Development of microscale bicrystal tensile testing for strength measurement of oxidized grain boundaries of alloy 600 exposed to PWR environments
Source abstract
Abstract
Abstract Ni-based alloy 600 has been used as steam generator tubes in many pressurized water reactors (PWR). In these materials, oxidized grain boundaries are found, which may lead to (initiate) stress corrosion cracking in service. This work evaluates the cracking of oxidized grain boundaries on alloy 600. Novel testing procedure was developed, delivering not just yield strength, ultimate tensile strength and elongation data, but also direct observation of the failure. The information obtained will help to understand the stress corrosion cracking susceptibility of this alloy. It was found that the orientations of the two grains adjacent to a grain boundary play an important role in determining its propensity to crack; it also determines whether blocked volume ratio is an important consideration. Furthermore, it is found that the grain boundary shear stress needs to be considered in addition to the grain boundary normal stress.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. van Rooyen · 1975 · 31
2. Stress corrosion cracking of stainless steels and nickel alloys in high-temperature water10.5006/1.3278457 ↗
3. The intergranular oxidation susceptibility of thermally–treated Alloy 60010.1016/j.corsci.2016.11.004 ↗
4. General corrosion and stress corrosion cracking of Alloy 600 in light water reactor primary coolants10.1016/j.jnucmat.2019.04.023 ↗
5. Stress corrosion crack initiation of alloy 600 in PWR primary water10.1016/j.corsci.2017.04.013 ↗
6. Microstructural and microchemical mechanisms controlling intergranular stress corrosion cracking in light-water-reactor systems10.1016/0022-3115(94)90020-5 ↗
7. High-resolution characterization of intergranular attack and stress corrosion cracking of alloy 600 in high-temperature primary water10.5006/1.3280561 ↗
8. Advanced TEM characterization of stress corrosion cracking of Alloy 600 in pressurized water reactor primary water environment10.1016/j.jnucmat.2009.06.014 ↗
9. Stress corrosion cracking of alloy 600 and alloy 690 in hydrogen/steam at 380 °C10.1016/S0010-938X(97)86103-3 ↗
10. The IGSCC, sensitization, and microstructure study of Alloys 600 and 69010.1016/0029-5493(93)90040-G ↗
11. The effects of heat treatment on the chromium depletion, precipitate evolution, and corrosion resistance of INCONEL alloy 69010.1007/BF02650292 ↗
12. Internal oxidation of Alloy 600 exposed to hydrogenated steam and the beneficial effects of thermal treatment10.1016/j.corsci.2014.04.041 ↗
13. Effect of cold work and processing orientation on stress corrosion cracking behavior of alloy 60010.5006/1.3287659 ↗
14. Effect of temperature and cold work on the crack growth rate of alloy 600 in primary water10.5006/1.3293632 ↗
15. Effect of microstructure on stress corrosion cracking of alloy 600 in high purity water10.5006/0010-9312-33.1.26 ↗
16. Microstructural aspects of the thermal treatment of Inconel alloy 60010.1016/0026-0800(80)90020-8 ↗
17. Effects of carbides on susceptibility of alloy 600 to stress corrosion cracking in high-temperature water10.5006/1.3316012 ↗
18. Microstructure and microdeformation effects on IGSCC of alloy 600 steam generator tubing10.5006/1.3584948 ↗
19. Role of carbides in stress corrosion cracking resistance of alloy 600 and controlled-purity Ni-16% Cr-9% Fe in primary water at 360°C10.5006/1.3284887 ↗
20. Development of understanding of the interaction between localized deformation and SCC of austenitic stainless steels exposed to primary environment
21. Couvant · 2015 · 20
22. Calibration of the local IGSCC engineering model for alloy 600
23. In situ nanocompression testing of irradiated copper10.1038/nmat3055 ↗
24. Small-scale mechanical testing on nuclear materials: bridging the experimental length-scale gap10.1016/j.scriptamat.2017.04.026 ↗
25. Plastic flow and failure resistance of metallic glass: insight from in situ compression of nanopillars10.1103/PhysRevB.77.155419 ↗
26. Plasticity of micrometer-scale single crystals in compression10.1146/annurev-matsci-082908-145422 ↗
27. Plasticity in small-sized metallic systems: intrinsic versus extrinsic size effect10.1016/j.pmatsci.2011.01.005 ↗
28. Micropillar compression of ceramics at elevated temperatures10.1016/j.scriptamat.2009.01.029 ↗
29. Exploring specimen size effects in plastic deformation of Ni3(Al, Ta)
30. A novel fiber-fretting test for tribological characterization of the fiber/matrix interface10.1016/j.compositesb.2020.108535 ↗
31. Strain bursts in plastically deforming molybdenum micro- and nanopillars10.1080/14786430802132522 ↗
32. Micro-compression testing: a critical discussion of experimental constraints10.1016/j.msea.2009.01.005 ↗
33. Effects of pre-strain on the compressive stress–strain response of Mo-alloy single-crystal micropillars10.1016/j.actamat.2008.05.030 ↗
34. Micro- and nanoscale tensile testing of materials10.1007/s11837-009-0037-3 ↗
35. Applying a new push-to-pull micro-tensile testing technique to evaluate the mechanical properties of high dose Inconel X-75010.1016/j.msea.2019.01.113 ↗
36. In situ micro tensile testing of He+2 ion irradiated and implanted single crystal nickel film10.1016/j.actamat.2015.08.028 ↗
37. In situ micro-tensile testing on proton beam-irradiated stainless steel10.1016/j.jnucmat.2017.06.026 ↗
38. In situ micro-cantilever tests to study fracture properties of NiAl single crystals10.1016/j.actamat.2011.10.060 ↗
39. Size effect in bi-crystalline micropillars with a penetrable high angle grain boundary10.1016/j.actamat.2017.03.003 ↗
40. Interface fracture properties of thin films studied by using the micro-cantilever deflection technique10.1016/j.surfcoat.2009.09.013 ↗
41. Ceramic composites: a review of toughening mechanisms and demonstration of micropillar compression for interface property extraction10.1557/jmr.2017.473 ↗
42. Intergranular oxidation of Ni-based Alloy 600 in a simulated PWR primary water environment10.1016/j.corsci.2016.02.040 ↗
43. Review on slip transmission criteria in experiments and crystal plasticity models10.1007/s10853-015-9553-4 ↗
44. Dislocation interactions with grain boundaries10.1016/j.cossms.2014.05.004 ↗
45. Dislocation pile-up and grain boundary interactions in 304 stainless steel10.1016/0036-9748(86)90467-9 ↗
46. Effect of slip transmission at grain boundaries in Al bicrystals10.1016/j.ijplas.2019.09.006 ↗
47. Differences in deformation behavior of bicrystalline Cu micropillars containing a twin boundary or a large-angle grain boundary10.1016/j.actamat.2014.04.022 ↗
48. Insights on slip transmission at grain boundaries from atomistic simulations10.1016/j.cossms.2014.04.001 ↗
49. Quantitative linkage between the stress at dislocation channel – grain boundary interaction sites and irradiation assisted stress corrosion crack initiation10.1016/j.actamat.2019.02.032 ↗
50. Plastic strain localization in metals: origins and consequences10.1016/j.pmatsci.2013.06.001 ↗
51. Experimental methodology and theoretical framework in describing constrained plastic flow of FCC microscale tensile specimens10.1016/j.msea.2020.140124 ↗
52. The design of accurate micro-compression experiments10.1016/j.scriptamat.2005.06.043 ↗
53. A self-aligning microtensile setup: application to single-crystal GaAs microscale tension–compression asymmetry10.1557/jmr.2019.183 ↗