journal article·2022-01

Fracture behavior and deformation-induced structure changes of a Ti-based metallic glass using micro-sized cantilevers

Qiaoling Chu, Qilu Cao, Xiaofei Zhu, Min Zhang, Zhengwang Zhu, Haifeng Zhang, Ruixiang Bai, Zhenkun Lei, Peng Cheng, Cheng Yan

Publisher page

Abstract

Micro-cantilever bending tests are performed to quantify the fracture toughness and reveal the deformation mechanism of a Ti-based metallic glass. Plastic deformation is localized in shear bands initiating from the roots of the notches of the cantilevers. Although the load-displacement curves show considerable ductile failure characteristics, the notch fracture toughness values that obtained from the bending tests are extremely low (∼4.7 MPa m). Size dependent fracture is thought to be observed, where the fracture toughness increases with decreasing the uncracked ligament size of the cantilevers. TEM bright field images show that the shear bands with the width of 4–7 nm present brighter contrast. The regions in vicinity of the shear bands show dark zones (ranging from 3 to 5 nm in size) surrounded by continues bright zones. Cu nanocrystals are found not only inside the shear bands, but also around them. The free volume theory together with the simulation results is applied to explain the formation of shear bands in this Ti-based metallic glass during the bending deformation. The observed Cu nanocrystals are thought to be formed as a consequence of plastic-deformation-assisted crystallization. It is suggested that local atomic rearrangements lead to shifting of Cu nanocrystals towards more stable positions and cause the formation of Cu nanocrystals in regions subjected to high shear stress field.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Test sample geometry for fracture toughness measurements of bulk metallic glasses10.1016/j.actamat.2017.12.026 ↗
2. Size-dependent failure of the strongest bulk metallic glass10.1016/j.actamat.2019.08.019 ↗
3. Fracture toughness, fracture morphology, and crack-tip plastic zone of a Zr-based bulk amorphous alloy10.1007/s11661-001-1032-7 ↗
4. Compressive plasticity and toughness of a Ti-based bulk metallic glass10.1016/j.actamat.2009.11.013 ↗
5. Recent development and application products of bulk glassy alloys10.1016/j.actamat.2010.11.027 ↗
6. Model III fracture toughness of the Zr61Ti2Cu25Al12 bulk metallic glass10.1016/j.actamat.2016.02.063 ↗
7. Fracture and fatigue behavior of a Zr-Ti-Nb ductile phase reinforced bulk metallic glass matrix composite10.1016/j.scriptamat.2003.08.020 ↗
8. Effects of free volume changes and residual stresses on the fatigue and fracture behavior of a Zr-Ti-Ni-Cu-Be bulk metallic glass10.1016/j.actamat.2007.10.007 ↗
9. Fracture toughness study of new Zr-based Be-bearing bulk metallic glasses10.1016/j.scriptamat.2008.09.001 ↗
10. Mechanical behavior of amorphous alloys10.1016/j.actamat.2007.01.052 ↗
11. Correlations between elastic moduli and properties in bulk metallic glasses
12. Locating malleable bulk metallic glasses in Zr-Ti-Cu-Al alloys with calorimetric glass transition temperature as an indicator10.1016/S1005-0302(12)60180-7 ↗
13. Effect of sample size on deformation in amorphous metals10.1063/1.2884584 ↗
14. Sample size matters for Al88Fe7Gd5 metallic glass: smaller is stronger10.1016/j.actamat.2012.06.019 ↗
15. Deformation-induced nanocrystal formation in shear bands of amorphous alloys10.1038/367541a0 ↗
16. Deformation-induced nanocrystallization in an Al-based amorphous alloy at a subambient temperature10.1016/S1359-6462(02)00568-7 ↗
17. The effect of compression and tension on shear-band structure and nanocrystallization in amorphous Al90Fe5Gd5: a high-resolution transmission electron microscopy study10.1016/S1359-6454(03)00229-5 ↗
18. Nanoscale multistep shear band formation by deformation-induced nanocrystallization in Zr-Al-Ni-Pd bulk metallic glass10.1063/1.2081124 ↗
19. Characterization of deformation-induced structural change of Pd78Cu6Si16 metallic glass using a micro-sized cantilever-beam specimen10.1016/j.scriptamat.2009.11.029 ↗
20. An electron microscopy appraisal of tensile fracture in metallic glasses10.1016/j.actamat.2007.12.029 ↗
21. Temperature rise at shear bands in metallic glasses10.1038/nmat1536 ↗
22. Shear band melting and serrated flow in metallic glasses10.1063/1.2956666 ↗
23. Nanocrystallization during nanoindentation of a bulk amorphous metal alloy at room temperature10.1126/science.1067453 ↗
24. New regime of homogeneous flow in the deformation map of metallic glasses: elevated temperature nanoindentation experiments and mechanism modeling10.1016/j.actamat.2004.09.005 ↗
25. Studies of shear band velocity using spatially and temporally resolved measurements of strain during quasistatic compression of a bulk metallic glass10.1016/j.actamat.2009.06.013 ↗
26. Designing metallic glass matrix composites with high toughness and tensile ductility10.1038/nature06598 ↗
27. Microstructure controlled shear band pattern formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions10.1103/PhysRevLett.84.2901 ↗
28. Effects of size on the mechanical response of metallic glasses investigated through in situ TEM bending and compression experiments10.1016/j.actamat.2009.08.070 ↗
29. TiZr-based bulk metallic glass with over 50 mm in diameter10.1016/S1005-0302(10)60077-1 ↗
30. Mechanical deflection of cantilever microbeams: a new technique for testing the mechanical properties of thin films10.1557/JMR.1988.0931 ↗
31. Healing performance of Ti2AlC ceramic studied with in situ microcantilever bending10.1016/j.jeurceramsoc.2012.09.012 ↗
32. Hellan · 1984
33. Shear bands and cracking of metallic glass plates in bending10.1063/1.1582555 ↗
34. Ductile bulk metallic glass10.1103/PhysRevLett.93.255506 ↗
35. Nanocrystalline materials: controlling plastic instability10.1038/nmat797 ↗
36. Intrinsic toughness of the bulk-metallic glass Vitreloy 105 measured using micro-cantilever beams10.1016/j.actamat.2019.11.021 ↗
37. Embrittlement of a bulk metallic glass due to low-temperature annealing10.1016/S1359-6462(02)00102-1 ↗
38. New Ti-based bulk metallic glasses with exceptional glass forming ability10.1016/j.jnoncrysol.2018.06.038 ↗
39. A development of Ti-based bulk metallic glass10.1016/j.msea.2003.10.115 ↗
40. Super plastic bulk metallic glasses at room temperature10.1126/science.1136726 ↗
41. Transformation-mediated ductility in CuZr-based bulk metallic glasses10.1038/nmat2767 ↗
42. Effect of annealing close to Tg on notch fracture toughness of Pd-based thin-film metallic glass for MEMS applications10.1016/j.scriptamat.2005.10.072 ↗
43. Fracture mechanics of micro sample: fundamental considerations10.1016/j.matdes.2018.09.004 ↗
44. On the understanding of the effects of sample size on the variability in fracture toughness of bulk metallic glasses10.1016/j.actamat.2016.12.054 ↗
45. 2017
46. Shear band spacing under bending of Zr-based metallic glass plates10.1016/j.actamat.2004.01.034 ↗
47. Size-dependent fracture toughness of bulk metallic glasses10.1016/j.actamat.2014.01.062 ↗
48. A microscopic mechanism for steady state inhomogeneous flow in metallic glasses10.1016/0001-6160(77)90232-2 ↗
49. Mechanical behavior of shear bands and the effect of their relaxation in a rolled amorphous Al-based alloy10.1016/j.actamat.2005.04.003 ↗
50. The shear band controlled deformation in metallic glass: a perspective from fracture10.1038/srep21852 ↗
51. Characterization of free volume in a bulk metallic glass using positron annihilation spectroscopy10.1557/JMR.2002.0171 ↗
52. Softening caused by profuse shear banding in a bulk metallic glass10.1103/PhysRevLett.96.105503 ↗
53. Structural evolution of Cu-Zr metallic glasses under tension10.1016/j.actamat.2009.05.011 ↗
54. Mechanically-assisted nanocrystallization and defects in amorphous alloys: a high-resolution transmission electron microscopy study10.1016/j.scriptamat.2005.09.052 ↗