journal article·2018-05Open access

A synchrotron X-ray and electron backscatter diffraction based investigation on deformation and failure micro-mechanisms of monotonic and cyclic loading in titanium

Atasi Ghosh, Heinz-Guenter Brokmeier, Nowfal Al-Hamdany, Subhasis Sinha, Norbert Schell, Nilesh Gurao

Abstract

Synchrotron X-ray diffraction technique has been used to estimate defect structure in terms of dislocationdensity, crystallite size and micro-strain in commercially pure titanium subjected to tension and cyclic deformationin stress and strain control mode. Statistical analysis of micro-texture data collected from electronbackscatter diffraction approximately from the same region as that of synchrotron X-ray has been used to correlateorientation dependent micro-strain and dislocation density with deformation microstructure and microtexture.Two different orientations, namely, A with prismatic-pyramidal and B with basal orientation along theloading axis has been considered. Weak initial texture yet significant anisotropy in hardening/softening responseand failure mode for monotonic tension and cyclic loading paths has been observed. Higher strain hardeningresponse of orientation A during monotonic tensile deformation can be attributed to the evolution of lowermicro-strain on basal orientation grains i.e, 〈0002〉ǁND along with extensive multi-variant twinning that alsorestricts crack propagation and delays failure in stress control mode. On the other hand, in strain control mode,orientation B shows higher fatigue life due to the generation of lower micro-strain in the basal orientation grainsand single variant twinning that can undergo detwinning easily is responsible for delayed crack nucleation andsubsequent failure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Titanium Alloys Microstructure and Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Dieter · 1986 · 344
2. Modelling of work hardening and stress saturation in FCC metals10.1016/S0079-6425(97)00032-7 ↗
3. Randle · 2000 · 352
4. Texture and texture analysis in engineering materials
5. The new loading device for texture measurement on the neutron diffractometer TEX-210.1107/S0021889896003068 ↗
6. On the measure of dislocation densities from diffraction line profiles: a comparison with discrete dislocation methods10.1016/j.actamat.2011.10.037 ↗
7. X-ray diffraction line profile analysis for defect study in Cu-1 wt% Cr-0.1 wt% Zr alloy10.1016/j.matchar.2004.09.009 ↗
8. Dislocation density evolution of AA 7020-T6 investigated by in-situ synchrotron diffraction under tensile load10.1016/j.matchar.2015.09.004 ↗
9. Microstructural investigation of plastically deformed Ti20Zr20Hf20Nb20Ta20 high entropy alloy by X-ray diffraction and transmission electron microscopy10.1016/j.matchar.2015.08.007 ↗
10. Burgers vector population, dislocation types and dislocation densities in single grains extracted from a polycrystalline commercial-purity Ti specimen by X-ray line-profile analysis10.1016/j.scriptamat.2010.03.016 ↗
11. Characterisation of microstructure of severely deformed titanium by x-ray diffraction profile analysis10.4028/www.scientific.net/MSF.414-415.229 ↗
12. Grain to grain slip activity in plastically deformed Zr determined by X-ray micro-diffraction line profile analysis10.1016/j.actamat.2006.09.031 ↗
13. Quantification of dislocation densities in zirconium hydride by X-ray line profile analysis10.1016/j.actamat.2016.06.058 ↗
14. A comparison of EBSD based strain indicators for the study of Fe-3Si steel subjected to cyclic loading10.1016/j.matchar.2016.03.020 ↗
15. Cyclic creep acceleration and retardation in polycrystalline copper tested at ambient temperature10.1016/0001-6160(84)90142-1 ↗
16. Microscopic analysis of the influence of ratcheting on the evolution of dislocation structures observed in AISI 316L stainless steel during low cycle fatigue10.1016/j.msea.2013.08.041 ↗
17. Investigation of uniaxial low-cycle fatigue failure behavior of hot-rolled AZ91 magnesium alloy10.1016/j.ijfatigue.2012.10.010 ↗
18. Effect of initial orientation on the tensile properties of commercially pure titanium10.1080/14786435.2016.1165873 ↗
19. The use of the Pseudo-Voigt function in the variance method of X-ray line broadening analysis10.1107/S0021889896015464 ↗
20. Effect of crystallographic texture on ratcheting response of commercially pure titanium10.1016/j.matdes.2016.11.052 ↗
21. The role of crystallographic texture on load reversal and low cycle fatigue performance of commercially pure titanium10.1016/j.msea.2017.03.043 ↗
22. The crystallography and deformation modes of hexagonal close packed metals10.1179/imr.1967.12.1.169 ↗
23. Failure analysis of a commercially pure titanium plate for osteosynthesis10.1016/S1350-6307(02)00067-5 ↗
24. Effect of initial orientation on twinning in commercially pure titanium10.1080/14786435.2017.1279364 ↗
25. Dislocation evolution in 316L stainless steel subjected to uniaxial ratchetting deformation10.1016/j.msea.2010.06.020 ↗
26. Orientation dependence of cyclic deformation in high purity titanium single crystals10.1016/0921-5093(94)90352-2 ↗
27. Evaluation of fatigue crack growth in -αTitanium alloys10.1016/j.mspro.2016.03.009 ↗