On the elasto-viscoplastic behavior of the Ti5553 alloy
Source abstract
Abstract
The elastoviscoplastic behavior of the Ti5553 alloy is characterized and compared to the classical Ti-6Al-4V alloy. The true stress-strain curves are determined based on tensile tests performed under different strain rates at room temperature and at 150°C, from which the elastic constants and the parameters of a Norton-Hoff viscoplastic model are identified. The strength of the Ti5553 alloy is 20-40% higher than the strength of the Ti-6Al-4V alloy. The Ti5553 alloy constitutes thus a promising candidate for advanced structural applications. In view of modeling structural applications of forming operations, the elastic and plastic initial anisotropy of the two alloys is investigated by combining compression on cylinders with elliptical sections, uniaxial tensile tests in different material directions, plane strain and shear tests. The initial anisotropy of the different alloys is very weak which justifies the modeling of the mechanical behavior with an isotropic yield surface. The identified elastoviscoplastic model is validated by comparing experimental results with FE predictions both on cylindrical notched specimens subjected to tensile tests and on flat specimens subjected to plane strain conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Boyer · J. Mater. Eng. Perform. · 2005 · 14 · 68110.1361/105994905X75448 ↗
2. Arrazola · J. Mater. Process. Technol. · 2009 · 209 · 222310.1016/j.jmatprotec.2008.06.020 ↗
3. Cotton · 2007 · 1 · 471
4. Lütjering · 2007
5. Jackson · Mater. Sci. Eng. A · 2009 · 501 · 24810.1016/j.msea.2008.09.071 ↗
6. Moureaux · J. Phys. IV—Proc. · 2002 · 12 · 361
7. Boyer · 1994 · 483
8. Lutjering · 2003
9. Semiatin · Mater. Sci. Eng. A · 1998 · 243 · 110.1016/S0921-5093(97)00776-4 ↗
10. Ding · Mater. Sci. Eng.: A · 2002 · 327 · 23310.1016/S0921-5093(01)01531-3 ↗
11. Y. Millet, Journées Technologiques Titane 2007, The French Titanium Association, Nantes, France.
12. J.J. Brioist, Ph.D. thesis, Ecole Nationale Supérieure des Mines de Paris, 1995.
13. Baufeld · Sci. Technol. Adv. Mater. · 2009 · 10 · 146810.1088/1468-6996/10/1/015008 ↗
14. Kierzkowska · J. Achiev. Mater. Manuf. Eng. · 2006 · 18 · 139
15. Hong · Trans. Nonferrous Met. Soc. China · 2007 · 17 · 218
16. M. Vanderhasten, Ph.D. thesis, KUL, Belgium, 2007.
17. Bruno · Meas. Sci. Technol. · 1997 · 8 · 124410.1088/0957-0233/8/11/006 ↗
18. Queheillalt · Metall. Mater. Trans. A: Phys. Metall. Mater. Sci. · 2000 · 31 · 26110.1007/s11661-000-0070-x ↗
19. Venkatesh · Metall. Mater. Trans. A · 2001 · 32 · 113110.1007/s11661-001-0124-8 ↗
20. A. Modgil, Master thesis, University of Florida, 2003.
21. Vanderhasten · Mater. Des. · 2008 · 29 · 109010.1016/j.matdes.2007.06.005 ↗
22. F.H. Norton, Mc Grow-Hill, The Creep of Steel at High Temperature, New-York, 1929, p. 219.
23. Hoff · Q. Appl. Mech. · 1954 · 12 · 49
24. Nelder · Comput. J. · 1965 · 7 · 30810.1093/comjnl/7.4.308 ↗
25. Hall · Proc. Phys. Soc. B · 1951 · 64 · 74710.1088/0370-1301/64/9/303 ↗
26. Semiatin · Acta Mater. · 2001 · 49 · 356510.1016/S1359-6454(01)00236-1 ↗
27. Venkatesh · Mater. Sci. Eng. A · 2009 · 506 · 11710.1016/j.msea.2008.11.018 ↗
28. Yulan · Mater. Sci. Forum · 2009 · 618–619 · 169
29. Petch · J. Iron Steel Inst. · 1953 · 174 · 25
30. Delincé · Acta Mater. · 2007 · 55 · 233710.1016/j.actamat.2006.11.029 ↗
31. H. Pijlman, Ph.D., University of Twente, Netherlands, 2002.
32. Flores · Adv. Exp. Mech. IV · 2005 · 91
33. Flores · Int. J. Form. Process. · 2005 · 117
34. Flores · J. Mater. Process. Technol. · 2010 · 210 · 177210.1016/j.jmatprotec.2010.06.008 ↗
35. G. Gilles, V. Tuninetti, M. Ben Bettaieb, O. Cazacu, A.M. Habraken, L. Duchêne., Numisheet, 2011.
36. P. Flores, Ph.D. thesis, University of Liège, Belgium, 2005.
37. Gilles · Int. J. Solids Struct. · 2011 · 48 · 127710.1016/j.ijsolstr.2011.01.011 ↗
38. Cazacu · Int. J. Plast. · 2006 · 22 · 117110.1016/j.ijplas.2005.06.001 ↗
39. B. Plunkett, O. Cazacu, F. Barlat, Int. J. Plast. 24 (2008) 847–866.10.1016/j.ijplas.2007.07.013 ↗
40. Nixon · Int. J. Plast. · 2010 · 26 · 51610.1016/j.ijplas.2009.08.007 ↗
41. Zhu · J. Mater. Process. Technol. · 1992 · 32 · 19710.1016/0924-0136(92)90177-T ↗
42. ABAQUS 6.9, Simulia, Inc., Providence, RI, USA, 2009.