Identification of an affordable and printable metastable β Ti alloy with outstanding deformation behaviour for use in laser powder bed fusion
Source abstract
Abstract
Research on metastable β Ti alloys has recently shown the possibility to achieve outstanding ductility and work hardening behaviours by engineering the materials’ unique strain transformable attributes and responses to heat treatment. As quenching is central to the development of the metastable phase in these alloys, it is of interest to understand how these materials could be designed and developed for use in laser additive manufacturing where feedstocks experience numerous rapid thermal cycles. In this context, we first propose a material design framework to identify printable metastable Ti alloys for laser powder bed fusion (L-PBF). We focus on the ternary Ti-Cr-Sn system for both its affordable character and interest in the biomedical field. The design framework combines criteria based on well-established empirical parameters that we use to compare stability of β phase and resistance to cracking during L-PBF, i.e. its printability. The design work is supported by series of microstructural investigations on arc-melted buttons of selected compositions. Using such methodology we identify Ti-7.5Cr-4.5Sn as strain transformable alloy of good printability and we then characterise this alloy in depth in a series of laser powder bed fusion experiments. Printability of this alloy is further demonstrated via printing experiments using a variety of processing conditions while the deformation character is studied using compressive testing. It was found that the identified Ti-7.5Cr-4.5Sn alloy can achieve a high compressive strain exceeding 70% thanks to deformation mechanisms that combine dislocation slip and {3 3 2}<1 1 3> twinning. This research paves the way towards the identification of novel Ti alloys for L-PBF beyond those used in the aerospace sector, opening the way for a broader field of applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (87)
Show source-provided references
1. Review of mechanical properties of Ti-6Al-4V made by laser-based additive manufacturing using powder feedstock
2. Refinement of the grain structure of additive manufactured titanium alloys via epitaxial recrystallization enabled by rapid heat treatment10.1016/j.scriptamat.2020.01.027 ↗
3. Microstructure and tensile properties of additive manufactured Ti-6Al-4V with refined prior-β grain structure obtained by rapid heat treatment10.1016/j.msea.2021.141271 ↗
4. The microstructure and tensile properties of additively manufactured Ti–6Al–2Zr–1Mo–1V with a trimodal microstructure obtained by multiple annealing heat treatment10.1016/j.msea.2021.142241 ↗
5. Effect of subtransus heat treatment on the microstructure and mechanical properties of additively manufactured Ti-6Al-4V alloy10.1016/j.jallcom.2017.11.263 ↗
6. Achieving an ideal combination of strength and plasticity in additive manufactured Ti–6.5Al–2Zr–1Mo–1V alloy through the development of tri-modal microstructure10.1016/j.msea.2022.142944 ↗
7. Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties10.1016/j.jallcom.2012.07.022 ↗
8. Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition10.1016/j.actamat.2014.11.028 ↗
9. Inducing stable α + β microstructures during selective laser melting of Ti-6Al-4V using intensified intrinsic heat treatments10.3390/ma10030268 ↗
10. In situ tailoring microstructure in additively manufactured Ti-6Al-4V for superior mechanical performance10.1016/j.actamat.2016.12.027 ↗
11. Grain structure control during metal 3D printing by high-intensity ultrasound10.1038/s41467-019-13874-z ↗
12. Grain refining of Ti-6Al-4V alloy fabricated by laser and wire additive manufacturing assisted with ultrasonic vibration10.1016/j.ultsonch.2021.105472 ↗
13. The influence of iron in minimizing the microstructural anisotropy of Ti-6Al-4V produced by laser powder-bed fusion10.1007/s11661-020-05692-6 ↗
14. Microstructural engineering of a dual-phase Ti-Al-V-Fe alloy via in situ alloying during laser powder bed fusion
15. In situ formation of a metastable β-Ti alloy by laser powder bed fusion (L-PBF) of vanadium and iron modified Ti-6Al-4V10.3390/met8121067 ↗
16. An investigation into the comparative costs of additive manufacture vs. machine from solid for aero engine parts, Cost Effective Manufacture via Net-Shape Processing
17. Alloys-by-design: a low-modulus titanium alloy for additively manufactured biomedical implants10.1016/j.actamat.2022.117749 ↗
18. Development of a novel metastable beta titanium alloy with ultrahigh yield strength and good ductility based on laser power bed fusion
19. A semi-empirical approach to the prediction of deformation behaviors of β-Ti alloys10.1016/j.scriptamat.2018.08.035 ↗
20. From single phase to dual-phase TRIP-TWIP titanium alloys: design approach and properties10.1016/j.mtla.2020.100700 ↗
21. Microstructure and mechanical properties of the near-beta titanium alloy Ti-5553 processed by selective laser melting10.1016/j.matdes.2016.04.103 ↗
22. Evolution of microstructure and mechanical properties of selective laser melted Ti-5Al-5V-5Mo-3Cr after heat treatments10.1080/13621718.2019.1594589 ↗
23. Additive manufacturing of TTFNZ (Ti-4.5Ta-4Fe-7.5Nb-6Zr), a novel metastable β-titanium alloy for advanced engineering applications10.1016/j.jallcom.2022.165899 ↗
24. Ultrastrong nanotwinned titanium alloys through additive manufacturing10.1038/s41563-022-01359-2 ↗
25. A high strength and low modulus metastable β Ti-12Mo-6Zr-2Fe alloy fabricated by laser powder bed fusion in-situ alloying
26. Grain refinement effect of ZrB2 in laser additive manufactured metastable β-titanium alloy with enhanced mechanical properties10.1016/j.msea.2022.144104 ↗
27. Strength and ductility optimization of laser additive manufactured metastable β titanium alloy by tuning α phase by post heat treatment10.1016/j.msea.2021.142265 ↗
28. Deformation-free geometric recrystallisation in a metastable β-Ti alloy produced by selective laser melting10.1080/21663831.2020.1713244 ↗
29. Additive manufacturing of high strength near β titanium alloy Ti-55511 by engineering nanoscale secondary α laths via in-situ heat treatment10.1016/j.msea.2021.141245 ↗
30. Superelastic response of low-modulus porous beta-type Ti-35Nb-2Ta-3Zr alloy fabricated by laser powder bed fusion
31. Selective laser melting of high-strength, low-modulus Ti–35Nb–7Zr–5Ta alloy10.1016/j.mtla.2020.100941 ↗
32. A novel low-modulus titanium alloy for biomedical applications: a comparison between selective laser melting and metal injection moulding10.1016/j.msea.2021.141081 ↗
33. Perspectives on additive manufacturing enabled Beta-titanium alloys for biomedical applications10.18063/ijb.v8i1.478 ↗
34. Additive manufacturing of ultrafine-grained high-strength titanium alloys10.1038/s41586-019-1783-1 ↗
35. Hierarchical nano-martensite-engineered a low-cost ultra-strong and ductile titanium alloy10.1038/s41467-022-33710-1 ↗
36. Market
37. L.M. Exchange, London Metal Exchange. https://www.lme.com/en/. (Accessed 2024/March/21.
38. Development of low-cost titanium alloys: a chronicle of challenges and opportunities
39. Beta titanium alloys and their role in the titanium industry
40. Phase stability and stress-induced transformations in beta titanium alloys
41. Suppression and reactivation of transformation and twinning induced plasticity in laser powder bed fusion additively manufactured Ti-10V-2Fe-3Al
42. Significant enhancement in yield strength for a metastable beta titanium alloy by selective laser melting10.1016/j.msea.2021.141291 ↗
43. Thermomechanical processing of beta titanium alloys—an overview10.1016/S0921-5093(97)00783-1 ↗
44. Prediction of the martensite start temperature for β titanium alloys as a function of composition10.1016/j.scriptamat.2008.12.034 ↗
45. Design of next-generation alloys for additive manufacturing10.1002/mdp2.50 ↗
46. A review of the metastable omega phase in beta titanium alloys: the phase transformation mechanisms and its effect on mechanical properties10.1080/09506608.2022.2036401 ↗
47. Evans · 2017
48. Effect of Sn content on phase constitution and mechanical properties of Ti-Cr-Sn shape memory alloys
49. Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting10.1016/j.actamat.2014.01.018 ↗
50. Effect of Nb content on microstructure, property and in vitro apatite-forming capability of Ti-Nb alloys fabricated via selective laser melting10.1016/j.matdes.2017.04.026 ↗
51. Controlling the microstructure and mechanical properties of a metastable β titanium alloy by selective laser melting10.1016/j.msea.2018.04.087 ↗
52. Transformation-induced plasticity and high strength in beta titanium alloy manufactured by selective laser melting10.1016/j.mtla.2019.100299 ↗
53. Multi-scale microstructural development and mechanical properties of a selectively laser melted beta titanium alloy
54. Evolution of microstructural complex transitions in low-modulus β-type Ti-35Nb-2Ta-3Zr alloy manufactured by laser powder bed fusion
55. Surface residual stress and phase stability in unstable β-type Ti–15Mo–5Zr–3Al alloy manufactured by laser and electron beam powder bed fusion technologies
56. Mechanical properties of a newly additive manufactured implant material based on Ti-42Nb10.3390/ma11010124 ↗
57. Microstructure and mechanical properties of β-21S Ti alloy fabricated through laser powder bed fusion10.1007/s40964-021-00181-7 ↗
58. Achieving homogeneity in a high-Fe β-Ti alloy laser-printed from blended elemental powders10.1016/j.matdes.2021.110072 ↗
59. Using electron/atom ratio in titanium alloy design10.1007/BF00541408 ↗
60. Design and mechanical properties of new β type titanium alloys for implant materials10.1016/S0921-5093(97)00808-3 ↗
61. General approach to phase stability and elastic properties of β-type Ti-alloys using electronic parameters10.1016/j.scriptamat.2006.04.022 ↗
62. Theoretical design of titanium alloys
63. A β-titanium alloy with extra high strain-hardening rate: design and mechanical properties10.1016/j.scriptamat.2015.11.020 ↗
64. Fatigue behavior of arc melted Ti–13Nb–13Zr alloy10.1016/j.ijfatigue.2004.01.011 ↗
65. Dynamics of pore formation during laser powder bed fusion additive manufacturing10.1038/s41467-019-10009-2 ↗
66. Is the energy density a reliable parameter for materials synthesis by selective laser melting?
67. Metallography and microstructures of titanium and its alloys
68. Effects of Cr and Sn additives on the martensitic transformation and deformation behavior of Ti-Cr-Sn biomedical shape memory alloys10.1016/j.msea.2021.141668 ↗
69. Twinning system selection in a metastable β-titanium alloy by Schmid factor analysis10.1016/j.scriptamat.2011.02.033 ↗
70. Lütjering · 2007
71. Origin of {332} twinning in metastable β-Ti alloys10.1016/j.actamat.2013.10.048 ↗
72. Deformation mechanisms in a metastable beta titanium twinning induced plasticity alloy with high yield strength and high strain hardening rate10.1016/j.actamat.2018.04.035 ↗
73. Welsch · 1993
74. Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects10.1016/j.actamat.2013.07.019 ↗
75. Deformation induced hierarchical twinning coupled with omega transformation in a metastable β-Ti alloy10.1038/s41598-018-37865-0 ↗
76. High strength and ductility in low-cost Ti–Al–Fe–Mn alloy exhibiting transformation-induced plasticity10.1016/j.msea.2019.138813 ↗
77. Sn-Ti (Tin-Titanium)10.1007/s11669-010-9663-2 ↗
78. Comparative study of Ti-xCr-3Sn alloys for biomedical applications10.2320/matertrans.M2011153 ↗
79. Mechanism of twinning-induced plasticity in β-type Ti–15Mo alloy10.1016/j.scriptamat.2013.05.027 ↗
80. On the mechanism of {332} twinning in metastable β titanium alloys10.1016/j.actamat.2016.03.040 ↗
81. Modelling martensitic transformation in titanium alloys: the influence of temperature and deformation10.1016/j.mtla.2019.100382 ↗
82. Microstructural control of additively manufactured metallic materials10.1146/annurev-matsci-070115-031816 ↗
83. Element vaporization of Ti-6Al-4V alloy during selective laser melting10.3390/met10040435 ↗
84. Melt pool temperature and cooling rates in laser powder bed fusion
85. Yaws · 2015
86. Selective evaporation of metals from weld pools
87. Diffusion models for evaporation losses during electron-beam melting of alpha/beta-titanium alloys10.1007/s11663-004-0025-5 ↗