journal article·2020-01

An investigation on the deformation mechanisms of high carbon steel under the influence of thermal and rate-dependent loading

Amborish Banerjee, B. Gangadhara Prusty, Saroj Bhattacharyya, Qiang Zhu

Publisher page

Abstract

Abstract In this paper, the effect of strain rates on the material and substructural behaviour of high carbon (1% C) steel (HCS) is experimentally investigated at ambient and elevated temperatures. Compression tests at different strain rates (2.56 × 10-4 - 2.56 × 10-1/s) as well as temperatures (25-175 °C) were performed and the corresponding structure-property correlations were established. The material exhibited transformation of austenite to martensite at ambient condition whereas formations of ferrite/tempered martensite (TM) and carbide precipitates were evidenced at higher temperatures. At the high-temperature regime, with increasing the temperature from 100 to 175 °C, a noticeable increase in yield strength is evidenced. Such an increase in yield strength is due to the increase in the volume fraction of carbides precipitation and dislocation strengthening associated with the phase transformation. An overall increase in the kernel average misorientation (KAM) values were found with an increase in the strain-rate whereas, in terms of increasing temperature, the lowest KAM values were exhibited when the material was deformed at 100 °C. Transmission electron microscopy (TEM) studies revealed decreasing dislocation cell size with increase in the temperature and strain rate that further indicates an increase in the dislocation density of the material. The width of the plate martensite displayed a declining trend with a rise in the strain rate irrespective of the deformation temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Investigating the effect of applied strain rate in a single breakage event10.1016/j.mineng.2016.09.010 ↗
2. Hybrid structure of white layer in high carbon steel – formation mechanism and its properties10.1038/s41598-017-13749-7 ↗
3. Electron-microscopy investigation on nanocrystal formation in pure Fe and carbon steel during ball milling10.1016/S0921-5093(03)00631-2 ↗
4. Banerjee · 2017 · 55
5. Surface modification of high carbon steel through microstructural engineering10.1016/j.matchar.2018.12.020 ↗
6. Strain-rate-dependent deformation behaviour of high-carbon steel in compression: mechanical and structural characterisation10.1007/s10853-018-03301-x ↗
7. Decomposition characteristic of austenite retained in GCr15 bearing steel modified by addition of 1.3wt.% silicon during tempering10.1016/j.jmrt.2017.08.012 ↗
8. Nano/ultrafine grained austenitic stainless steel through the formation and reversion of deformation-induced martensite: mechanisms, microstructures, mechanical properties, and TRIP effect10.1016/j.matchar.2015.03.031 ↗
9. Characteristics of martensite transformed from deformed austenite with various states of ultrahigh strength 300 M steel10.1016/j.matchar.2018.07.037 ↗
10. Strain-rate-dependent deformation behavior of high-carbon steel under tensile–compressive loading10.1007/s11837-019-03594-6 ↗
11. Effects of martensitic transformability and dynamic strain age hardenability on plasticity in metastable austenitic steels containing carbon10.1007/s10853-017-1052-3 ↗
12. The influence of temperatures and strain rates on the mechanical behavior of dual phase steel in different conditions10.1016/j.jmrt.2014.11.001 ↗
13. Microstructure of warm rolling and pearlitic transformation of ultrafine-grained GCr15 steel10.1016/j.matchar.2014.07.011 ↗
14. Design method for TRIP-aided multiphase steel based on a microstructure-based modelling for transformation-induced plasticity and mechanically induced martensitic transformation10.1016/j.msea.2008.09.026 ↗
15. A model for deformation behavior and mechanically induced martensitic transformation of metastable austenitic steel10.1016/j.actamat.2004.07.031 ↗
16. Third generation of AHSS: microstructure design concepts
17. Experimental investigation on martensitic transformation and fracture morphologies of austenitic stainless steel10.1016/j.ijplas.2009.03.003 ↗
18. Temperature and strain rate dependent deformation induced martensitic transformation and flow behavior of quenching and partitioning steels10.1016/j.msea.2016.10.083 ↗
19. Austenite deformation behavior and the effect of ausforming process on martensite starting temperature and ausformed martensite microstructure in medium-carbon Si–Al-rich alloy steel10.1016/j.msea.2013.11.097 ↗
20. Energy efficient comminution under high velocity impact fragmentation10.1016/j.mineng.2011.05.006 ↗
21. Ball temperatures during mechanical alloying in planetary mills10.1016/S0925-8388(02)00512-1 ↗
22. Temperature of the milling balls in shaker and planetary mills10.1007/s10853-006-0312-4 ↗
23. Rate-dependent mechanical strength and flow behaviour of dual-phase high carbon steel at elevated temperatures: an experimental investigation10.1016/j.msea.2018.12.002 ↗
24. Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature.
25. Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates.
26. International · 2017
27. Low-temperature strain-induced ferrite transformation in twinning-induced plasticity steel10.1016/j.scriptamat.2012.09.006 ↗
28. D.A. Porter, K.E. Easterling, Phase Transformations in Metals and Alloys, third ed. (Revised Reprint), Taylor & Francis1992.10.1007/978-1-4899-3051-4 ↗
29. Aging and tempering behavior of iron-nickel-carbon and iron-carbon martensite10.1007/s11661-997-0042-5 ↗
30. Effect of cooling rate and chemical composition on microstructure and properties of naturally cooled vanadium-microalloyed steels10.1007/s11661-017-3964-6 ↗
31. Investigations of the microstructure evolution and tensile deformation behavior of austenitic Fe-Mn-Al-C lightweight steels and the effect of Mo addition10.1016/j.actamat.2018.01.051 ↗
32. Effect of composition and isothermal holding temperature on the precipitation hardening in Vanadium-microalloyed steels10.1016/j.matchar.2017.08.003 ↗
33. Strengthening mechanisms of different oxide particles in 9Cr ODS steel at high temperatures10.1016/j.msea.2018.06.109 ↗
34. Influence of the prior athermal martensite on the mechanical response of advanced bainitic steel10.1016/j.msea.2018.08.047 ↗
35. Superior strength of carbon steel with an ultrafine-grained microstructure and its enhanced thermal stability10.1007/s10853-015-9227-2 ↗
36. The mechanism of plastic deformation of crystals. Part I.—theoretical, proceedings of the royal society of london. Series A
37. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
38. Strengthening mechanisms and their relative contributions to the yield strength of microalloyed steels10.1007/s11661-012-1135-3 ↗
39. Dislocation cell formation in metals10.1063/1.1659399 ↗
40. Effects of strain rate on dynamic mechanical behavior and microstructure evolution of 5A02-O aluminum alloy10.1016/j.msea.2014.03.081 ↗
41. Twin structure of the lath martensite in low carbon steel10.1016/j.pnsc.2016.03.004 ↗
42. Lath formation mechanisms and twinning as lath martensite substructures in an ultra low-carbon iron alloy10.1038/s41598-018-32679-6 ↗
43. Deformation-induced phase transitions in a high-carbon steel10.1016/S0921-5093(02)00549-X ↗
44. Self-accommodated and pre-strained martensitic microstructure in single-crystalline, metamagnetic Ni–Mn–Sn Heusler alloy10.1007/s10853-017-0793-3 ↗
45. Fatigue and fracture behaviour of austenitic-martensitic high carbon steel under high cycle fatigue: An experimental investigation10.1016/j.msea.2019.02.010 ↗
46. Experimental investigation on the dynamic flow behaviour and structure-property correlation of dual-phase high carbon steel at elevated temperatures10.1016/j.msea.2018.12.002 ↗