equiatomic CoCrFeNiMo medium-entropy alloy10.1063/5.0065000 ↗
21. Grain size dependent mechanical behavior and TRIP effect in a metastable austenitic stainless steel10.1016/j.ijplas.2022.103502 ↗
22. Microstructure characteristics, mechanical properties and strain hardening behavior of nitrogen-bearing Fe-0.2C-5Mn TRIP steel10.1007/s12540-022-01253-1 ↗
23. Martensite phase stress and the strengthening mechanism in TRIP steel by neutron diffraction10.1038/s41598-017-15252-5 ↗
24. On the use of Considere's criterion in tensile testing of materials which accumulate internal damage10.1016/S1359-6462(99)00159-1 ↗
25. Effect of niobium on the thermal stability and mechanical properties of a low-carbon ultrafine grain steel10.1007/s12540-022-01352-z ↗
26. The effects of carbon contents and Ms temperatures on the hardness of martensitic Fe-Ni-C Alloys10.2355/isijinternational1966.12.16 ↗
27. Thermo-Calc & DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
28. A thermodynamic description of the Co-Cr-Fe-Ni-V system for high-entropy alloy design10.1016/j.calphad.2019.05.001 ↗
29. A novel high-entropy alloy with multi-strengthening mechanisms: activation of TRIP effect in C-doped high-entropy alloy10.1016/j.msea.2022.144220 ↗
30. Lee · 1999
31. Enhanced cryogenic tensile properties with multi-stage strain hardening through partial recrystallization in a ferrous medium-entropy alloy10.1016/j.scriptamat.2020.113653 ↗
32. Stability of grain-refined reversed structures in a 301LN austenitic stainless steel under cyclic loading10.1016/j.msea.2017.07.033 ↗
33. Influence of original austenite grain size on tensile properties of a high-manganese transformation-induced plasticity (TRIP) steel10.1016/j.msea.2017.12.107 ↗
34. Characterization of the deformation and phase transformation behavior of VC-free and VC-containing FeMnSi-based shape memory alloys by in situ neutron diffraction10.1016/j.msea.2017.07.077 ↗
35. An in-situ neutron diffraction study of a multi-phase transformation and twinning-induced plasticity steel during cyclic loading10.1063/1.4919455 ↗
36. In situ neutron diffraction study of phase stress evolution in a ferrous medium-entropy alloy under low-temperature tensile loading10.1016/j.scriptamat.2019.02.027 ↗
37. Calculation of solidification-related thermophysical properties for steels10.1007/s11663-997-0095-2 ↗
38. X-ray studies of deformed metals10.1016/0502-8205(59)90015-2 ↗
39. Gradient cell–structured high-entropy alloy with exceptional strength and ductility10.1126/science.abj8114 ↗
40. Competitive strengthening between dislocation slip and twinning in cast-wrought and additively manufactured CrCoNi medium entropy alloys10.1016/j.actamat.2023.118699 ↗
41. Tensile behavior of a TRIP-aided ultra-fine grained steel studied by neutron diffraction10.2355/isijinternational.51.145 ↗
42. Work hardening behavior of hot-rolled metastable Fe50Co25Ni10Al5Ti5Mo5 medium-entropy alloy: in situ neutron diffraction analysis10.1080/14686996.2022.2122868 ↗
43. Evolution of microscopic strains, stresses, and dislocation density during in-situ tensile loading of additively manufactured AlSi10Mg alloy10.1016/j.ijplas.2021.102946 ↗