Prediction of the fatigue life in a textured AZ31 Mg alloy as a function of orientation using fatigue indicator parameters
Source abstract
Abstract
Computational homogenization was used to simulate the mechanical response of a textured AZ31Mg alloy subjected to fully-reversed cyclic deformation. The behavior of each grain in the polycrystal followed a phenomenological crystal plasticity model that considered different deformation mechanisms, namely pyramidal, basal, and prismatic slip, as well as twinning and detwinning. It also accounted for both kinematic and isotropic hardening effects. The crystal plasticity model's parameters were adjusted to replicate the cyclic stress-strain curves along three different orientations (rolling direction, normal direction and at 45° between the rolling and normal directions) at different cyclic strain semi-amplitudes. Three different fatigue indicator parameters were calculated from the simulations, based on the accumulated plastic shear strain in one stabilized fatigue cycle from basal slip and pyramidal slip, and from the shear strain accommodated by twinning/de-twinning during one fatigue cycle. The predictions of the fatigue life based on the fatigue indicator parameters were compared with the experimental results for the three orientations. It was found that the most accurate prediction was obtained by using the fatigue indicator parameter associated with twinning/de-twinning. Thus, it is concluded that fatigue cracks nucleated at twin boundaries control the fatigue life of textured Mg alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Fatigue of magnesium alloys
2. Strain controlled cyclic deformation behavior of an extruded magnesium alloy10.1016/j.msea.2008.05.016 ↗
3. Low cycle fatigue properties of an extruded AZ31 magnesium alloy10.1016/j.ijfatigue.2008.03.009 ↗
4. Suresh · 1998
5. Computational homogenization of polycrystals10.1016/bs.aams.2018.07.001 ↗
6. Modeling cyclic deformation of inconel 718 superalloy by means of crystal plasticity and computational homogenization10.1016/j.ijsolstr.2017.06.014 ↗
7. High- and low-cycle fatigue crack initiation using polycrystal plasticity10.1098/rspa.2003.1258 ↗
8. Microstructure-based fatigue modeling of cast A356-T6 alloy10.1016/S0013-7944(02)00021-8 ↗
9. Micromechanical methodology for fatigue in cardiovascular stents10.1016/j.ijfatigue.2012.04.022 ↗
10. Polycrystal orientation distribution effects on microslip in high cycle fatigue10.1016/S0142-1123(02)00057-9 ↗
11. Mesoscale modeling of microstructurally small fatigue cracks in metallic polycrystals10.1016/j.msea.2014.01.015 ↗
12. A mesoscale approach for growth of 3D microstructurally small fatigue cracks in polycrystals10.1177/1056789513513916 ↗
13. Microstructure-sensitive probabilistic modeling of HCF crack initiation and early crack growth in Ni-base superalloy IN100 notched components10.1016/j.ijfatigue.2011.09.014 ↗
14. Comparative assessment of dissipated energy and other fatigue criteria10.1016/j.ijfatigue.2007.01.007 ↗
15. Fatigue design of structures under thermomechanical loadings10.1046/j.1460-2695.2002.00613.x-i1 ↗
16. Microstructure-sensitive fatigue crack nucleation in a polycrystalline Ni superalloy10.1016/j.ijfatigue.2016.04.013 ↗
17. Shenoy · 2007 · 889
18. High temperature fatigue behavior of a near-alpha titanium alloy10.1016/j.ijfatigue.2022.106918 ↗
19. Low-cycle fatigue behavior and life prediction of TA15 titanium alloy by crystal plasticity-based modelling10.1016/j.jmrt.2023.01.063 ↗
20. A generalized physical-based failure indicator parameter used in crystal plasticity model to predict fatigue life under low cycle fatigue and creep-fatigue loadings10.1016/j.ijfatigue.2022.107290 ↗
21. Effect of tensile overload on fatigue crack behavior of 2205 duplex stainless steel: experiment and finite element simulation10.1016/j.ijfatigue.2019.105199 ↗
22. Effects of temperature and microstructure on low cycle fatigue behaviour of a PM Ni-based superalloy: EBSD assessment and crystal plasticity simulation10.1016/j.ijfatigue.2022.106818 ↗
23. Numerical simulations of cyclic behaviors in light alloys under isothermal and thermo-mechanical fatigue loadings10.1016/j.matdes.2013.11.007 ↗
24. Scripta Materialia Influence of grain size and grain boundary misorientation on the fatigue crack initiation mechanisms of textured AZ31 Mg alloy10.1016/j.scriptamat.2021.114304 ↗
25. An experimental study of anisotropic fatigue behavior of rolled AZ31B magnesium alloy10.1016/j.matdes.2019.108266 ↗
26. Effect of anisotropy on the low-cycle fatigue behavior of rolled AZ31 magnesium alloy10.1016/j.msea.2009.08.044 ↗
27. Influence of loading direction on the anisotropic fatigue properties of rolled magnesium alloy10.1016/j.ijfatigue.2016.01.026 ↗
28. Cyclic deformation and fatigue of extruded ZK60 magnesium alloy with aging effects10.1016/j.msea.2014.07.074 ↗
29. Cyclic deformation and fatigue of rolled AZ80 magnesium alloy along different material orientations10.1016/j.msea.2016.09.031 ↗
30. An experimental study of cyclic plastic deformation of extruded ZK60 magnesium alloy under uniaxial loading at room temperature10.1016/j.ijplas.2013.07.008 ↗
31. Tension-compression asymmetry and the underlying slip/twinning activity in extruded Mg-Y sheets10.1016/j.ijplas.2020.102878 ↗
32. Reduction in tension-compression asymmetry via grain refinement and texture design in Mg-3Al-1Zn sheets10.1016/j.msea.2014.04.112 ↗
33. Multi-scale mechanisms of twinning-detwinning in magnesium alloy AZ31B simulated by crystal plasticity modeling and validated via in situ synchrotron XRD and in situ SEM-EBSD10.1016/j.ijplas.2019.02.018 ↗
34. Quantification of cyclic twinning-detwinning behavior during low-cycle fatigue of pure magnesium using high energy X-ray diffraction10.1016/j.ijfatigue.2019.04.011 ↗
35. A crystal plasticity model for hexagonal close packed (HCP) crystals including twinning and de-twinning mechanisms10.1016/j.ijplas.2013.02.016 ↗
36. A crystal plasticity FFT based study of deformation twinning, anisotropy and micromechanics in HCP materials: application to AZ31 alloy10.1016/j.ijplas.2018.10.007 ↗
37. A polycrystal plasticity based thermo-mechanical-dynamic recrystallization coupled modeling method and its application to light weight alloys10.1016/j.ijplas.2019.01.001 ↗
38. Predicting textural variability effects in the anisotropic plasticity and stability of hexagonal metals: application to magnesium and its alloys10.1016/j.ijplas.2020.102762 ↗
39. Modeling texture, twinning and hardening evolution during deformation of hexagonal materials10.1016/j.actamat.2006.11.017 ↗
40. Modeling the effect of twinning and detwinning during strain-path changes of magnesium alloy AZ3110.1016/j.ijplas.2008.05.005 ↗
41. Cyclic behavior of extruded magnesium: experimental, microstructural and numerical approach10.1016/j.ijplas.2011.06.002 ↗
42. Modeling twinning and detwinning behavior of Mg alloy ZK60A during monotonic and cyclic loading10.1016/j.ijplas.2014.08.010 ↗
43. Crystal plasticity modeling of low-cycle fatigue behavior of an Mg-3Al-1Zn alloy based on a model, including twinning and detwinning mechanisms10.1016/j.jmps.2022.105030 ↗
44. Deformation twinning and detwinning in extruded Mg-4Al: in-situ experiment and crystal plasticity simulation10.1016/j.ijplas.2022.103345 ↗
45. Multiscale modeling of twinning and detwinning behavior of HCP polycrystals10.1016/j.ijplas.2019.102653 ↗
46. Experimental and numerical analysis of cyclic deformation and fatigue behavior of a Mg-RE alloy10.1016/j.ijplas.2020.102885 ↗
47. A study of fatigue damage development in extruded Mg–Gd–Y magnesium alloy10.1016/j.msea.2013.09.089 ↗
48. Numerical investigation of the influence of twinning/detwinning on fatigue crack initiation in AZ31 magnesium alloy10.1016/j.msea.2019.03.030 ↗
49. Quantitative assessment of the microstructural factors controlling the fatigue crack initiation mechanisms in AZ31 Mg alloy10.1016/j.actamat.2022.118263 ↗
50. Crystallographic texture evolution in bulk deformation processing of FCC metals10.1016/0022-5096(92)80003-9 ↗
51. Constitutive analysis of elastic-plastic crystals at arbitrary strain10.1016/0022-5096(72)90017-8 ↗
52. Inelastic constitutive relations for solids: an internal-variable theory and its application to metal plasticity10.1016/0022-5096(71)90010-X ↗
53. An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: application to AZ31 Mg alloy10.1016/j.ijplas.2014.02.001 ↗
54. Incorporation of deformation twinning in models
55. Kinematic hardening rules with critical state of dynamic recovery, part I: formulation and basic features for ratchetting behavior10.1016/0749-6419(93)90042-O ↗
56. Romain Quey, Neper, (n.d.). https://neper.info/.
57. Gmsh: a 3-D finite element mesh generator with built-in pre- and post-processing facilities10.1002/nme.2579 ↗
58. Phenomenological crystal plasticity modeling and detailed micromechanical investigations of pure magnesium10.1016/j.jmps.2012.01.005 ↗
59. Continuum modeling of the response of a Mg alloy AZ31 rolled sheet during uniaxial deformation10.1016/j.ijplas.2011.05.002 ↗
60. Effect of rare earth additions on the critical resolved shear stresses of magnesium alloys10.1016/j.matlet.2014.04.144 ↗
61. Detwinning-related Bauschinger effect of an extruded magnesium alloy AZ31B10.1016/j.matchar.2018.12.005 ↗
62. In situ investigation of extension twinning-detwinning and its effect on the mechanical behavior of AZ31B magnesium alloy10.1016/j.matdes.2017.06.023 ↗
63. Internal stress relaxation and load redistribution during the twinning – detwinning-dominated cyclic deformation of a wrought magnesium alloy
64. Microstructure and mesh sensitivities of mesoscale surrogate driving force measures for transgranular fatigue cracks in polycrystals10.1016/j.msea.2015.05.048 ↗
65. Microstructure-based fatigue life model of metallic alloys with bilinear Coffin-Manson behavior10.1016/j.ijfatigue.2017.10.014 ↗
66. In-situ synchrotron X-ray tomography investigation of damage mechanism of an extruded magnesium alloy in uniaxial low-cycle fatigue with ratchetting10.1016/j.actamat.2021.116881 ↗
67. Relationship between fatigue crack initiation and activated {1 0 1 2} twins in as-extruded pure magnesium10.1016/j.scriptamat.2013.08.006 ↗
68. Fatigue damage development in pure polycrystalline magnesium under cyclic tension-compression loading10.1016/j.msea.2011.06.064 ↗